diff options
Diffstat (limited to 'src/RELEASE.txt')
| -rw-r--r-- | src/RELEASE.txt | 1098 |
1 files changed, 80 insertions, 1018 deletions
diff --git a/src/RELEASE.txt b/src/RELEASE.txt index dc81584..d8fdd9f 100644 --- a/src/RELEASE.txt +++ b/src/RELEASE.txt @@ -1,1049 +1,111 @@ -# Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation -# src/RELEASE.txt 4720 2010/03/24 03:14:11 jars + A new SCons checkpoint release, 2.0.0.final.0, is now available + on the SCons download page: + http://www.scons.org/download.php - SCons - a software construction tool + The primary purpose of this release is to remove support for Python + versions prior to 2.4 and streamline the SCons code base using more + modern python idioms. - Release Notes + IMPORTANT: In 1.3.0 and 2.0.0, explicit dependencies (configured via + the Depends() call) are ignored for any nodes that do not have builders. + This known issue[1] will typically only happen if you explicitly + configure a builder call to create multiple output files, some of which + are "hidden" from SCons by not being listed in the targets list, and then + use Depends() to establish an explicit dependency on a "hidden" file. + [1] See http://scons.tigris.org/issues/show_bug.cgi?id=2647 for details. -This is SCons, a tool for building software (and other files). SCons is -implemented in Python, and its "configuration files" are actually Python -scripts, allowing you to use the full power of a real scripting language -to solve build problems. You do not, however, need to know Python to -use SCons effectively. + A SCons "checkpoint release" is intended to provide early access to + new features so they can be tested in the field before being released + for adoption by other software distributions. -So that everyone using SCons can help each other learn how to use it -more effectively, please sign up for the scons-users mailing list using -the instructions on the following page: + Note that a checkpoint release is developed using the same test-driven + development methodology as all SCons releases. Existing SCons + functionality should all work as it does in previous releases (except + for any changes identified in the release notes) and early adopters + should be able to use a checkpoint release safely for production work + with existing SConscript files. If not, it represents not only a bug + in SCons but also a hole in the regression test suite, and we want to + hear about it. - http://scons.org/lists.php + New features may be more lightly tested than in past releases, + especially as concerns their interaction with all of the other + functionality in SCons. We are especially interested in hearing bug + reports about new functionality. + We do not recommend that downstream distributions (Debian, Fedora, + etc.) package a checkpoint release, mainly to avoid confusing the + "public" release numbering with the long checkpoint release names. + Here is a summary of the changes since 1.3: -RELEASE 1.3.0 - Tue, 23 Mar 2010 21:44:19 -0400 + NEW FUNCTIONALITY - Please consult the CHANGES.txt file for a list of specific changes - since last release. + - There should be no new functionality or bug fixes in this checkpoint. + Bug fixes will be found in the 1.3.1 series of checkpoints. - Please note the following important changes in this release: + DEPRECATED FUNCTIONALITY - -- DEPRECATED FEATURES WILL GENERATE MANDATORY WARNINGS IN 1.3.0 + - All features or usages deprecated in 1.3 should have been removed. + Uses of formerly-deprecated features should get an error. - In keeping with our deprecation cycle, the following deprecated - features will still be supported in 1.3.0 but will generate - mandatory, non-disableable warnings: + - The BuildDir() method and the build_dir option now get warnings. - -- Support for Python versions 1.5, 1.6, 2.0, 2.1, 2.2, and 2.3. - -- The overrides= keyword argument to the Builder() call. - -- The scanner= keyword argument to the Builder() call. - -- The BuildDir() function and env.BuildDir() method. - -- The env.Copy() method. - -- The SourceSignatures() function and - env.SourceSignatures() method. - -- The TargetSignatures() function and - env.TargetSignatures() method. - -- The Sig module (now an unnused stub). - -- The --debug=dtree, --debug=stree and --debug=tree options. - -- The --debug=nomemoizer option. - -- The Options object and the related BoolOption(), - EnumOption(), ListOption(), PackageOption() and - PathOption() functions. + - The SourceCode() function and its associated factory functions have + started their deprecation cycle and can have a warning enabled. - The mandatory warnings will be issued in order to make sure - users of 1.3.0 notice *prior* to the release of SCons 2.0.0, that - these features will be removed. In SCons 2.0.0 these features - will no longer work at all, and will instead generate specific - fatal errors when anyone tries to use them. + CHANGED/ENHANCED EXISTING FUNCTIONALITY - Please note the following important changes since release 1.2.0: + - Any Command() or env.Command() calls that use the following Action + factory functions will have their targets rebuilt when upgrading + from any pre-2.0 release: - -- Support for Latex glosseries and acronyms has been added + Chmod() + Copy() + Delete() + Mkdir() + Move() + Touch() - -- MICROSOFT VISUAL STUDIO VERSION/ARCH DETECTION HAS CHANGED + (The rebuild occurs because the underlying Python class that + implements these functions has been changed to a new-style Python + class, and that changes the Python byte code and therefore the + build signature of the functions.) - The way SCons detects Visual Studio on Windows has changed in - 1.3. By default, it