diff options
Diffstat (limited to 'xsane.CHANGES~')
| -rw-r--r-- | xsane.CHANGES~ | 2962 |
1 files changed, 2962 insertions, 0 deletions
diff --git a/xsane.CHANGES~ b/xsane.CHANGES~ new file mode 100644 index 0000000..cf0e645 --- /dev/null +++ b/xsane.CHANGES~ @@ -0,0 +1,2962 @@ +CHANGES FOR FRONTEND XSANE FOR SANE: +------------------------------------ + +xsane-0.11 beta and before: +--------------------------- + + - based on gtk-1.0.x + - histogram + - online color enhancement + - gamma table: tested with + - 8, 10 and 12 input bits per color + - 8 output bits per color + - standard and advanced options in own (non scrollable) window + - photocopy function via postscript output (gray + color, not lineart) + - frontend/Makefile.in changed for xsane + + +xsane-0.11 -> 0.12: +------------------- + + - added ps, jpeg and png(1+8bit) output format, selected by filename + - added lineart support for ps + - changed configure.in and config.h.in and included them into xsane + - changed device selection dialog: scanner vendor and model added + - added xsane-logo (winner from gimp-contest) to device-selection and about-window, + it is loaded from SANE_DATA_PATH/sane/xsane-logo.xpm (/usr/local/share/sane/...) + - histogram window now always exists and may be hidden + - changed handling of devicename given as commandline option: + sane_get_devices is called and the vendor, model and type get identified, + if the given device name does not fit to the beginning of an existing device name + the device selection is opened + + +xsane-0.12 -> 0.13: +------------------- + + - file format detection now works with case insensetive + - changed font for device selection + - changed output format of device list for selection + - disabled gamma table for 1 bit grayscale (lineart) + - improved error handling of saving routines + - removed ram eater in preview routine + - added default gamma upload into preview scan routine + - added tiff-output-format + - changed lineart to grayscale conversion in saving-routines + - added test if selected output format is supported before scan + + + +xsane-0.13 -> 0.14: +------------------- + + - added info window that displays hidden options/values + - xsane compiles without sane-source-package now, + sane must be installed. + - if scan is started with save for unsupported graphics format + an error message comes up before scanning is started + - tested for param.depth>1 for gamma correction + - added test for sane major version number, abort if mismatch + + +xsane-0.14 -> 0.15: +------------------- + + - if device is given as commandline option it is now loaded again + if it is not in the devicelist + - moved some functions in xsane.c out of a #ifdef HAVE_LIBGIMP .. #endif-block + - added sliders in the gray/red/green/blue-levels for black/gray/white points + - gamma correction in preview is now only done if depth > 1 + - enhancement sliders are not shown in lineart mode any more + + +xsane-0.15 -> 0.16: +------------------- + + - moved save-routines to xsane-save, named xsane* to xsane-* + - included progress-routines into xsane.c + - moved xsane.h to xsane-text.h + - moved definitions and external used function headers to xsane.h + - added test for depth > 1 before calculating preview histogram + - added test for preview_gamma_data_red before calculating preview histogram + - added test for preview_gamma_data_red before doing preview gamma correction + - added p->image_data_raw = malloc(3*p->image_width*p->image_height); + in xsane-preview.c/scan_start + - added authorization_callback routine + - renamed a lot of routines * -> xsane_* + - added p->previous_selection.active = FALSE; draw_selection(p); + to preview_gamma_correction to redraw selection + - added preview_update(p); to scan_done in xsane-preview.c to reactivate selection + - added header for saving >8bpp raw data (SANE_GRAYSCALE_RAW, SANE_RGB_RAW) + - added 16 bit saving routines for pnm(ascii), png and raw + - added 16 bit routines to xsane_read_image_data, added 16 bit gamma software support + + +xsane-0.16 -> 0.17: +------------------- + + - xsane-gtk.c moved free(elem->menu); elem->menu = 0; in panel_destroy out of + the for-loop + - added some #ifdefs #endifs around saving routines for TIFF, PNG and JPEG + - added BIT_DEPTH as well known option, preview sets this value to 8 if it is greater than 8 + - added range checks in calculation for auto enhancement values + - calculation of auto enhancement values is not called in lineart mode any more + + +xsane-0.17 -> 0.18: +------------------- + + - added quit_xsane in xsane_choose_dialog_ok_callback if no device was opened + - added sane_get_parameters(..) in xsane_scan_dialog + - added xsane_increase_counter_in_filename to xsane-save.[ch] + - Filename counter is automatically increased after scan + - Changed setup_dialog callbacks, cancel does work now + - zoomfactor is calculated now if copy mode is selected + - added tooltips for xsane setup options + - changed "destroy"-event of authorization dialog to "delete_event" + - in gsg_message made the ok button default + - added gsg_decision routine + - added overwrite warning + - postscript images are saved in original size in scan mode now + + +xsane-0.18 -> 0.19: +------------------- + + - added cancel callback routine for conversion/saving routines + - printer_resolution now is set if OK is pressed in setup + - overwrite warning is not shown in copy mode any more + - changed fclose to pclose for closing pipe to printer command + - restored xsane.resolution in xsane_pref_device_restore + - added Help menu, called Netscape -remote to open help-files + - set sensetivity of xsane dialog and histogram dialog while + scan and preview scan to false + - added some help(html) files to the doc directory + + +xsane-0.19 -> 0.20: +------------------- + + - improved online help + - added own version number for xsane, there are three version + numbers now: + - xsane version + - sane version + - package version (e.g if there is a package of different frontends) + - added gamma value (gray, red, green, blue) for printer (copy mode) + - changed sane-style.rc -> xsane.style.rc + - changed PATH_SANE_DATA_DIR -> old PATH_SANE_DATA_DIR/sane + - preview gamma correction is done by the xsane gamma correction instead of + the Xserver gamma correction, there are also values for red, green and blue + now. + - spilt setup window into notebook pages + - replaced in xsane_pref_set_unit_callback preview_update by preview_area_resize, + the ruler units are updated now if unit is changed + - made menue length unit inactive if length unit is pixel + - added dialogs for batch scan list and fax page list, but not finished and disabled + - changed local includes from <...