From 9b73d2781acfc322319eb5c59b30f2dfa0fea977 Mon Sep 17 00:00:00 2001 From: Luca Falavigna Date: Sat, 2 Jan 2010 20:31:23 +0100 Subject: Imported Upstream version 1.2.0.d20091224 --- engine/SCons/Script/Interactive.py | 386 +++++++++++++++++++++++++++++++++++++ 1 file changed, 386 insertions(+) create mode 100644 engine/SCons/Script/Interactive.py (limited to 'engine/SCons/Script/Interactive.py') diff --git a/engine/SCons/Script/Interactive.py b/engine/SCons/Script/Interactive.py new file mode 100644 index 0000000..8c27c87 --- /dev/null +++ b/engine/SCons/Script/Interactive.py @@ -0,0 +1,386 @@ +# +# Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The SCons Foundation +# +# Permission is hereby granted, free of charge, to any person obtaining +# a copy of this software and associated documentation files (the +# "Software"), to deal in the Software without restriction, including +# without limitation the rights to use, copy, modify, merge, publish, +# distribute, sublicense, and/or sell copies of the Software, and to +# permit persons to whom the Software is furnished to do so, subject to +# the following conditions: +# +# The above copyright notice and this permission notice shall be included +# in all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +# KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +# WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE +# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# + +__revision__ = "src/engine/SCons/Script/Interactive.py 4577 2009/12/27 19:43:56 scons" + +__doc__ = """ +SCons interactive mode +""" + +# TODO: +# +# This has the potential to grow into something with a really big life +# of its own, which might or might not be a good thing. Nevertheless, +# here are some enhancements that will probably be requested some day +# and are worth keeping in mind (assuming this takes off): +# +# - A command to re-read / re-load the SConscript files. This may +# involve allowing people to specify command-line options (e.g. -f, +# -I, --no-site-dir) that affect how the SConscript files are read. +# +# - Additional command-line options on the "build" command. +# +# Of the supported options that seemed to make sense (after a quick +# pass through the list), the ones that seemed likely enough to be +# used are listed in the man page and have explicit test scripts. +# +# These had code changed in Script/Main.py to support them, but didn't +# seem likely to be used regularly, so had no test scripts added: +# +# build --diskcheck=* +# build --implicit-cache=* +# build --implicit-deps-changed=* +# build --implicit-deps-unchanged=* +# +# These look like they should "just work" with no changes to the +# existing code, but like those above, look unlikely to be used and +# therefore had no test scripts added: +# +# build --random +# +# These I'm not sure about. They might be useful for individual +# "build" commands, and may even work, but they seem unlikely enough +# that we'll wait until they're requested before spending any time on +# writing test scripts for them, or investigating whether they work. +# +# build -q [??? is there a useful analog to the exit status?] +# build --duplicate= +# build --profile= +# build --max-drift= +# build --warn=* +# build --Y +# +# - Most of the SCons command-line options that the "build" command +# supports should be settable as default options that apply to all +# subsequent "build" commands. Maybe a "set {option}" command that +# maps to "SetOption('{option}')". +# +# - Need something in the 'help' command that prints the -h output. +# +# - A command to run the configure subsystem separately (must see how +# this interacts with the new automake model). +# +# - Command-line completion of target names; maybe even of SCons options? +# Completion is something that's supported by the Python cmd module, +# so this should be doable without too much trouble. +# + +import cmd +import copy +import os +import re +import shlex +import string +import sys + +try: + import readline +except ImportError: + pass + +class SConsInteractiveCmd(cmd.Cmd): + """\ + build [TARGETS] Build the specified TARGETS and their dependencies. + 'b' is a synonym. + clean [TARGETS] Clean (remove) the specified TARGETS and their + dependencies. 