should now use the latest installed - Visual Studio version on your machine, and compile for 32 or - 64 bits according to whether your OS is 32 or 64 bits (32/64 - bit python makes no difference). + FIXES - Two new variables control Visual Studio: MSVC_VERSION and - TARGET_ARCH. These variables ONLY take effect when passed to - the Environment() constructor; setting them later has no - effect. To use a non-default Visual Studio version, set - MSVC_VERSION to e.g. "8.0" or "7.1". Setting it to "xxx" (or - any nonexistent value) will make it print out the valid - versions on your system. To use a non-default architecture, - set TARGET_ARCH to "x86" or "x86_64" (various synonyms are - accepted). + - MSVC/MSVS/SDK support has been improved. A number of issues with + determining the correct version and architecture have been resolved. - In addition, MSVC_USE_SCRIPT can be used to bypass the - above autodetection; setting it to the path of a Visual - Studio .bat file (e.g. vcvars.bat) will cause SCons to - run that bat file and extract the relevant variables - from the result (typically %INCLUDE%, %LIB%, and %PATH%). - Setting MSVC_USE_SCRIPT to None bypasses the Visual Studio - autodetection entirely; use this if you are importing - the shell env and running SCons in a Visual Studio cmd window. + IMPROVEMENTS - Note that if you use MSVS_VERSION to build Visual Studio - projects from your SConstructs, MSVS_VERSION must be set to - the same version as MSVC_VERSION. + - Support for Python versions prior to 2.4 has been removed. As of + this writing, we believe that SCons will still work with Python 2.3, + but this is not guaranteed. + - Code paths that included special cases for older Python versions have + been streamlined. + - The code base has been converted to use more modern idioms. Although + we don't have any direct measurements (yet), we believe that SCons + startup time should be decreased and the overall code should run faster. - Support for HOST_OS,HOST_ARCH,TARGET_OS, TARGET_ARCH has been - added to allow specifying different target arch than the host - system. This is only supported for Visual Studio/Visual C++ - at this time. + PACKAGING - -- VISUAL C/C++ PRECOMPILED HEADERS WILL BE REBUILT + - No changes. - Precompiled header files built with Visual C/C++ will be - rebuilt after upgrading from 1.2.0 to a later release. + DOCUMENTATION - This rebuild is normal and will occur because the command line - defined by the $PCHCOM construction variable has had the $CCFLAGS - variable added, and has been rearranged to put the "/Fo" output - flag towards the beginning of the line, consistent with the - related command lines for $CCCOM, $CXXCOM, etc. + - The entries for SourceCode() and its associated factory functions now + state that the functions are deprecated. - -- CHANGES TO SOME LINKER COMMAND LINES WILL CAUSE RELINKING + DEVELOPMENT - Changes to the command line definitions for the Microsoft link.exe - linker, the OS/2 ilink linker and the Phar Lap linkloc linker - will cause targets built with those tools be to be rebuilt after - upgrading from 1.2.0 to a later release. + - Code no longer has to be compatible with Python versions back to 1.5.2. + Although code is tested with Python 2.3 and is still believed to work, + the official new floor is Python 2.4. - This relink is normal and will occur because the command lines for - these tools have been redefined to remove unnecessary nested $( - and $) character strings. - - -- MSVS_USE_MFC_DIRS and MSVS_IGNORE_IDE_PATHS are obsoleted and - have no effect. - - Please note the following important changes since release 1.1.0: - - -- THE $CHANGED_SOURCES, $CHANGED_TARGETS, $UNCHANGED_SOURCES - AND $UNCHANGED_TARGETS VARIABLES WILL BECOME RESERVED - - A future release (probably 1.3.0) will make the construction - variable names $CHANGED_SOURCES, $CHANGED_TARGETS, - $UNCHANGED_SOURCES and $UNCHANGED_TARGETS into reserved - construction variable names controlled by SCons itself (like - the current $SOURCE, $TARGETS, etc.). - - Setting these variable names in the current release will generate - a warning but still set the variables. When they become reserved - variable names, they will generate a different warning message - and attempts to set these variables will be ignored. - - SCons configurations that happen to use these variable names - should be changed to use different variable names, in order - to ensure that the configuration continues to work with future - versions of SCons. - - -- THE Options OBJECT AND RELATED FUNCTIONS NOW GENERATE WARNINGS - - Use of the Options object, and related functions BoolOption(), - EnumOption(), ListOption(), PackageOption() and PathOption() - were announced as deprecated in release 0.98.1. Since then, - however, no warning messages were ever implemented for the - use of these deprecated functions. - - By default, release 1.2.0 prints warning messages when these - deprecated features are used. Warnings about all deprecated - features may be suppressed by using the --warn=no-deprecated - command-line option: - - $ scons --warn=no-deprecated - - Or by using the appropriate SetOption() call in any SConscript - file: - - SetOption('warn', 'no-deprecated') - - You may optionally disable just warnings about the deprecation - of the Options object and its related functions as follows: - - SetOption('warn', 'no-deprecated-options') - - The current plan is for these warnings to become mandatory - (non-suppressible) in release 1.3.0, and for the use of Options - and its related functions to generate errors in release 2.0. - - Please note the following important changes since release 0.98.4: - - -- scons.bat NOW RETURNS THE REAL