> to "..." + - test for filetype is only done in scanmode now + - added list of (up to 10) printers for photocopy mode + - added error messages if failed to open files + - added sigpipe_handler for handling broken pipe while writing to printercommand + + +xsane-0.20 -> 0.21: +------------------- + + - in xsane-preview.c if backend does not use scanareaselection dev_selection[i] + is set to width/height of image + - replaced most sprintf by snprintf + - made menue length unit inactive if scanare is nut supported by the backend + - set maximum value in 16 bit saving routines to 16 bit/65535 + - 1 bit/pixel png file is saved with 1 bit/pixel instead of 8 bit/pixel now + - added support for gtk-1.2 + - font are set in xsane-style.rc now + + +xsane-0.21 -> 0.22: +------------------- + + - split xsane.c in: + - xsane.c + - xsane-setup.c + - xsane-gamma.c + - xsane-front-gtk.c + - xsane-scan.c + - renamed xsane-gtk.c to xsane-back-gtk.c + - removed libtool from package + - added experimental fax support + +xsane-0.22 -> 0.23: +------------------- + + - changed configure.in, removed some unnecessary parts + and added error messages if gtk or sane is not installed + + - removed copy-mode resolution bug (was not changed if zoom slider was moved) + - removed bug in faxmode if faxproject did not exist (fclose(0)) + - changed definition of struct xsane and struct xsane_setup + - added documentation-viewer-command to setup, netscaperemote is selected + via the keyword "netscape-remote" + +xsane-0.23 -> 0.24: +------------------- + + - removed some bugs in gamma value calculation for real scan (preview was ok) + - added activation for some windows after scan error + - removed bugs in startup if no device is available or selected, + the xsane.rc-file keeps untouched now + + +xsane-0.24 -> 0.25: +------------------- + + - moved xsane_pixmap_new as xsane_create_histogram from xsane-front-gtk.c to + xsane-gamma.c + - now putting the histogram sliders directly into the slider preview instead + of drawing into the preview window, the sliders are not erased by other + other windows now + - added block_update_param flag, the update_param and update_histogram routines + are now called only one time if the preview scan area is changed + - added changing of one edge in preview scanarea (left mousebotton near the edge) + - added moving of preview scanarea (middle or right mousebutton) + - moved creation of histogram dialog to xsane-gamma.c + - removed some bugs in the preview, resizing the preview window should work now + - added an experimental zoom for the preview + + +xsane-0.25 -> 0.26: +------------------- + + - removed some preview_update calls or replaced them by preview_update_selection + - renamed preview_update to preview_update_surface and made surface_changed a parameter + - ruler scaling is now ok in resized windows and zoomed previews + - added some range checks in preview_calculate_histogram + - parts in the preview window that are not part of the scan area are painted gray now + - added image_surface to preview structure, it stands for the surface of the scanned preview image + - renamed preview_get_image_scale to preview_get_scale_preview_to_image + - added routine preview_get_scale_device_to_preview + - added Zoom 20% out routine + - the selected area can be larger than the viewable preview now + - added Pipette functions (pick black, gray and white) - mouse pointer does change to pipetty icon + - p->aspect is calculated by image-size now if the surface is not defined (INF) in + preview_update_surface + - preview_update_surface is called now after preview scan and preview_restore_image + - moved the "Help" menu in the main dialog to the right + + +xsane-0.26 -> 0.27: +------------------- + + - added scantips and index of backends to help menu + - changed configure.in, libpng should be found on (all ?) systems now + - black and white point sliders use the two additional pixels now + - user can preset (reduce) the preview area now + - added "Select visible area" button + - removed some bugs in gray gamma value calculation for real scan (preview was ok) + - setup of faxoptions: normal, fine and postscript option is saved now + + +xsane-0.27 -> 0.28: +------------------- + + - added option negative into enhancement and changed create_gamma + draw_histogram and auto_enhancement to work with it! + + - increased contrast range from -100..+100 to -100..+200 + and brightness range from -100..+100 to -200..+200 + because the old values were not sufficent for scanning negatives + + - added selection for number of copies in copy mode + + +xsane-0.28 -> 0.29: +------------------- + + - removed bug in xsane_set_resolution that could cause a segmentation fault + - added support for resolution of type CONSTRAINT_WORD_LIST + - xsane-mode (scan, copy, fax) can be selected as command line option (-s, -c, -f) now + - most texts that are defined in xsane are defined in xsane-text now + + +xsane-0.29 -> 0.30: +------------------- + + - removed bug in xsane_set_resolution, now highest resolution can be set if + resolution is a list! + - added RGBI support - must be activated in xsane.h (SUPPORT_RGBI) + - added options rgb default and negative to preferences + - enhancement values are saved with device settings now + - The filename can be specified now for the file in which the device settings are saved + or from which they are loaded. + - changed extension from ".rc" to ".drc" (device rc) + - added header "XSANE_DEVICE_RC" to identify it as device-rc-file + - added calculation for color components to auto enhancement + - pipette functions: middle mouse button defines shadow/gray/highlight + for color components, left mouse button only defines gray values! + - auto enhancement values are set to standard values in + xsane_calculate_histogram if no values could be calculated + - histogram is cleared when sensitivity is set to false + - improved calculation of auto enhancement values + - increased contrast range from -100..+200 to -100..+300 (gray) and + -300..+300 (color) and brightness range from -200..+200 to -300..