'c' is a synonym. + exit Exit SCons interactive mode. + help [COMMAND] Prints help for the specified COMMAND. 'h' and + '?' are synonyms. + shell [COMMANDLINE] Execute COMMANDLINE in a subshell. 'sh' and '!' + are synonyms. + version Prints SCons version information. + """ + + synonyms = { + 'b' : 'build', + 'c' : 'clean', + 'h' : 'help', + 'scons' : 'build', + 'sh' : 'shell', + } + + def __init__(self, **kw): + cmd.Cmd.__init__(self) + for key, val in kw.items(): + setattr(self, key, val) + + if sys.platform == 'win32': + self.shell_variable = 'COMSPEC' + else: + self.shell_variable = 'SHELL' + + def default(self, argv): + print "*** Unknown command: %s" % argv[0] + + def onecmd(self, line): + line = string.strip(line) + if not line: + print self.lastcmd + return self.emptyline() + self.lastcmd = line + if line[0] == '!': + line = 'shell ' + line[1:] + elif line[0] == '?': + line = 'help ' + line[1:] + if os.sep == '\\': + line = string.replace(line, '\\', '\\\\') + argv = shlex.split(line) + argv[0] = self.synonyms.get(argv[0], argv[0]) + if not argv[0]: + return self.default(line) + else: + try: + func = getattr(self, 'do_' + argv[0]) + except AttributeError: + return self.default(argv) + return func(argv) + + def do_build(self, argv): + """\ + build [TARGETS] Build the specified TARGETS and their + dependencies. 'b' is a synonym. + """ + import SCons.Node + import SCons.SConsign + import SCons.Script.Main + + options = copy.deepcopy(self.options) + + options, targets = self.parser.parse_args(argv[1:], values=options) + + SCons.Script.COMMAND_LINE_TARGETS = targets + + if targets: + SCons.Script.BUILD_TARGETS = targets + else: + # If the user didn't specify any targets on the command line, + # use the list of default targets. + SCons.Script.BUILD_TARGETS = SCons.Script._build_plus_default + + nodes = SCons.Script.Main._build_targets(self.fs, + options, + targets, + self.target_top) + + if not nodes: + return + + # Call each of the Node's alter_targets() methods, which may + # provide additional targets that ended up as part of the build + # (the canonical example being a VariantDir() when we're building + # from a source directory) and which we therefore need their + # state cleared, too. + x = [] + for n in nodes: + x.extend(n.alter_targets()[0]) + nodes.extend(x) + + # Clean up so that we can perform the next build correctly. + # + # We do this by walking over all the children of the targets, + # and clearing their state. + # + # We currently have to re-scan each node to find their + # children, because built nodes have already been partially + # cleared and don't remember their children. (In scons + # 0.96.1 and earlier, this wasn't the case, and we didn't + # have to re-scan the nodes.) + # + # Because we have to re-scan each node, we can't clear the + # nodes as we walk over them, because we may end up rescanning + # a cleared node as we scan a later node. Therefore, only + # store the list of nodes that need to be cleared as we walk + # the tree, and clear them in a separate pass. + # + # XXX: Someone more familiar with the inner workings of scons + # may be able to point out a more efficient way to do this. + + SCons.Script.Main.progress_display("scons: Clearing cached node information ...") + + seen_nodes = {} + + def get_unseen_children(node, parent, seen_nodes=seen_nodes): + def is_unseen(node, seen_nodes=seen_nodes): + return not seen_nodes.has_key(node) + return filter(is_unseen, node.children(scan=1)) + + def add_to_seen_nodes(node, parent, seen_nodes=seen_nodes): + seen_nodes[node] = 1 + + # If this file is in a VariantDir and has a + # corresponding source file in the source tree, remember the + # node in the source tree, too. This