SCONS EXIT STATUS - - The scons.bat script shipped with SCons used to exit with - a status of 1 when it detected any failed (non-zero) exit - status from the underlying Python execution of SCons itself. - The scons.bat script now exits with the actual status - returned by SCons. - - -- SCONS NOW WARNS WHEN TRYING TO LINK C++ AND FORTRAN OBJECT FILES - - Some C++ toolchains do not understand Fortran runtimes and create - unpredictable executables when linking C++ and Fortran object - files together. SCons now issues a warning if you try to link - C++ and Fortran object files into the same executable: - - scons: warning: Using $CXX to link Fortran and C++ code together. - This may generate a buggy executable if the '/usr/bin/gcc' - compiler does not know how to deal with Fortran runtimes. - - The warning may be suppressed with either the --warning=no-link - or --warning=no-fortran-cxx-mix command line options, or by - adding either of the following lines to a SConscript file: - - SetOption('warn', 'no-link') - SetOption('warn', 'no-fortran-cxx-mix') - - Please note the following important changes since release 0.98: - - -- SCONS NO LONGER SETS THE GNU TOOLCHAIN -fPIC FLAG IN $SHCXXFLAGS - - The GNU toolchain support in previous versions of SCons would - add the -fPIC flag to the $SHCXXFLAGS construction variable. - The -fPIC flag has been now been removed from the default - $SHCXXFLAGS setting. Instead, the $SHCXXCOM construction variable - (the default SCons command line for compiling shared objects - from C++ source files) has been changed to add the $SHCCFLAGS - variable, which contains the -fPIC flag. - - This change was made in order to make the behavior of the default - C++ compilation line including $SHCCFLAGS consistent with the - default C compilation line including $CCFLAGS. - - This change should have no impact on configurations that use - the default $SHCXXCOM command line. It may have an impact on - configurations that were using the default $SHCXXFLAGS value - *without* the $SHCCFLAGS variable to get the -fPIC flag into a - custom command line. You can fix these by adding the $SHCCFLAGS - to the custom command line. - - Adding $SHCCFLAGS is backwards compatible with older SCons - releases, although it might cause the -fPIC flag to be repeated - on the command line if you execute it on an older version of - SCons that sets -fPIC in both the $SHCCLAFGS and $SHCXXFLAGS - variables. Duplicating the -fPIC flag on the g++ command line - will not cause any compilation problems, but the change to the - command line may cause SCons to rebuild object files. - - -- FORTRAN NOW COMPILES .f FILES WITH gfortran BY DEFAULT - - The Fortran Tool modules have had a major overhaul with the intent - of making them work as-is for most configurations. In general, - most configurations that use default settings should not see - any noticeable difference. - - One configuration that has changed is if you have both a gfortran - and g77 compiler installed. In this case, previous versions of - SCons would, by default, use g77 by default to compile files with - a .f suffix, while SCons 0.98.1 will use the gfortran compiler - by default. The old behavior may be preserved by explicitly - initializing construction environments with the 'g77' Tool module: - - env = Environment(tools = ['g77', 'default']) - - The above code is backwards compatible to older versions of SCons. - - If you notice any other changes in the behavior of default - Fortran support, please let us know so we can document them in - these release notes for other users. - - Please note the following important changes since release 0.97.0d20071212: - - -- SUPPORT FOR PYTHON VERSIONS BEFORE 2.2 IS NOW DEPRECATED - - SCons now prints the following warning when it is run by any - Python 1.5, 2.0 or 2.1 release or sub-release: - - scons: warning: Support for pre-2.2 Python (VERSION) is deprecated. - If this will cause hardship, contact dev@scons.tigris.org. - - You may disable all warnings about deprecated features by adding - the option "--warn=no-deprecated" to the command line or to the - $SCONSFLAGS environment variable: - - $ scons --warn=no-deprecated - - Using '--warn=no-deprecated' is compatible with earlier versions - of SCons. - - You may also, as of this version of SCons, disable all warnings - about deprecated features by adding the following to any - SConscript file: - - SetOption('warn', 'no-deprecated') - - You may disable only the specific warning about running under - a deprecated Python version by adding the following to any - SConscript file: - - SetOption('warn', 'no-python-version') - - The warning may also be suppressed on the command line: - - $ scons --warn=no-python-version - - Or by specifying the --warn=no-python-version option in the - $SCONSFLAGS environment variable. - - Using SetOption('warn', ...), and the 'no-python-version' - command-line option for suppressing this specific warning, - are *not* backwards-compatible to earlier versions of SCons. - - -- THE env.Copy() METHOD IS NOW OFFICIALLY DEPRECATED - - The env.Copy() method is now officially deprecated and will - be removed in a future release. Using the env.Copy() method - now generates the following message: - - scons: warning: The env.Copy() method is deprecated; use the env.Clone() method instead. - - You may disable all warnings about deprecated features by adding - the option "--warn=no-deprecated" to the command line or to the - $SCONSFLAGS environment variable: - - $ scons --warn=no-deprecated - - Using '--warn=no-deprecated' is compatible with earlier versions - of SCons. - - You may also, as of this version of SCons, disable all warnings - about deprecated