+300 + + +xsane-0.30 -> 0.31: +------------------- + + - changed filename character transformation: erase " ", "_" -> "__", "/" -> "_" + - device settings standard file name is vendor:model + so it does not matter any more if the sg-device name has changed + - the xsane main window can be a fixed or a scrolled, resizable window now. + selection is done with setup/display/"main window fixed", + the main window mode can be overwritten by specifying a command + line option: + -R or --Resizeable activates the resizeable, scrolled window, + -F or --Fixed activates the fixed (non resizable) window (default) + - histogram is cleared when info dialog or about dialog is opened + - changed version option from -V to -v + - added support for Automatic Document Feeder (scan until error) + this is experimentary because in the SANE-standard there is + no way defined how a frontend can identify an ADF. + The backend has to load the next document automatically! + - in xsane_enhancement_update replaced gtk_signal_emit_by_name + by gtk_signal_emit + - moved more texts to xsane-text.h + - changed all RGBI -> RGBA because the 4th channel is ALPHA + I think that SANE_FRAME_RGBA will be added to the sane standard + - gtk+-1.2.0 is minimum requirement: removed tests for + gtk_tooltips_set_tips, gtk_scrolled_window_add_with_viewport + and gtk_events_pending that were needed for gtk+-1.0.x + - added option "--device-settings file" to define default + filename for device-settings + - corrected "legal" size in preview + - added device_text to info and preview window title + - moved color definition to xsane_creat_histogram_dialog + - pixmap colors depend on histogram_dialog now because + the histogram dialog is the first dialog that exists + - renamed all gtk functions like defined in gtkcompat.h + (gtk+-1.0.x -> gtk+-1.2.x) + - removed bug in device selection, device can be selected + now with keyboard + - xsane info window prints gamma depth "none" in 1 bit modes + + +xsane-0.31 -> 0.32: +------------------- + + - added option --no-mode-selection/-s to disable menu for + xsane mode selection + - prepared text outputs (in xsane-text.h) for NLS/gettext support + - multiple \n in scanf while reading saved preview image removed + - added AM_PROG_CC_STDC to configure.in for HP/UX + - added a break statement after each default in switch block + - changed test for multiple image scan, when sane_read returned with + SANE_STATUS_GOOD when the image is finished we start a new scan, + SANE_STATUS_EOF is expected when scanning should be stopped. + This way the Automatic Document Feeder is supported a way + like planned in the sane standard, the backend says + if the frontend shall call sane_start repeatadly. + + +xsane-0.32 -> 0.33: +------------------- + + - removed change about SANE_STATUS_GOOD in multiple image mode. + Adf mode is detected by scanmode again. This would be better + selected by a mulit_image bit in the preferences block. + - added common rotuine xsane_set_sensitivity to xsane-front-gtk.c + - renamed xsane_test_adf to xsane_test_multi_scan + + +xsane-0.33 -> 0.34: +------------------- + + - the preview selection is based on device coordinates instead of + preview window coordinates now + - added preview buttons and preview viewport to xsane_set_sensitivity + - info and about dialog use xsane_set_sensitivity now + - dummy_filename is created and opened for writing AFTER sane_start is called. + - sane_start() == NO_DOCS is not handled as error any more + - xsane_scan_done -> sane_cancel is called now if an error occurs + - if an error occurs while scanning the created file is removed + - xsane windows/buttons get inactive while setup dialog is open + - xsane_scan_done -> sane_cancel is called when main window is closed + (while scanning) + - if there are no standard device settings at program startup, xsane + take the backend predefined resolution (before this was set to 100) + - if no scanarea options are given, the preview works with + [0,INF] instead of [-INF,INF] now + - transformed all gif files in directory doc to jpeg format because of + all the trouble about the gif licence. Will never use gif again! + + +xsane-0.34 -> 0.35: +------------------- + + - corrected doc/Makefile.in for change gif->jpg + - added tiff compression type selection for multi bit and one bit images to + setup: + none, CCITT 1D Huffman compression, CCITT Group 3 Fax compression, + CCITT Group 4 Fax compression, Lempel-Ziv & Welch, JPEG DCT compression, + pack bits + - implemented real single-bit format for tiff + - setup/jpeg quality selection is enabled if jpeglib or libtiff is available + - added gimp_image_set_resolution(...) to gimp saving routine + - added test for libgimp/gimpfeatures.h to configure.in and config.h.in + - disabled sensetivity while filename browse window is open + - added handling if fileselection window was closed + - moved filename "Browse" button from the right to to the left with disk-image inside + - (added image filetype menu to the image filename line - not ready) + - replaced button-texts negative, rgb default, auto, default, store and + restore by icons + + +xsane-0.35 -> 0.36: +------------------- + + - moved xsane_generate_dummy_filename in xsane-scan.c out of a + #ifdef HAVE_LIBGIMP_H block + - changed some icons + - added #ifdef HAVE_LIBTIFF around TIFF-relevant definitions in + xsane_setup_dialog in xsane-setup.c + - included NLS/gettext version 0.10.35 + - texts that are created by xsane can be converted to other languages + now - texts created by the backend can not be translated yet! + - added gettext relevant routines to aclocal.m4 and correct some bugs + - added french translation - thanks to Vincent Renardias <vincent@ldsol.com> + - added german translation table + - translation files "*.po" are created by "*.po.in" with help of the + preprocessor of gcc, all texts are #defined in frontend/xsane-text.h + + +xsane-0.36 -> 0.37: +------------------- + + - added some texts to xsane-text.h and newlanguage.po.in[.in], + created file add-0.37.po.in where the new entries are listed + - moved generation of xsane.backend (backendname like umax) + from xsane_help_build_menu to xsane_device_dialog, needed for + translation of backend options + - added translation for backend options: + Backend translation is done with translation table sane-BACKENDNAME.mo + - removed bug in preview_update_selection() + (forgotten p->selection.active = TRUE) + The selection box is updated correct now + - removed bug in aclocal.m4: not fount "-lintl" when gettext is in glibc + + +xsane-0.37 -> 0.38: +------------------- + + - changed STANDALONE -> XSANE_STANDALONE and + GIMP_EXTENSION -> XSANE_GIMP_EXTENSION because GIMP_EXTENSION + now (gimp-1.1.10) is used in the Gimp + - changed brightness and contrast range maximum form 300 to 400 % + - moved gimp installation texts to xsane-text.h + added entries to po/newlamguage* + - xsane -g now does not print anything and does not abort if gimp + support is compiled in + - changed lib/Makefile.in and sanei/Makefile in, make install should + work without a previous make now + - xsane gimp-plugin is selected via file/acquire now when + gimp-version >= 1.1.9 + - . removed ../intl/libintl.a form frontend/Makefile.in and + . added