From 140d836e9cd54fb67b969fd82ef7ed19ba574d40 Mon Sep 17 00:00:00 2001
From: Luca Falavigna <dktrkranz@debian.org>
Date: Sat, 26 Apr 2014 15:11:58 +0200
Subject: Imported Upstream version 2.3.1

---
 doc/editor_configs/serna/scons/dtd/soextblx.dtd | 321 ++++++++++++++++++++++++
 1 file changed, 321 insertions(+)
 create mode 100644 doc/editor_configs/serna/scons/dtd/soextblx.dtd

(limited to 'doc/editor_configs/serna/scons/dtd/soextblx.dtd')

diff --git a/doc/editor_configs/serna/scons/dtd/soextblx.dtd b/doc/editor_configs/serna/scons/dtd/soextblx.dtd
new file mode 100644
index 0000000..4a92e11
--- /dev/null
+++ b/doc/editor_configs/serna/scons/dtd/soextblx.dtd
@@ -0,0 +1,321 @@
+<!-- XML EXCHANGE TABLE MODEL DECLARATION MODULE -->
+
+<!-- This set of declarations defines the XML version of the Exchange
+     Table Model as of the date shown in the Formal Public Identifier
+     (FPI) for this entity.
+
+     This set of declarations may be referred to using a public external
+     entity declaration and reference as shown in the following three
+     lines:
+
+     <!ENTITY % calstblx
+       PUBLIC "-//OASIS//DTD XML Exchange Table Model 19990315//EN">
+       %calstblx;
+
+     If various parameter entities used within this set of declarations
+     are to be given non-default values, the appropriate declarations
+     should be given before calling in this package (i.e., before the
+     "%calstblx;" reference).
+-->
+
+<!-- The motivation for this XML version of the Exchange Table Model
+     is simply to create an XML version of the SGML Exchange Table
+     Model. By design, no effort has been made to "improve" the model.
+
+     This XML version incorporates the logical bare minimum changes
+     necessary to make the Exchange Table Model a valid XML DTD.
+
+     It has been modified slightly for use in the combined HTML/CALS models
+     supported by DocBook V4.3 and later.
+-->
+
+<!-- The XML version of the Exchange Table Model differs from
+     the SGML version in the following ways:
+
+     The following parameter entities have been removed:
+
+       - tbl.table.excep, tbl.hdft.excep, tbl.row.excep, tbl.entry.excep
+         There are no exceptions in XML. The following normative statement
+         is made in lieu of exceptions: the exchange table model explicitly
+         forbids a table from occurring within another table. If the
+         content model of an entry includes a table element, then this
+         cannot be enforced by the DTD, but it is a deviation from the
+         exchange table model to include a table within a table.
+
+       - tbl.hdft.name, tbl.hdft.mdl, tbl.hdft.excep, tbl.hdft.att
+         The motivation for these elements was to change the table
+         header/footer elements. Since XML does not allow element declarations
+         to contain name groups, and the exchange table model does not
+         allow a table to contain footers, the continued presence of these
+         attributes seems unnecessary.
+
+     The following parameter entity has been added:
+
+       - tbl.thead.att
+         This entity parameterizes the attributes on thead. It replaces
+         the tbl.hdft.att parameter entity.
+
+     Other miscellaneous changes:
+
+       - Tag ommission indicators have been removed
+       - Comments have been removed from declarations
+       - NUMBER attributes have been changed to NMTOKEN
+       - NUTOKEN attributes have been to changed to NMTOKEN
+       - Removed the grouping characters around the content model
+         parameter entry for the 'entry' element. This is necessary
+         so that an entry can contain #PCDATA and be defined as an
+         optional, repeatable OR group beginning with #PCDATA.
+-->
+
+<!-- This entity includes a set of element and attribute declarations
+     that partially defines the Exchange table model.  However, the model
+     is not well-defined without the accompanying natural language
+     description of the semantics (meanings) of these various elements,
+     attributes, and attribute values.  The semantic writeup, also available
+     from SGML Open, should be used in conjunction with this entity.