features by adding the following to any - SConscript file: - - SetOption('warn', 'no-deprecated') - - You may disable only the specific warning about the deprecated - env.Copy() method by adding the following to any SConscript - file: - - SetOption('warn', 'no-deprecated-copy') - - The warning may also be suppressed on the command line: - - $ scons --warn=no-deprecated-copy - - Or by specifying the --warn=no-deprecated-copy option in the - $SCONSFLAGS environment variable. - - Using SetOption('warn', ...), and the 'no-deprecated-copy' - command-line option for suppressing this specific warning, - are *not* backwards-compatible to earlier versions of SCons. - - -- THE --debug=dtree, --debug=stree AND --debug=tree OPTIONS ARE DEPRECATED - - The --debug=dtree, --debug=stree and --debug=tree methods - are now officially deprecated and will be removed in a - future release. Using these options now generate a warning - message recommending use of the --tree=derived, --tree=all,status - and --tree=all options, respectively. - - You may disable these warnings, and all warnings about - deprecated features, by adding the option "--warn=no-deprecated" - to the command line or to the $SCONSFLAGS environment - variable: - - $ scons --warn=no-deprecated - - Using '--warn=no-deprecated' is compatible with earlier versions - of SCons. - - -- THE TargetSignatures() AND SourceSignatures() FUNCTIONS ARE DEPRECATED - - The TargetSignatures() and SourceSignatures() functions, - and their corresponding env.TargetSignatures() and - env.SourceSignatures() methods, are now officially deprecated - and will be be removed in a future release. Using ahy of - these functions or methods now generates a message - similar to the following: - - scons: warning: The env.TargetSignatures() method is deprecated; - convert your build to use the env.Decider() method instead. - - You may disable all warnings about deprecated features by adding - the option "--warn=no-deprecated" to the command line or to the - $SCONSFLAGS environment variable: - - $ scons --warn=no-deprecated - - Using '--warn=no-deprecated' is compatible with earlier versions - of SCons. - - You may also, as of this version of SCons, disable all warnings - about deprecated features by adding the following to any - SConscript file: - - SetOption('warn', 'no-deprecated') - - You may disable only the specific warning about the use of - TargetSignatures() or SourceSignatures() by adding the - following to any SConscript file: - - SetOption('warn', 'no-deprecated-target-signatures') - SetOption('warn', 'no-deprecated-source-signatures') - - The warnings may also be suppressed on the command line: - - $ scons --warn=no-deprecated-target-signatures --warn=no-deprecated-source-signatures - - Or by specifying these options in the $SCONSFLAGS environment - variable. - - Using SetOption('warn', ...), or the command-line options - for suppressing these warnings, is *not* backwards-compatible - to earlier versions of SCons. - - -- File(), Dir() and Entry() NOW RETURN A LIST WHEN THE INPUT IS A SEQUENCE - - Previously, if these methods were passed a list, the list was - substituted and stringified, then passed as a single string to - create a File/Dir/Entry Node. This rarely if ever worked with - more than one element in the list. They now return a list of - Nodes when passed a list. - - One case that works differently now is a passing in a - single-element sequence; that formerly was stringified - (returning its only element) and then a single Node would be - returned. Now a single-element list containing the Node will - be returned, for consistency. - - -- THE env.subst() METHOD NOW RETURNS A LIST WHEN THE INPUT IS A SEQUENCE - - The env.subst() method now returns a list with the elements - expanded when given a list as input. Previously, the env.subst() - method would always turn its result into a string. - - This behavior was changed because it interfered with being able - to include things like lists within the expansion of variables - like $CPPPATH and then have SCons understand that the elements - of the "internal" lists still needed to be treated separately. - This would cause a $CPPPATH list like ['subdir1', 'subdir'] - to show up in a command line as "-Isubdir1 subdir". - - -- THE Jar() BUILDER NOW USES THE Java() BUILDER CLASSDIR BY DEFAULT - - By default, the Jar() Builder will now use the class directory - specified when the Java() builder is called. So the following - input: - - classes = env.Java('classes', 'src') - env.Jar('out.jar', classes) - - Will cause "-C classes" to be passed the "jar" command invocation, - and the Java classes in the "out.jar" file will not be prefixed - "classes/". - - Explicitly setting the $JARCHDIR variable overrides this default - behavior. The old behavior of not passing any -C option to the - "jar" command can be preserved by explicitly setting $JARCHDIR - to None: - - env = Environment(JARCHDIR = None) - - The above setting is compatible with older versions of SCons. - - Please note the following important changes since release 0.97.0d20070918: - - -- SCons REDEFINES PYTHON open() AND file() ON Windows TO NOT PASS - ON OPEN FILE HANDLES TO CREATED PROCESSES - - On Windows systems, SCons now redefines the Python open() - and file() functions so that, if the Python Win32 extensions - are available, the file handles for any opened files will *not* - be inherited by subprocesses, such as the spawned compilers and - other tools invoked to build the software. - - This prevents certain race conditions where a file handle for - a file opened by Python (either in a Python function action, - or directly in a SConscript file) could be inherited