CATOBJEXT=UNKNOWN and XGETTEXT=":" in if "gettext is in libc" + to aclocal.m4 + hope this solves problems with missing "-lintl" now on all systems + - moved "show xxx" menu items form menu "Preferences" to menu "View" + - added continuous update to histogram sliders and preview selection + - added preferences menu item "Update policy" + - now options are only changable if SANE_CAP_SOFT_SELECT is set + - added test for bitdepth in xsane_scan_dialog for GIMP mode, + error message pops up when unsupported bit depths are selected + - moved case XSANE_PNM16 out of a #ifdef HAVE_LIBPNG block + - position of all windows and size of main window and preview window + is save in device settings, setting preview window geometry + does not work because window does not exist at relevant times. + + +xsane-0.38 -> 0.39: +------------------- + + - bounded contrast to >=-100.0 + - Added test if GIMP_CHECK_VERSION is defined + + +xsane-0.39 -> 0.40: +------------------- + + - device name is saved in drc file now + - xsane version is saved in drc file now + - warning is printed if device rc file was not created for active device + - removed member device from struct preferences - was never used + - changed frontend/Makefile.in (XSCAN->BINPROGS) + - changed configure.in: + - changed order of some checks + - added status messages at the end + - added "--enable-intl-patch" which adds -lintl to check for libsane + - added "--disable-gimp" + - added "--disable-jpeg" + - added "--disable-tiff" + - added "--disable-png" + - moved xsane_generate_dummy_filename and fopen() into if XSANE_STANDALONE block, + there is no empty file created in gimp mode any more. + + +xsane-0.40 -> 0.41: +------------------- + + - renamed xsane-incons.h -> xsane-icons.c and xsane-icons-def.h -> xsane-icons.h + - moved all includes that are needed by most xsane sources to xsane.h + problem with missing stdio.h is solved that way + - changed configure script: + - check for sane is moved to the end because of missing libintl, + - check for png is done with x_includes and x_libraries, + and libpng is added to lib after all checks are done + + +xsane-0.41 -> 0.42: +------------------- + + - changed configure.in, error message about missing sane is also printed if sane.h + is not found. + - changed info row (size box, start button): the start button is made smaller when + the info box needs more place + - changed calculateion of size in info row from unisgned long to float + because unsigned long / 10 were to small to fit A4 with 1200x1200 dpi + - changed png part of configure, HAVE_LIBPNG is now defined again + - corrected png lineart saving + + +xsane-0.42 -> 0.43: +------------------- + + - disabled LZW-compression for TIFF. + Unisys holds a patent for LZW compression. I am not sure + about the licence status of LZW and TIFF. GIF is not supported + because of the licence problem. LZW for TIFF is disabled now. + - removed all LZW entries in sourcecode and translation tables + + +xsane-0.43 -> 0.44: +------------------- + + - renamed NOTEBOOK_PRINTER_OPTIONS to NOTEBOOK_COPY_OPTIONS + - added sane-problems-doc.html to the help menu + - added functions around "by ext" menu + - all functions in xsane-back-gtk.c are named with xsane_back_gtk_* now + + +xsane-0.44 -> 0.45: +------------------- + + - added *s = 0; in sanei_codec_ascii.c when reading a string that + does not start with '"' + + - added test "if (!w.status)" when reading a string in sanei_load_values.c + the missing test caused a segfault when a string was expected but + the line did not start with '"' + + - merged together all needed sanei_* routines in xsane-rc-io.c + and renamed all sanei_* to xsane_rc_io_*, removed subdir sanei + and changed xsane.c and xsane-preferences.c to use xsane-rc-io.[ch] + and reprogrammed some things. + + - renamed all xsane_pref_device_* to xsane_device_preferences_* + and moved them to xsane-device-preferences.c + + - renamed sanei_w_[load|save]_values to xsane_device_preferencs_[load|save]_values + and moved them to xsane-device-preferences.c + + +xsane-0.45 -> 0.46: +------------------- + + - changed xsane_rc_io_w_space: returns ENODATA instead of EINVAL at EOF + + - added xsane_rc_io_w_skip_newline + + - changed xsane_device_preferences_load_values: + - begin at start of file is only inciated if w.status == ENODATA + - if w.status is an other error, the line is skipped + + - moved and renamed w_string, w_int, w_double from xsane-preferences.c + to xsane_rc_pref_* in xsane-rc-io.c + + - repleaced fprintf/fscanf for reading xsane device preferences by + xsane_rc_io_w_* routines + This way the floating point values (xsane- gamma, brightness and contrast) + are saved different and the *.drc-files are incompatible in that point. + + - added test for lineart mode (depth == 1) in xsane_enhancement_update + solves segmentation fault problem when device settings with lineart enabled + are loaded + + +xsane-0.46 -> 0.47: +------------------- + + - if helpfile viewer is netscape-remote and netscape is not running + it is started + + - replaced ENODATA (used for EOF detection in xsane-rc-io and + xsane-device-preferences) by XSANE_EOF (=-1) + (ENODATA is not defined on all systems) + + - If faxproject does not exist, project data entries are made insensitive + and buttons "send project" and "delete project" are replaced by "create project" + + - Added missing "&" in xsane_device_preferences_save_values: + xsane_rc_io_w_array(w, &len, (void **) &word_array, (WireCodecFunc) xsane_rc_io_w_word, sizeof(SANE_Word)); + that cause segmentation fault when writing bool, int or fixpoint arrays. + + +xsane-0.47 -> 0.48: +------------------- + + - "START" button is made insensitive in fax mode if project does not exist. + + - Preview window is created at the same time as the main dialog and it is destroyed + at program end. Disabling "show preview" hides the preview window. This way the preview + window placement does work correct. + + - set default values in xsane_device_preferences_load_file(char *filename) + before reading the saved values, show_preview default = true + + - Mouse pointers display relevant mode icons in preview window now. + + - In copy mode the maximum selectable size that fits to the selected printer is drawn + by a rect now. Selection is limited to the printer size. + + - if no local xsane.rc, xsane-style.rc or DEVICE.drc file exists it is loaded from SANE_DATA_DIR/xsane + + - all xsane rc files are placed in a subdirectory xsane now (~/.sane/xsane, SANE_DATA/DIR/xsane) + + - temporary files (previews, conversions) are saved in /tmp (defined in SANE_PATH_TMP in xsane.h) now + + - added window decoration icon (top left) to each xsane window (does