+-->
+
+<!-- In order to use the Exchange table model, various parameter entity
+     declarations are required.  A brief description is as follows:
+
+     ENTITY NAME      WHERE USED              WHAT IT IS
+
+     %yesorno         In ATTLIST of:          An attribute declared value
+                      almost all elements     for a "boolean" attribute
+
+     %paracon         In content model of:    The "text" (logical content)
+                      <entry>                 of the model group for <entry>
+
+     %titles          In content model of:    The "title" part of the model
+                      table element           group for the table element
+
+     %tbl.table.name  In declaration of:      The name of the "table"
+                      table element           element
+
+     %tbl.table-titles.mdl In content model of: The model group for the title
+                      table elements          part of the content model for
+                                              table element
+
+     %tbl.table.mdl   In content model of:    The model group for the content
+                      table elements          model for table element,
+                                              often (and by default) defined
+                                              in terms of %tbl.table-titles.mdl
+                                              and tgroup
+
+     %tbl.table.att   In ATTLIST of:          Additional attributes on the
+                      table element           table element
+
+     %bodyatt         In ATTLIST of:          Additional attributes on the
+                      table element           table element (for backward
+                                              compatibility with the SGML
+                                              model)
+
+     %tbl.tgroup.mdl  In content model of:    The model group for the content
+                      <tgroup>                model for <tgroup>
+
+     %tbl.tgroup.att  In ATTLIST of:          Additional attributes on the
+                      <tgroup>                <tgroup> element
+
+     %tbl.thead.att   In ATTLIST of:          Additional attributes on the
+                      <thead>                 <thead> element
+
+     %tbl.tbody.att   In ATTLIST of:          Additional attributes on the
+                      <tbody>                 <tbody> element
+
+     %tbl.colspec.att In ATTLIST of:          Additional attributes on the
+                      <colspec>               <colspec> element
+
+     %tbl.row.mdl     In content model of:    The model group for the content
+                      <row>                   model for <row>
+
+     %tbl.row.att     In ATTLIST of:          Additional attributes on the
+                      <row>                   <row> element
+
+     %tbl.entry.mdl   In content model of:    The model group for the content
+                      <entry>                 model for <entry>
+
+     %tbl.entry.att   In ATTLIST of:          Additional attributes on the
+                      <entry>                 <entry> element
+
+     This set of declarations will use the default definitions shown below
+     for any of these parameter entities that are not declared before this
+     set of declarations is referenced.
+-->
+
+<!-- These definitions are not directly related to the table model, but are
+     used in the default CALS table model and may be defined elsewhere (and
+     prior to the inclusion of this table module) in the referencing DTD. -->
+
+<!ENTITY % yesorno 'NMTOKEN'> <!-- no if zero(s), yes if any other value -->
+<!ENTITY % titles  'title?'>
+<!ENTITY % pcd "#PCDATA">
+<!ENTITY % paracon '%pcd;'> <!-- default for use in entry content -->
+
+<!--
+The parameter entities as defined below change and simplify the CALS table
+model as published (as part of the Example DTD) in MIL-HDBK-28001.  The
+resulting simplified DTD has support from the SGML Open vendors and is
+therefore more interoperable among different systems.
+
+These following declarations provide the Exchange default definitions
+for these entities.  However, these entities can be redefined (by giving
+the appropriate parameter entity declaration(s) prior to the reference
+to this Table Model declaration set entity) to fit the needs of the
+current application.
+
+Note, however, that changes may have significant effect on the ability to
+interchange table information.  These changes may manifest themselves
+in useability, presentation, and possible structure information degradation.