and help - open by a subprocess, interfering with the ability of other - processes to create or modify the file. - - In general, this should not cause problems for the vast majority - of configurations. The only time this would be a problem would be - in the unlikely event that a process spawned by SCons specifically - *expected* to use an inherited file handle opened by SCons. - - If the Python Win32 extensions are not installed or are an - earlier version that does not have the ability to disable file - handle inheritance, SCons will print a warning message when the - -j option is used. The warning message may be suppressed by - specifying --warn=no-parallel-support. - - Please note the following important changes since release 0.97.0d20070809: - - -- "content" SIGNATURES ARE NOW THE DEFAULT BEHAVIOR - - The default behavior of SCons is now to use the MD5 checksum of - all file contents to decide if any files have changed and should - cause rebuilds of their source files. This means that SCons may - decide not to rebuild "downstream" targets if a a given input - file is rebuilt to the exact same contents as the last time. - The old behavior may preserved by explicity specifying: - - TargetSignatures("build") - - In any of your SConscript files. - - -- TARGETS NOW IMPLICITLY DEPEND ON THE COMMAND THAT BUILDS THEM - - For all targets built by calling external commands (such as a - compiler or other utility), SCons now adds an implicit dependency - on the command(s) used to build the target. - - This will cause rebuilds of all targets built by external commands - when running SCons in a tree built by previous version of SCons, - in order to update the recorded signatures. - - The old behavior of not having targets depend on the external - commands that build them can be preserved by setting a new - $IMPLICIT_COMMAND_DEPENDENCIES construction variable to a - non-True value: - - env = Environment(IMPLICIT_COMMAND_DEPENDENCIES = 0) - - or by adding Ignore() calls for any targets where the behavior - is desired: - - Ignore('/usr/bin/gcc', 'foo.o') - - Both of these settings are compatible with older versions - of SCons. - - -- CHANGING SourceSignature() MAY CAUSE "UNECESSARY" REBUILDS - - If you change the SourceSignature() value from 'timestamp' to - 'MD5', SCons will now rebuild targets that were already up-to-date - with respect to their source files. - - This will happen because SCons did not record the content - signatures of the input source files when the target was last - built--it only recorded the timestamps--and it must record them - to make sure the signature information is correct. However, - the content of source files may have changed since the last - timestamp build was performed, and SCons would not have any way to - verify that. (It would have had to open up the file and record - a content signature, which is one of the things you're trying to - avoid by specifying use of timestamps....) So in order to make - sure the built targets reflect the contents of the source files, - the targets must be rebuilt. - - Change the SourceSignature() value from 'MD5' to 'timestamp' - should correctly not rebuild target files, because the timestamp - of the files is always recorded. - - In previous versions of SCons, changing the SourceSignature() - value would lead to unpredictable behavior, usually including - rebuilding targets. - - -- THE Return() FUNCTION NOW ACTUALLY RETURNS IMMEDIATELY - - The Return() function now immediately stops processing the - SConscript file in which it appears and returns the values of the - variables named in its arguments. It used to continue processing - the rest of the SConscript file, and then return the values of the - specified variables at the point the Return() function was called. - - The old behavior may be requested by adding a "stop=False" - keyword argument to the Return() call: - - Return('value', stop=False) - - The "stop=" keyword argument is *not* compatible with SCons - versions 0.97.0d20070809 or earlier. - - Please note the following important changes since release 0.97: - - -- env.CacheDir() NOW ONLY AFFECTS CONSTRUCTION ENVIRONMENT TARGETS - - The env.CacheDir() method now only causes derived files to be - retrieved from the specified cache directory for targets built - with the specified specified construction environment ("env"). - - Previously, any call to env.CacheDir() or CacheDir() would modify - a global setting and cause all built targets to be retrieved - from the specified cache directory. This behavior was changed so - that env.CacheDir() would be consistent with other construction - environment methods, which only affect targets built with the - specified construction environment. - - The old behavior of changing the global behavior may be preserved - by changing any env.CacheDir() calls to: - - CacheDir('/path/to/cache/directory') - - The above change is backwards-compatible and works in all earlier - versions of SCons that support CacheDir(). - - -- INTERPRETATION OF SUFFIX-LESS SOURCE ARGUMENTS HAS CHANGED - - The interpretation of source arguments (files) without suffixes - has changed in one specific configuration. - - Previously, if a Builder had a src_suffix specified (indicating - that source files without suffixes should have that suffix - appended), the suffix would only be applied to suffix-less source - arguments if the Builder did *not* have one or more attached - source Builders (that is, the Builder was not a "multi-stage" - Builder). So in the following configuration: - - build_foo = Builder(src_suffix = '.foo') - build_bar = Builder(src_suffix = '.bar', - src_builder = build_bar) - - env = Environment(BUILDERS = { - 