work with kwm, does not work with fvwm2) + + - added warning icon and error icon + + - removed xsane_files_exit_callback, now xsane_scan_win_delete is used for all exit program calls + + - conversion-* and preview-* files are created with permission "-rw-------", + images- and project-files are created with "preferences.image_umask" + xsane.rc and *.drc are created with XSANE_DEFAULT_UMASK defined in xsane.h + + - added file permission selection in preferences/saving options for image file and for directory (faxproject) + + - disabled fileoptions (mkdir, rm, mv) in loading/saving preferences + + +xsane-0.48 -> 0.49: +------------------- + + - added support for different x/y resolutions and zoom factors, + the y-resolution slider is added to the xsane main dialog now + + - in gimp mode x- and y-resolution infos are set correct now + + - added resolution and zoom icons for x- and y-dimension + + - added fax_width and fax_height to preferences + + - added paper size frame in fax mode preview + + - added czech translation - thanks to by Stanislav Brabec <utx@k332.feld.cvut.cz> + + - changed gimp_install_procedure(...): "RGB, GRAY" -> 0 + + - changed printer geometry setup from 1/72 ich to mm + + - added setup entries for fax- width, height, left_offset and bottom_offset + + - corrected terminating \0 of strings in sane_choose_device + + - when button "Negative" is pressed the white/gray/black points + are also inverted + + - split preview_restore_image into preview_restore_image and + preview_restore_image_from_file, it can zoom into a saved + image now. + + - zoom functions are done now without a new preview scan. + 3 different zoom levels are stored. + + - in xsane_scan_start the output file is only opend once in multi pass scan + three pass scan does work now again. + + - added several missing routines for gamma correction in three pass scan + + +xsane-0.49 -> 0.50: +------------------- + + - removed bug in calculation of paper size in copy and fax mode + + - added support for rotate image in xsane_save_ps + + - added support for rotate (landscape mode) in copy mode and save-ps mode + and added preferences menu "Rotate Postscript" + + - added bugfix for gtk_tooltips_set_colors as long as it does not work in gtk + + - improved memory allocation routines and error handling in preview + + - after the main window is created the resolution, resolution_x amd resolution_y + are made up to date now + + - changed dynamic menue list definition in xsane_setup for TIFF_COMPRESSION menu + + +xsane-0.50 -> 0.51: +------------------- + + - added some rangechecks to histogram->gamma calculation + it is done as histogram->gamma->histogram now + + - changed redraw frame in preview_display_partial_image(), + now the old image is completely overpainted! + + - added xsane_set_all_resolutions() to xsane_printer_callback, + now paper size frame is updated when printer is changed + + - corrected wrong error message in setting of scansource_selection + from "unknown type" to "unknown constraint type" + + - moved xsane.header_size = 0; to the end of xsane_scan_done so it is called in each case + the missing command was responsible for a segfault when starting a scan after xsane_cancel + has been called + + - moved progress_bar from it's own window to the bottom of the main window + progress_bar texts are displayed in info frame and in progress bar + + - added size in mm/cm/in to progress bar when not scanning + + - in scales the number of digits is defined by quantization now, if no quantization is given + by backend (quant=0, SANE_TYPE_FIXED) x.2 digits are displayed + + - corrected page_step for scales + + - selection_active is reset in preview_display_partial_image instead of preview_paint_image + + - updated czech translation file cs.po.in - thanks to Stansislav Brabec + + +xsane-0.51 -> 0.52: +------------------- + + - changed gimp_install_procedure(...) for specified device: "RGB, GRAY" -> 0 + + - in xsane-scan.c and xsane-preview.c added " | GDK_INPUT_EXCEPTION" to + gdk_input_add(fd, GDK_INPUT_READ | GDK_INPUT_EXCEPTION, preview_read_image_data, p); + + - added static int xsane_set_modus_defaults(void) + zoomfactor is set to 1.0 if copy mode is selected + full preview area is selected if copy or fax mode is selected + + - removed a second xsane_device_preferences_restore(); in static void xsane_device_dialog(void) + + - zoom factor keeps unchanged when printer is changed + + - added psfile-geometry to setup/saving options, it is used when saving postscript in scanmode + + - moved exisiting routines to open functions to xsane-front-gtk.c: + void xsane_define_output_filename(void); + void xsane_identify_output_format(char **ext); + + - define_maximum_output_size is called in each routine that changes filename or fileextension + because the output frame is also drawn in scanmode with filetype postscript now + + - included Stanislav Brabec's <utx@penguin.cz> sed-scripts and changes for Makefile.in in xsane-*/po + + - added creation of newlanguage.po in po/Makefile.in + + - updated german translation file de.po + + - updated czech translation file cs.po - thanks to Stanislav Brabec <utx@k332.feld.cvut.cz> + + - updated french translation file fr.po + + +xsane-0.52 -> 0.53: +------------------- + + - added test if vendor, model and type strings do exists (pointer != 0) + otherwise "no vendor",... is printed + + - changed + ext = &extension; + to + if (extension) + { + *ext = strdup(extension); + } + else + { + *ext = 0; + } + in xsane_identify_output_format - bad thing, I get old ;-) + + - added new routine xsane_find_best_resolution that makes sure that the selected resolution + fits into range/quantization given by backend. + This is used by xsane_set_resolution and when resolution_list is created. + + - added xsane_set_all_resolutions to xsane_set_modus_defaults + + - xsane resolution can be changed by backend now + + +xsane-0.53 -> 0.54: +------------------- + + - updated french translation table + + - updated german translation table + + - changed type of umask in preferences from mode_t to int because + sizeof(mode_t) is on some machines only 2 bytes what cause problems. + all calls of umask(foo) are changed to umask((mode_t) foo) + + - changed preferences update_policy from GtkUpdateType to int. + + - selection box can not be moved out of the preview window, the + size of the selection keeps unchanged in that case now. + + - removed some gtk_main_iteration and reordered some selection drawing routines. + + - removed unused files/directories from package: + sanei, include/sane/sanei_(some).h, po_old + + +xsane-0.54 -> 0.55: +------------------- + + - added preview support for 16 bpp (transformed to 