Description: Correct manpage spelling errors Author: Jörg Frings-Fürst Last-Update: 2019-07-23 --- This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ Index: trunk/scons.1 =================================================================== --- trunk.orig/scons.1 +++ trunk/scons.1 @@ -457,7 +457,7 @@ call should use or generate the results .PP \-\-config=auto .RS 4 -scons will use its normal dependency mechanisms to decide if a test must be rebuilt or not\&. This saves time by not running the same configuration tests every time you invoke scons, but will overlook changes in system header files or external commands (such as compilers) if you don\*(Aqt specify those dependecies explicitly\&. This is the default behavior\&. +scons will use its normal dependency mechanisms to decide if a test must be rebuilt or not\&. This saves time by not running the same configuration tests every time you invoke scons, but will overlook changes in system header files or external commands (such as compilers) if you don\*(Aqt specify those dependencies explicitly\&. This is the default behavior\&. .RE .PP \-\-config=force @@ -1572,7 +1572,7 @@ The tool definition (i\&.e\&. my_tool()) .PP If no tool list is specified, then SCons will auto\-detect the installed tools using the PATH variable in the ENV construction variable and the platform name when the Environment is constructed\&. Changing the PATH variable after the Environment is constructed will not cause the tools to be redetected\&. .PP -One feature now present within Scons is the ability to have nested tools\&. Tools which can be located within a subdirectory in the toolpath\&. With a nested tool name the dot represents a directory seperator +One feature now present within Scons is the ability to have nested tools\&. Tools which can be located within a subdirectory in the toolpath\&. With a nested tool name the dot represents a directory separator .sp .if n \{\ .RS 4 @@ -6544,7 +6544,7 @@ env\&.Substfile(\*(Aqfoo\&.in\*(Aq, SUBS good_foo = [(\*(Aq$foobar\*(Aq, \*(Aq$foobar\*(Aq), (\*(Aq$foo\*(Aq, \*(Aq$foo\*(Aq)] env\&.Substfile(\*(Aqfoo\&.in\*(Aq, SUBST_DICT = good_foo) -# UNPREDICTABLE \- one substitution could be futher expanded +# UNPREDICTABLE \- one substitution could be further expanded bad_bar = {\*(Aq@bar@\*(Aq: \*(Aq@soap@\*(Aq, \*(Aq@soap@\*(Aq: \*(Aqlye\*(Aq} env\&.Substfile(\*(Aqbar\&.in\*(Aq, SUBST_DICT = bad_bar) @@ -6693,7 +6693,7 @@ files will be automatically created (i\& \fB$LINGUAS_FILE\fR and \fB$POTDOMAIN\fR -are taken into acount too\&. All other construction variables used by +are taken into account too\&. All other construction variables used by \fBPOTUpdate\fR, and \fBPOUpdate\fR work here too\&. @@ -6776,7 +6776,7 @@ file\&. Note, that the updated POT and PO -files are usually going to be committed back to the repository, so they must be updated within the source directory (and not in variant directories)\&. Additionaly, the file listing of +files are usually going to be committed back to the repository, so they must be updated within the source directory (and not in variant directories)\&. Additionally, the file listing of po/ directory contains LINGUAS @@ -7348,7 +7348,7 @@ Example: AllowSubstExceptions() # Also allow a string containing a zero\-division expansion -# like \*(Aq${1 / 0}\*(Aq to evalute to \*(Aq\*(Aq\&. +# like \*(Aq${1 / 0}\*(Aq to evaluate to \*(Aq\*(Aq\&. AllowSubstExceptions(IndexError, NameError, ZeroDivisionError) .fi .if n \{\ @@ -9342,7 +9342,7 @@ Return([vars\&.\&.