is needed in + # particular to clear cached implicit dependencies on the + # source file, since the scanner will scan it if the + # VariantDir was created with duplicate=0. + try: + rfile_method = node.rfile + except AttributeError: + return + else: + rfile = rfile_method() + if rfile != node: + seen_nodes[rfile] = 1 + + for node in nodes: + walker = SCons.Node.Walker(node, + kids_func=get_unseen_children, + eval_func=add_to_seen_nodes) + n = walker.next() + while n: + n = walker.next() + + for node in seen_nodes.keys(): + # Call node.clear() to clear most of the state + node.clear() + # node.clear() doesn't reset node.state, so call + # node.set_state() to reset it manually + node.set_state(SCons.Node.no_state) + node.implicit = None + + # Debug: Uncomment to verify that all Taskmaster reference + # counts have been reset to zero. + #if node.ref_count != 0: + # from SCons.Debug import Trace + # Trace('node %s, ref_count %s !!!\n' % (node, node.ref_count)) + + SCons.SConsign.Reset() + SCons.Script.Main.progress_display("scons: done clearing node information.") + + def do_clean(self, argv): + """\ + clean [TARGETS] Clean (remove) the specified TARGETS + and their dependencies. 'c' is a synonym. + """ + return self.do_build(['build', '--clean'] + argv[1:]) + + def do_EOF(self, argv): + print + self.do_exit(argv) + + def _do_one_help(self, arg): + try: + # If help_() exists, then call it. + func = getattr(self, 'help_' + arg) + except AttributeError: + try: + func = getattr(self, 'do_' + arg) + except AttributeError: + doc = None + else: + doc = self._doc_to_help(func) + if doc: + sys.stdout.write(doc + '\n') + sys.stdout.flush() + else: + doc = self.strip_initial_spaces(func()) + if doc: + sys.stdout.write(doc + '\n') + sys.stdout.flush() + + def _doc_to_help(self, obj): + doc = obj.__doc__ + if doc is None: + return '' + return self._strip_initial_spaces(doc) + + def _strip_initial_spaces(self, s): + #lines = s.split('\n') + lines = string.split(s, '\n') + spaces = re.match(' *', lines[0]).group(0) + #def strip_spaces(l): + # if l.startswith(spaces): + # l = l[len(spaces):] + # return l + #return '\n'.join([ strip_spaces(l) for l in lines ]) + def strip_spaces(l, spaces=spaces): + if l[:len(spaces)] == spaces: + l = l[len(spaces):] + return l + lines = map(strip_spaces, lines) + return string.join(lines, '\n') + + def do_exit(self, argv): + """\ + exit Exit SCons interactive mode. + """ + sys.exit(0) + + def do_help(self, argv): + """\ + help [COMMAND] Prints help for the specified COMMAND. 'h' + and '?' are synonyms. + """ + if argv[1:]: + for arg in argv[1:]: + if self._do_one_help(arg): + break + else: + # If bare 'help' is called, print this class's doc + # string (if it has one). + doc = self._doc_to_help(self.__class__) + if doc: + sys.stdout.write(doc + '\n') + sys.stdout.flush() + + def do_shell(self, argv): + """\ + shell [COMMANDLINE] Execute COMMANDLINE in a subshell. 'sh' and + '!' are synonyms. + """ + import subprocess + argv = argv[1:] + if not argv: + argv = os.environ[self.shell_variable] + try: + # Per "[Python-Dev] subprocess insufficiently platform-independent?" + # http://mail.python.org/pipermail/python-dev/2008-August/081979.html "+ + # Doing the right thing with an argument list currently + # requires different shell= values on Windows and Linux. + p = subprocess.Popen(argv, shell=(sys.platform=='win32')) + except EnvironmentError, e: + sys.stderr.write('scons: %s: %s\n' % (argv[0], e.strerror)) + else: + p.wait() + + def do_version(self, argv): + """\ + version Prints SCons version information. + """ + sys.stdout.write(self.parser.version + '\n') + +def interact(fs, parser, options, targets, target_top): + c = SConsInteractiveCmd(prompt = 'scons>>> ', + fs = fs, + parser = parser, + options = options, + targets = targets, + target_top = target_top) + c.cmdloop() + +# Local Variables: +# tab-width:4 +# indent-tabs-mode:nil +# End: +# vim: set expandtab tabstop=4 shiftwidth=4: -- cgit v1.2.3