8bpp) + + - added copyright line in devcie selection dialog + + - preview selection frame is only active when backend supports coordinate selection + + - added preview oversampling factor (multiplier for calculated preview resolution) + + - added lineart enhancement: preview can be done in grayscale now, + threshold value change is displayed without a new preview scan. + + - added "device options" to setup dialog: + - Scanner dependant options for grayscale->lineart conversion have + to be entered there. + + - a color preview is now displayed gray when grayscale mode is selected + + - updated de.po, cs.po, fr.po + + - updated po/xsane-pot.sed + + +xsane-0.55 -> 0.56: +------------------- + + - added hold timer to preview (update-policy=delayed) + + - added hold timer to xsane_slider (update-policy=delayed) + + - moved help menu from file to help + + - added swedish (sv) translation - thanks to Johan Bengtsson <johanb@lls.se> + + - removed bug in xsane_rc_io_w_string, it returns EINVAL now each time when the string + does not begin with " + + +xsane-0.56 -> 0.57: +------------------- + + - made xsane_choose_device return type to void (was gint32) + + - arranged device-preferences in struct xsane in the order they are used + as device preferences, made sure that all variable types are correct: + - changed type of xsane.mode from gint32 to int + - changed type of xsane.lineart_mode from gint32 to int + - changed type of xsane.show_preview from SANE_Bool to int + - changed type of xsane.enhancement_rgb_default from SANE_Bool to int + - changed type of xsane.fax_finemode from SANE_Bool to int + + - added mask for *_lock in preview motion_notify_event handling + Preview selection can be done with locks activated now + + - histogram is cleared before/redrawn after saving/loading device settings + + - added xsane_control_option() that tests if option >= 0 and returns SANE_STATUS_INVAL if not + + - added xsane_get_option_descriptor() that tests if option >= 0 and returns NULL if not + + - changed parameters of preview_area_resize and added preview_area_resize_handler + + - removed a lot of gtk_main_iterations from xsane_preview.c + they make problems in the redrawing order and can cause display problems + + +xsane-0.57 -> 0.58: +------------------- + + - split the preview_event_handler into + - preview_press_button_event_handler + - preview_motion_event_handler + - preview_release_button_event_handler + + - the preview_expose_event_handler now is called twice, + the second call has been placed in the preview_event_handler_before + + - reactivated gtk_main_iteration after at the end of motion_event + + - added warning window when xsane is started as root + + - added selection of temporary directory in preferences/setup/saving options + + - added gdk_input_remove(xsane.input_tag); before xsane_start_scan is called + in 3-pass scanning mode (suggestion from Heiko_Schroeder@t-online.de) + + - changed output of "xsane -v" + + - in xsane_scan_done moved xsane.header_size = 0; before test for ADF + Thanks to Russell Coggrave for the info about it. + + - added gtk_set_locale() before gtk_init() + + - added copyright sign "(c)" to translated texts because it is not available on all charsets + + - temporary filenames are created random and unique (mktemp + random number) + due to security problems with fixed/calculateable tempfiles. + + - the preview-files are created (empty) at program startup now + + - when program exits the previews are erased + there is no way to store the preview images any more when the program is closed + + - preview_restore_image() creates the xsane-startimage if no preview is stored + + - renamed directory frontend to src + + - create xsane-help script that opens online helpfile + + +xsane-0.58 -> 0.59: +------------------- + + - preview_do_gamma_correction does test for 3 pass scanner color mode + + - changed fax x-resolution and standard resolution from 98 ppi to 204 ppi + and with of faxpage from 210.0 to 215.7 (so we get 1728 pixels in x direction, + hxlafax-faq says that is the correct size) + + - split preferences.printer[..].resolution -> lineart, grayscale and color_resolution + + - added setlocale(LC_NUMERIC, "C"); in xsane_init() and #include <locale.h> in xsane.h + this should solve the problems with empty images (100%transparent) with gimp + and other problems that were caused by local settings (1.3 <=> 1,3). + + - added setup-option "disable gimp preview gamma" + + - added selection (preferences/setup/enhancement options) if autoenhancement changes gamma value + + - renamed Preferences/Setup/"Device options" to "Enhancement options" + + - removed xsane internal callbacks from dialog struct, the functions are called directly now + + - changed the reading of the preview image header. The last newline character before the image + data starts again made some problems, this seems to depend on the data that follows. So I added + a fgets() command to skip the newline character - this seems to work. + + - changed increase_filename_in_counter, does work now if the only character of the base-filename + is the counter + + - reduced size of src/xsane-startimage.pnm (1MB => 0.6MB) + + +xsane-0.59 -> 0.60: +------------------- + + - after filename counter is increased the cursor in the outputfilename entry is moved to the right + + - in preview_read_image_data when image is complete: + preview_update_surface(p, 0); + is called before + preview_display_image(p); + this way the geometry of the first preview scan is correct. + + - moved xsane_set_all_resolutions in xsane_update_xsane_callback(), + it now also is called when the backend only uses one reesolution + + - added calibration image (xsane-calibration.pnm) that is loaded when setup window is created. + The xsane enhancement functions are disabled in calibration mode, the image can not be + resized (xscale = yscale = 1.0). + The previsous image is reloaded when the setup window is closed again. + + - enviornment variable SANE_DEFAULT_DEVICE is used to activate the radiobutton in the + device selection menu + + - removed unused item "custom" from preview surface menu + + - changed preview surface menu items: + A3 -> A3P (portrait) + A4 -> A4P (portrait) + A4H -> A4L (landscape) + A5 -> A5P (portrait) + A5H -> A5L (landscape) + + - removed script xsane-help, necessary command now is listed in xsane.PROBLEMS + + +xsane-0.60 -> 0.61: +------------------- + + - added debug output function and messages (environment variable XSANE_DEBUG) + + - moved all global variables and struct GSGdialog to global struct xsane + + - cleaned up some variable names + + - added free gamma curve dialog (not ready) + + - prepared xsane for win32: + - when BUGGY_GDK_INPUT_EXCEPTION is defined only blocking mode is used + (needed because GDK input exception does not work on win32) + - on win32 you cannot get a homedirectory, for this + XSANE_FIXED_HOME_PATH has to be set to the path that shall be + used as homedirectory + - replaced all gtk_dialog_new by gtk_window_new and added hbox and vbox to the window + (gtk_dialog_new does not work on WIN32) + - added xsane.WIN32 and xsane.WIN32-compilation that describes how xsane + is build on WIN32 with CYGWIN + - replaced "/" in all paths, added label SLASH that is predefined to '/' if it is + not defined by compiler option. For WIN32 it is set to '\' by compiler option + - all fopen functions use argument "rb" or "wb" now (b=binary). This is needed for WIN32 + and the b is ignored on unix systems. + - published binary version xsane-win32-0v01 and xsane-win32-0v02 based on + xsane-pre0.61 versions + + - removed an ugly bug: in struct Preferences there was predefined a string ("/tmp/") + that caused a bad memory state when the string memory was freed, + instead the string is defined in xsane_pref_restore now + + - changes for tiff format: + - added support for 16 bit tiff format. + - predefined tiff-compression is changed from 5 to PACKBITS(16bit), JPEG(8bit), FAXG3(1bit). + - add resoultion-tags and datetime-tag to tiff files. + + - added "change directory" entry to preferences menu + + - added "scanning for devices" dialog + + +xsane-0.61 -> 0.62: +------------------- + + - updated manpage (was about 1 year old) + + - removed sigprocmask.c from xsane-*/lib (not used) + + - added icons (32x32 and 48x48) for unix(xpm) and Windows(ico) + + - some additional changes for rotating preview + + - removed bug in preview_get_color that caused segfault when + click with pipette was placed into preview area but outside the image, + ( there was no test for image size ) + + - in info dialog tiff is now listed as supported 16 bit format + + - filename counter is increased now if path or filename includes a "." + and fileytpe is seleced by menu + + - added possibility to move the edge of the preview selection frame + thanks to Laurent Martelli for his suggestion for that + + - added sane_get_parameters(xsane.dev, &xsane.param) at end of preview_scan_done + this way it is made sure that xsane.param is correct after preview scan + (was not correct in copy mode with lineart=grayscale->lineart preview) + + - added explaination of "[DEVICE]" in xsane help message + + - gimp handling now is always called in xsane_scan_done + (was not called when an error occured or the cancel button was pressed). + + - moved selection of fax finemode to fax-project window, image is always scanned + in fine mode resolution. + + - html-documentation is updated (a bit) + + - removed bad "+ 0.5" from calculation in preview_set_option_float: word = SANE_FIX(value) + 0.5; + + - included italian translation table (it.po), thanks to Mauro Colorio <macolori@tin.it> + + - added error message in xsane_control_option if command failed + + - p->startimage is set to 0 in preview_scan_start + + +xsane-0.62 -> 0.63: +------------------- + + - added turkish translation (thanks to Togan Muftuoglu <toganm@turk.net>) + + - changed gimp interface from 1.0 to 1.1.2x (GParam->GimpParam etc), + added xsane-oldgimp.h that adds #defines for the old gimp interface + + - added "make uninstall" + + - changed confiure.in, added test for x_includes before it is used, + renamed it to configure.old + + - new configure.in file that does use "sane-config" now to find the sane libraries + + +xsane-0.63 -> 0.64: +------------------- + + - changed xsane-oldgimp.h to work with gimp-1.0.4 + + - added info icon (green triangle with explanation mark) + + - added info window function: xsane_back_gtk_info + + - ADF mode: if first scan fails with NO_DOCS => error message: no docs + if another scan ends with NO_DOCS => info message: scanned pages: # + + - added some accelerator keys. The key definitions may change any time, + this is a first test version. The key-definitions are listed in xsane.ACCELKEYS + + - added grab_default for close buttton in info and about dialog + + - changed test for sane-libs in aclocal.m4, "-lintl" is removed from + the output of "sane-config --libs" + (this caused segfaults when gettext is included in libc) + + - added about translation dialog + + - added options "-p", "--print-filenames", if enabled and xsane runs in scanmode it + prints names of produced image files to stdout + + - added options "-N name", "--force-filename name", if set the user filename selection + is disabled and the given name is used as filename. The filename should be of the + form "basename-00001.filetype". The size of the counter has to be suffisunt large. + + - some changes in configure script (missing libs needed by sane are not linked any more) + + +xsane-0.64 -> 0.65: +------------------- + + - src/Makefile.in: added usage of SANE_CFLAGS and GTK_CFLAGS + + - added secure password transmission for authorisation (md5digest) + + - ~/.sane/pass is used for reading user:password:resource from file before asking the user + + - configure: removed test for X (AC_PATH_X), this is done in GTK (gtk-config) + gtk includes and libs are used for png test (because png often is in X directories) + + - changed xsane_*_with_pixmap: + old status: routines used xsane.histogram_dialog->window as window for gdk_pixmap_create_from_xpm_d() + this made problems with preview window if X default color depth differd from X color depth + new status: routines are called with parameter GdkWindow *window now. + + +xsane-0.65 -> 0.66: +------------------- + + - added setup menu for Automatic Document Feeder Scansource + (ADF-Scansource name was predefined to "Automatic Document Feeder" before, + now it can be defined for each device (is saved in decice settings)) + + - changed setup for lineart->grayscale scanmode from entry to menu with available scanmodes + + - updated xsane.WIN32-compilation and src/Makefile.in.WIN32 + I compiled a pre version of xsane-0.66 with the cygwin snapshot from 2000-12-10 and + gtk+-dev-20001023.zip, glib-dev-20001023.zip, libiconv-dev-20001007.zip + with the way described in xsane.WIN32-compilation without any problems. + The problem with the fork() seems to be solved in this cygwin version. + + - updated aclocal.m4 and configure (gimp test) + + +xsane-0.66 -> 0.67: +------------------- + + - added test if (xsane.adf_scansource) before usage of xsane.adf_scansource + (caused segfault when no ADF Scanmode was defined in setup) + + +xsane-0.67 -> 0.68: +------------------- + + - changed src/Makefile.in.WIN32 so that the installation directory can + be