+-->
+
+<!ENTITY % tbl.table.name       "table">
+<!ENTITY % tbl.table-titles.mdl "%titles;,">
+<!ENTITY % tbl.table-main.mdl   "tgroup+">
+<!ENTITY % tbl.table.mdl        "%tbl.table-titles.mdl; %tbl.table-main.mdl;">
+<!ENTITY % tbl.table.att        "
+    pgwide      %yesorno;       #IMPLIED ">
+<!ENTITY % bodyatt              "">
+<!ENTITY % tbl.tgroup.mdl       "colspec*,thead?,tbody">
+<!ENTITY % tbl.tgroup.att       "">
+<!ENTITY % tbl.thead.att        "">
+<!ENTITY % tbl.tbody.att        "">
+<!ENTITY % tbl.colspec.att      "">
+<!ENTITY % tbl.row.mdl          "entry+">
+<!ENTITY % tbl.row.att          "">
+<!ENTITY % tbl.entry.mdl        "(%paracon;)*">
+<!ENTITY % tbl.entry.att        "">
+
+<!ENTITY % tbl.frame.attval     "top|bottom|topbot|all|sides|none">
+<!ENTITY % tbl.tbody.mdl        "row+">
+
+<!-- =====  Element and attribute declarations follow. =====  -->
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.table.name       "table"
+     ENTITY % tbl.table-titles.mdl "%titles;,"
+     ENTITY % tbl.table.mdl        "%tbl.table-titles; tgroup+"
+     ENTITY % tbl.table.att        "
+                        pgwide          %yesorno;       #IMPLIED "
+-->
+
+<!--doc:???-->
+<!ELEMENT %tbl.table.name; (%tbl.table.mdl;)>
+
+<!ATTLIST %tbl.table.name;
+        frame           (%tbl.frame.attval;)                    #IMPLIED
+        colsep          %yesorno;                               #IMPLIED
+        rowsep          %yesorno;                               #IMPLIED
+        %tbl.table.att;
+        %bodyatt;
+>
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.tgroup.mdl    "colspec*,thead?,tbody"
+     ENTITY % tbl.tgroup.att    ""
+-->
+
+<!--doc:A wrapper for the main content of a table, or part of a table.-->
+<!ELEMENT tgroup (%tbl.tgroup.mdl;) >
+
+<!ATTLIST tgroup
+        cols            NMTOKEN                                 #REQUIRED
+        colsep          %yesorno;                               #IMPLIED
+        rowsep          %yesorno;                               #IMPLIED
+        align           (left|right|center|justify|char)        #IMPLIED
+        %tbl.tgroup.att;
+>
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.colspec.att   ""
+-->
+
+<!--doc:Specifications for a column in a table.-->
+<!ELEMENT colspec EMPTY >
+
+<!ATTLIST colspec
+        colnum          NMTOKEN                                 #IMPLIED
+        colname         NMTOKEN                                 #IMPLIED
+        colwidth        CDATA                                   #IMPLIED
+        colsep          %yesorno;                               #IMPLIED
+        rowsep          %yesorno;                               #IMPLIED
+        align           (left|right|center|justify|char)        #IMPLIED
+        char            CDATA                                   #IMPLIED
+        charoff         NMTOKEN                                 #IMPLIED
+        %tbl.colspec.att;
+>
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.thead.att      ""
+-->
+
+<!--doc:A table header consisting of one or more rows.-->
+<!ELEMENT thead (row+)>
+
+<!ATTLIST thead
+        valign          (top|middle|bottom)                     #IMPLIED
+        %tbl.thead.att;
+>
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.tbody.att     ""
+-->
+
+<!--doc:A wrapper for the rows of a table or informal table.-->
+<!ELEMENT tbody (%tbl.tbody.mdl;)>
+
+<!ATTLIST tbody
+        valign          (top|middle|bottom)                     #IMPLIED
+        %tbl.tbody.att;
+>
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % tbl.row.mdl       "entry+"
+     ENTITY % tbl.row.att       ""
+-->
+
+<!--doc:A row in a table.-->
+<!ELEMENT row (%tbl.row.mdl;)>
+
+<!ATTLIST row
+        rowsep          %yesorno;                               #IMPLIED
+        valign          (top|middle|bottom)                     #IMPLIED
+        %tbl.row.att;
+>
+
+
+<!--
+     Default declarations previously defined in this entity and
+     referenced below include:
+     ENTITY % paracon           "#PCDATA"
+     ENTITY % tbl.entry.mdl     "(%paracon;)*"
+     ENTITY % tbl.entry.att     ""
+-->
+
+<!--doc:A cell in a table.-->
+<!ELEMENT entry (%tbl.entry.mdl;)*>
+
+<!ATTLIST entry
+        colname         NMTOKEN                                 #IMPLIED
+        namest          NMTOKEN                                 #IMPLIED
+        nameend         NMTOKEN                                 #IMPLIED
+        morerows        NMTOKEN                                 #IMPLIED
+        colsep          %yesorno;                               #IMPLIED
+        rowsep          %yesorno;                               #IMPLIED
+        align           (left|right|center|justify|char)        #IMPLIED
+        char            CDATA                                   #IMPLIED
+        charoff         NMTOKEN                                 #IMPLIED
+        valign          (top|middle|bottom)                     #IMPLIED
+        %tbl.entry.att;
+>
-- 
cgit v1.2.3