'Foo' : build_foo, - 'Boo' : build_bar, - }) - - env.Foo('tgt1', 'src1') - env.Bar('tgt2', 'src2') - - SCons would have expected to find a source file 'src1.foo' for the - env.Foo() call, but a source file 'src2' for the env.Bar() call. - - This behavior has now been made consistent, so that the two - above calls would expect source files named 'src1.foo' and - 'src2.bar', respectively. - - Note that, if genuinely desired, the old behavior of building - from a source file without a suffix at all (when the Builder has - a src_suffix *and* a src_builder) can be specified explicity by - turning the string into a File Node directly: - - env.Bar('tgt2', File('src2')) - - The above use of File() is backwards-compatible and will work - on earlier versions of SCons. - - -- THE DEFAULT EXECUTION PATH FOR Solaris HAS CHANGED - - On Solaris systems, SCons now adds the "/opt/SUNWspro/bin" - directory to the default execution $PATH variable before the - "/usr/ccs/bin" directory. This was done to reflect the fact - that /opt/SUNWspro/ is the default for SUN tools, but it may - cause a different compiler to be used if you have compilers - installed in both directories. - - -- GENERATED config.h FILES NOW SAY "#define HAVE_{FEATURE} 1" - - When generating a "config.h" file, SCons now defines values that - record the existence of a feature with a "1" value: - - #define HAVE_FEATURE 1 - - Instead of printing the line without a "1", as it used to: - - #define HAVE_FEATURE - - This should not cause any problems in the normal use of "#ifdef - HAVE_{FEATURE}" statements interpreted by a C preprocessor, but - might cause a compatibility issue if a script or other utility - looks for an exact match of the previous text. - - Please note the following planned, future changes: - - -- THE Options OBJECT AND RELATED FUNCTIONS WILL BE DEPRECATED - - The Options object is being replaced by a new Variables - object, which uses a new Variables.AddVariable() method - where the previous interface used Options.AddOptions(). - - Similarly, the following utility functions are being replaced - by the following similarly-named functions: - - BoolOption() BoolVariable() - EnumOption() EnumVariable() - ListOption() ListVariable() - PackageOption() PackageVariable() - PathOption() PathVariable() - - And also related, the options= keyword argument when creating - construction environments with the Environment() functions is - being replaced with a variables= keyword argument. - - In some future release a deprecation warning will be added to - existing uses of the Options object, its methods, the above - utility functions, and the options= keyword argument of the - Environment() function. At some point after the deprecation - warning is added, the Options object, related functions and - options= keyword argument will be removed entirely. - - You can prepare for this by changing all your uses of the Options - object and related functions to the Variables object and the new - function names, and changing any uses of the options= keyword - argument to variables=. - - NOTE: CONVERTING TO USING THE NEW Variables OBJECT OR THE - RELATED *Variable() FUNCTIONS, OR USING THE NEW variable= - KEYWORD ARGUMENT, IS NOT BACKWARDS COMPATIBLE TO VERSIONS OF - SCons BEFORE 0.98. YOUR SConscript FILES WILL NOT WORK ON - EARLIER VERSIONS OF SCons AFTER MAKING THIS CHANGE. - - If you change SConscript files in software that you make available - for download or otherwise distribute, other users may try to - build your software with an earlier version of SCons that does - not have the Variables object or related *Variable() functions. - We recommend preparing for this in one of two ways: - - -- Make your SConscript files backwards-compatible by - modifying your calls with Python try:-except: blocks - as follows: - - try: - vars = Variables('custom.py', ARGUMENTS) - vars.AddVariables( - BoolVariable('WARNINGS', 'cmopile with -Wall', 1), - EnumVariable('DEBUG', 'debug version', 'no' - allowed_values=('yes', 'no', 'full'), - map={}, ignorecase=0), - ListVariable('SHAREDLIBS', - 'libraries to build shared', - 'all', - names = list_of_libs), - PackageVariable('X11', - 'use X11 from here', - '/usr/bin/X11'), - PathVariable('QTDIR', 'root of Qt', qtdir), - ) - except NameError: - vars = Options('custom.py', ARGUMENTS) - vars.AddOptions( - BoolOption('WARNINGS', 'cmopile with -Wall', 1), - EnumOption('DEBUG', 'debug version', 'no' - allowed_values=('yes', 'no', 'full'), - map={}, ignorecase=0), - ListOption('SHAREDLIBS', - 'libraries to build shared', - 'all', - names = list_of_libs), - PackageOption('X11', - 'use X11 from here', - '/usr/bin/X11'), - PathOption('QTDIR', 'root of Qt', qtdir), - ) - - Additionally, you can check for availability of the new - variables= keyword argument as follows: - - try: - env = Environment(variables=vars) - except TypeError: - env = Environment(options=vars) - - (Note that we plan to maintain the existing Options object - name for some time, to ensure backwards compatibility, - so in practice it may be easier to just continue to use - the old name until you're reasonably sure you won't have - people trying to build your software with versions of - SCons earlier than 0.98.1.) - - -- Use the EnsureSConsVersion() function to provide a - descriptive error message if your SConscript files - are executed by an earlier version of SCons: - - EnsureSConsVersion(0, 98, 1) - - -- THE BuildDir() METHOD AND FUNCTION WILL BE DEPRECATED - - The env.BuildDir() method and BuildDir() function are being - replaced by the new env.VariantDir() method and VariantDir() - function. - - In some future release a deprecation warning will be added - to existing