\&., stop=]) .RS 4 By default, this stops processing the current SConscript file and returns to the calling SConscript file the values of the variables named in the \fIvars\fR -string arguments\&. Multiple strings contaning variable names may be passed to +string arguments\&. Multiple strings containing variable names may be passed to \fBReturn\fR\&. Any strings that contain white space .sp The optional @@ -10117,7 +10117,7 @@ function to create a copy of your source \fIvariant_dir\fR is not found but exists under \fIsrc_dir\fR, the file or directory is copied to -\fIvariant_dir\fR\&. Target files can be built in a different directory than the original sources by simply refering to the sources (and targets) within the variant tree\&. +\fIvariant_dir\fR\&. Target files can be built in a different directory than the original sources by simply referring to the sources (and targets) within the variant tree\&. .sp \fBVariantDir\fR @@ -11411,7 +11411,7 @@ is used to create PDF output from an XML .PP DOCBOOK_FOPFLAGS .RS 4 -Additonal command\-line flags for the PDF renderer +Additional command\-line flags for the PDF renderer fop or xep\&. @@ -11438,7 +11438,7 @@ is used to resolve XIncludes for a given .PP DOCBOOK_XMLLINTFLAGS .RS 4 -Additonal command\-line flags for the external executable +Additional command\-line flags for the external executable xmllint\&. .RE .PP @@ -11469,7 +11469,7 @@ is used to transform an XML file via a g .PP DOCBOOK_XSLTPROCFLAGS .RS 4 -Additonal command\-line flags for the external executable +Additional command\-line flags for the external executable xsltproc (or saxon, @@ -11478,7 +11478,7 @@ xalan)\&. .PP DOCBOOK_XSLTPROCPARAMS .RS 4 -Additonal parameters that are not intended for the XSLT processor executable, but the XSL processing itself\&. By default, they get appended at the end of the command line for +Additional parameters that are not intended for the XSLT processor executable, but the XSL processing itself\&. By default, they get appended at the end of the command line for saxon and saxon\-xslt, respectively\&. @@ -14142,7 +14142,7 @@ A list of installed versions of the Metr .PP NAME .RS 4 -Specfies the name of the project to package\&. +Specifies the name of the project to package\&. .RE .PP no_import_lib @@ -15924,7 +15924,7 @@ The suffix used for tar file names\&. TEMPFILEARGJOIN .RS 4 The string (or character) to be used to join the arguments passed to TEMPFILE when command line exceeds the limit set by -\fB$MAXLINELENGTH\fR\&. The default value is a space\&. However for MSVC, MSLINK the default is a line seperator characters as defined by os\&.linesep\&. Note this value is used literally and not expanded by the subst logic\&. +\fB$MAXLINELENGTH\fR\&. The default value is a space\&. However for MSVC, MSLINK the default is a line separator characters as defined by os\&.linesep\&. Note this value is used literally and not expanded by the subst logic\&. .RE .PP TEMPFILEPREFIX @@ -16276,7 +16276,7 @@ file\&. .PP X_RPM_EXTRADEFS .RS 4 -A list used to supply extra defintions or flags to be added to the RPM +A list used to supply extra definitions or flags to be added to the RPM \&.spec file\&. Each item is added as\-is with a carriage return appended\&. This is useful if some specific RPM feature not otherwise anticipated by SCons needs to be turned on or off\&. Note if this variable is omitted, SCons will by default supply the value \*(Aq%global debug_package %{nil}\*(Aq @@ -16500,7 +16500,7 @@ builder\&. .PP _XGETTEXTFROMFLAGS .RS 4 -Internal "macro"\&. Genrates list of +Internal "macro"\&. Generates list of \-D flags from the \fB$XGETTEXTPATH\fR @@ -18442,7 +18442,7 @@ a = Action("build < ${SOURCE\&.file} > $ .PP \fIexitstatfunc\fR -specifies a function that is passed the exit status (or return value) from the specified action and can return an arbitrary or modified value\&. This can be used, for example, to specify that an Action object\*(Aqs return value should be ignored under special conditions and SCons should, therefore, consider that the action always suceeds: +specifies a function that is passed the exit status (or return value) from the specified action and can return an arbitrary or modified value\&. This can be used, for example, to specify that an Action object\*(Aqs return value should be ignored under special conditions and SCons should, therefore, consider that the action always succeeds: .sp .if n \{\ .RS 4