uses of the env.BuildDir() method and BuildDir() - function. At some point after the deprecation warning, the - env.Builder() method and BuildDir() function will either - be removed entirely or have their behavior changed. - - You can prepare for this by changing all your uses of the - env.BuildDir() method to env.VariantDir() and uses of the - global BuildDir() function to VariantDir(). If you use a - named keyword argument of "build_dir" when calling - env.BuildDir() or BuildDir(): - - env.BuildDir(build_dir='opt', src_dir='src') - - The keyword must be changed to "variant_dir": - - env.VariantDir(variant_dir='opt', src_dir='src') - - NOTE: CHANGING USES OF env.BuildDir() AND BuildDir() to - env.VariantDir() AND VariantDir() IS NOT BACKWARDS COMPATIBLE - TO VERSIONS OF SCons BEFORE 0.98. YOUR SConscript FILES - WILL NOT WORK ON EARLIER VERSIONS OF SCons AFTER MAKING - THIS CHANGE. - - If you change SConscript files in software that you make - available for download or otherwise distribute, other users - may try to build your software with an earlier version of - SCons that does not have the env.VariantDir() method or - VariantDir() fnction. We recommend preparing for this in - one of two ways: - - -- Make your SConscript files backwards-compatible by - including the following code near the beginning of your - top-level SConstruct file: - - import SCons.Environment - try: - SCons.Environment.Environment.VariantDir - except AttributeError: - SCons.Environment.Environment.VariantDir = \ - SCons.Environment.Environment.BuildDir - - -- Use the EnsureSConsVersion() function to provide a - descriptive error message if your SConscript files - are executed by an earlier version of SCons: - - EnsureSConsVersion(0, 98) - - -- THE SConscript() "build_dir" KEYWORD ARGUMENT WILL BE DEPRECATED - - The "build_dir" keyword argument of the SConscript function - and env.SConscript() method are being replaced by a new - "variant_dir" keyword argument. - - In some future release a deprecation warning will be added - to existing uses of the SConscript()/env.SConscript() - "build_dir" keyword argument. At some point after the - deprecation warning, support for this keyword argument will - be removed entirely. - - You can prepare for this by changing all your uses of the - SConscript()/env.SConscript() 'build_dir" keyword argument: - - SConscript('src/SConscript', build_dir='opt') - - To use the new "variant_dir" keyword argument: - - SConscript('src/SConscript', variant_dir='opt') - - NOTE: USING THE NEW "variant_dir" KEYWORD IS NOT BACKWARDS - COMPATIBLE TO VERSIONS OF SCons BEFORE 0.98. YOUR SConscript - FILES WILL NOT WORK ON EARLIER VERSIONS OF SCons AFTER - MAKING THIS CHANGE. - - If you change SConscript files in software that you make - available for download or otherwise distribute, other users - may try to build your software with an earlier version of - SCons that does not support the "variant_dir" keyword. - - If you can insist that users use a recent version of SCons - that supports "variant_dir", we recommend using the - EnsureSConsVersion() function to provide a descriptive error - message if your SConscript files are executed by an earlier - version of SCons: - - EnsureSConsVersion(0, 98) - - If you want to make sure that your SConscript files will - still work with earlier versions of SCons, then your best - bet is to continue to use the "build_dir" keyword until the - support is removed (which, in all likelihood, won't happen - for quite some time). - - -- SCANNER NAMES HAVE BEEN DEPRECATED AND WILL BE REMOVED - - Several internal variable names in SCons.Defaults for various - pre-made default Scanner objects have been deprecated and will - be removed in a future revision. In their place are several new - global variable names that are now part of the publicly-supported - interface: - - NEW NAME DEPRECATED NAME - -------- ---------------------------- - CScanner SCons.Defaults.CScan - DSCanner SCons.Defaults.DScan - SourceFileScanner SCons.Defaults.ObjSourceScan - ProgramScanner SCons.Defaults.ProgScan - - Of these, only ObjSourceScan was probably used at all, to add - new mappings of file suffixes to other scanners for use by the - Object() Builder. This should now be done as follows: - - SourceFileScanner.add_scanner('.x', XScanner) - - -- THE env.Copy() METHOD WILL CHANGE OR GO AWAY ENTIRELY - - The env.Copy() method (to make a copy of a construction - environment) is being replaced by the env.Clone() method. - - As of SCons 0.98, a deprecation warning has been added to - current uses of the env.Copy() method. At some point in - the future, the env.Copy() method will either be removed - entirely or have its behavior changed. - - You can prepare for this by changing all your uses of env.Copy() - to env.Clone(), which has the exact same calling arguments. - - NOTE: CHANGING USES OF env.Copy() TO env.Clone() WILL MAKE - YOUR SConscript FILES NOT WORK ON VERSIONS OF SCons BEFORE - 0.96.93. - - If you change SConscript files in software that you make - available for download or otherwise distribute, other users - may try to build your software with an earlier version of - SCons that does not have the env.Clone() method. We recommend - preparing for this in one of two ways: - - -- Make your SConscript files backwards-compatible by - including the following code near the beginning of your - top-level SConstruct file: - - import SCons.Environment - try: - SCons.Environment.Environment.Clone - except AttributeError: - SCons.Environment.Environment.Clone = \ - SCons.Environment.Environment.Copy - - -- Use the EnsureSConsVersion() function to provide a - descriptive error message if your SConscript files - are executed by an earlier version of SCons: - - EnsureSConsVersion(0, 96, 93) - - -- THE CheckLib Configure TEST WILL CHANGE BEHAVIOR - - The CheckLib() Configure test appends the lib(s) to the - Environment's LIBS list in 1.3 and earlier. In 1.3 there is a - new CheckLib argument, append, which defaults to True to - preserve the old behavior. In a future release, append will - be changed to default to False, to conform with autoconf and - user expectations, since it is usually used to build up - library lists in a right-to-left way. - - - - SCons is developed with an extensive regression test suite, and a - rigorous development methodology for continually improving that suite. - Because of this, SCons is of sufficient quality that you can use it - for real work. - - The interfaces in release 1.0 will *not* be knowingly changed in - any new, future 1.x release. If an interface change should ever - become necessary due to extraordinary circumstances, the change - and an appropriate transition strategy will be documented in these - RELEASE notes. - - As you use SCons, please heed the following: - - - Please report any bugs or other problems that you find to our bug - tracker at our SourceForge project page: - - http://sourceforge.net/tracker/?func=add&group_id=30337&atid=398971 - - We have a reliable bug-fixing methodology already in place and - strive to respond to problems relatively quickly. - - - Documentation is spottier than we'd like. You may need to dive - into the source code to figure out how to do something. Asking - questions on the scons-users mailing list is also welcome. We - will be addressing the documentation in upcoming releases, but - would be more than glad to have your assistance in correcting this - problem... :-) - - - The "SCons Design" documentation on the SCons web site is very - out of date, as we made significant changes to portions of the - interface as we figured out what worked and what didn't during the - extensive beta implementation. The "SCons Design" document should - be used only for historical purposes, or for just an extremely - general understanding of SCons' architectural goals. - - - There may be performance issues. Improving SCons performance - is an ongoing priority. If you still find the performance - unacceptable, we would very much like to hear from you and learn - more about your configuration so we can optimize the right things. - - - Error messages don't always exist where they'd be helpful. - Please let us know about any errors you ran into that would - have benefitted from a (more) descriptive message. - - KNOWN PROBLEMS IN THIS RELEASE: - - For a complete list of known problems, consult the SCons Issue Tracker - at tigris.org: - - http://scons.tigris.org/project_issues.html - - - Support for parallel builds (-j) does not work on WIN32 systems - prior to *official* Python release 2.2 (not 2.2 pre-releases). - - Prior to Python 2.2, there is a bug in Python's Win32 - implementation such that when a thread spawns an external command, - it blocks all threads from running. This breaks the SCons - multithreading architecture used to support -j builds. - - We have included a patch file, os_spawnv_fix.diff, that you can - use if you you want to fix your version of Python to support - parallel builds in SCons. - - - Again, the "SCons Design" documentation on the SCons web site is - out of date. Take what you read there with a grain of salt. - - - On Win32 systems, you must put a space between the redirection - characters < and >, and the specified files (or construction - variable expansions): - - command < $SOURCE > $TARGET - - If you don't supply a space (for example, "<$SOURCE"), SCons will - not recognize the redirection. - - - MSVC .res files are not rebuilt when icons change. - - - The -c option does not clean up .sconsign files or directories - created as part of the build, and also does not clean up - SideEffect files (for example, Visual Studio .pdb files). - - - When using multiple Repositories, changing the name of an include - file can cause an old version of the file to be used. - - - There is currently no way to force use of a relative path (../*) - for directories outside the top-level SConstruct file. - - - The Jar() Builder will, on its second or subsequent invocation, - package up the .sconsign files that SCons uses to track signatures. - You can work around this by using the SConsignFile() function - to collect all of the .sconsign information into a single file - outside of the directory being packaged by Jar(). - - - SCons does not currently have a way to detect that an intermediate - file has been corrupted from outside and should be rebuilt. - - - Unicode characters in path names do not work in all circumstances. - - - SCons does not currently automatically check out SConstruct or - SConscript files from SCCS, RCS or BitKeeper. - - - No support yet for the following planned command-line options: - - -d -e -l --list-actions --list-derived --list-where - -o --override -p -r -R -w --write-filenames - -W --warn-undefined-variables - - - -Thank you for your interest, and please let us know how we can help -improve SCons for your needs. - -Steven Knight -knight at baldmt dot com -http://www.baldmt.com/~knight/ - -With plenty of help from the SCons Development team: - Chad Austin - Charles Crain - Bill Deegan - Steve Leblanc - Greg Noel - Gary Oberbrunner - Anthony Roach - Greg Spencer - Christoph Wiedemann + Thanks to Greg Noel, Steven Knight, Dirk Baechle, William Deegan,and + W. Trevor King for their contributions to this release. +Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation +src/RELEASE.txt 5023 2010/06/14 22:05:46 scons |