selected by configure --prefix=... and the used paths are more + common to the one on unix (/usr/local => c:\sane) + + - changed src/Makefile.in.WIN32 for gimp support (uncomment GIMP_LIBS) + + - WIN32+gimp-support: set_gimp_PLUG_IN_INFO_PTR(&PLUG_IN_INFO) is called + + - added extern GimpPlugIn PLUG_IN_INFO to xsane.h (needed in xsane.c for win32) + + - replaced free(xsane.tile) by g_free(xsane.tile) + (the free(...) caused a crash on win32) + + - changed aclocal.m4: gimp test does work with gimp-1.0.x version again + + - renamed xsane.WIN32 and xsane.WIN32-compilation to xsane-WIN32.txt + and xsane-WIN32-compilation.txt (it is easer to use on windows) + + - removed (#ifndef _WIN32) gtk_set_locale() from xsane.c for win32 + (when it was called gimp plugin created transparent images) + + - saved xsane-style.rc in DOS mode (\n\r) + + +xsane-0.68 -> 0.69: +------------------- + + - some changes in aclocal.m4 for gimp test: + - When gimp-config is not found, the output of gtk-config is used + - GTK_CFLAGS or GIMP_CFLAGS are added to CPPFLAGS for test for gimp.h and gimpfeatures.h + - GTK_CFLAGS and GTK_LIBS are erased when gimp_config is available + + - changed src/Makefile.in: GIMP_CFLAGS is used now + + - saved xsane-style.rc in unix mode (\n) because DOS mode (\n\r) made problems + + - added new way to call netscape remote command: + at first xsane tries to find out if netscape is running, for this it tries to + find out if there is a link "~/.netscape/lock". If this link exists netscape should + be running and xsane calls "netscape -remote openFile(...)". Otherwise xsane calls + "netscape ..." + + - changed keywork "netscape-remote" as docviewer to "netscape" + + - changed way to find out home directory in xsane-back-gtk.c: + now getenv(ENVIRONMENT_HOME_DIR_NAME) is used instead of getpwuid(...)->pw_dir. + (getenv is usable for Win32 and unix, getpwuid makes problems on Win32) + + + +xsane-0.69 -> 0.70: +------------------- + + - removed some bugs in text for pipette in sane-xsane-preview-doc.html + + - changed acloacal.m4: when gimp-config is not found we look for gimptool + + - for WIN32 the filetypes listed in the filetype menu are ".jpg" and ".tif" + instead of ".jpeg" and ".tiff" + + - added manufacturer image to bottom of standard and advanced options window. + The name of the image is "vendor"-logo.xpm" or "sane-"backend"-logo.xpm", + the size of the image should be 256x48 pixels with a transparent background. + + - changed src/Makfile.in: *-logo.xpm are installed (make install) and + uninstalled (make uninstall) now + + - changed src/Makfile.in.WIN32: *-logo.xpm are installed (make install)now + + - several changes in xsane-preview.c for rotating preview by 0/90/180/270 degree + the preview rotation is ready now + + - added new routine xsane_save_rotate_image to xsane-save.c + + - added new routine xsane_save_grayscale_image_as_lineart to xsane-save.c + + - lineart images are saved in grayscale mode at first if transformation has to be done + + - xsane_save_rotate_image is called beween scanning and saving image + + - xsane_save_grayscale_image_as_lineart is called beween rotating and saving image + + - aclocal.m4/configure: changed sane_major_version etc to SANE_CURRENT_MAJOR + + - fileheader of raw format changed. This format is not defined, but some programs + can read it as 16 bit pnm binary data, so we use a compatible header now: + P5 + # This file is in a not public defined data format. + # It is a 16 bit gray binary format. + # Some programs can read this as pnm/pgm format. + # SANE data follows. + 100 100 + 65535 + + + +xsane-0.70 -> 0.71: +------------------- + + - corrected aspect ratio in xsane-preview.c in routine that calculates preview resolution + + - corrected user definition of maximum scanner surface + + - added translation of preview menu maximum surface(preset area) + + - added tooltip for maximum surface(preset area) menu and rotation menu + + - finished preview_autoselect_scanarea() + + - added autoselect scanarea button to preview window + + - changed automaitic increase of filename counter: + - the step direction and length is not forced to +1, + the user can select one of the values -2/-1/0/+1/+2. + It is defined by preferences.filename_counter_step. + This way it is possible to scan double sided papers + with correct automatic page number generation. + - the digits are not increased by a loop any more, + the number is read, the new number is calculated + and the new filename is generated. The user can + select a minimum filename counter length now, + it is defined in preferences.filename_counter_len + and can be selected by the user in setup/saving options + - when the number of digits are not enough the number is + automatically increased now. + - a message comes up when counter gets smaller than 0 + + - pipette the color is averaged on a square, the size of the + square can be defined by the user + + - updated html doc (not complete) + + - added tooltips to permission buttons (r,w,x) + permission texts: user, group, all, read, write, execute can be translated now. + + - added japanese translation (thanks to Kimizuka Tomokazu <sgtom@pluto.dti.ne.jp>) + + - renamed oldgimp.h to gimp-1_0-compat.h + + +xsane-0.71 -> 0.72: +------------------- + + - changed default postscript viewer from xv to gv + + - moved int i, select = 1; in static void xsane_saving_notebook() out of #ifdef HAVE_LIBTIFF block + + - filename counter length correction is only done in sane_start when there is a user selectable filename + + - if external filename is given the counter len is not touched when not necessary + + - added "insert file" function to fax mode + + - added output of gamma, brightness and contrast settings to pnm headers + + - updated xsane online-documentation (html) + + - added license dialog, it is shown when it was not already accepted for this xsane version + (tested in local xsane.rc) + + - about and about translation dialogs do not set XSane´s sensitivity to false any more + + - copyright sign is now always defined as "(c)", can be translated with \251 if character is available + + - device preferences are not saved/loaded any more when file selection is aborted + + - in xsane_info_dialog the scanner type is translated now + + - added accelerator keys to device selection dialog: + Escape -> Cancel + F1,F2,.. -> select device number 1,2,... + + - added usleep(100ms) in device selection dialog before scanning for devices, this way we make + sure that the text "scanning for devices" is displayed + + - added some accelarator keys to the preview window: + Alt ESC Cancel Preview Scan + Alt KP+ Zoom in + Alt KP- Zoom out + Alt KP* Zoom not + Alt KP/ Zoom undo + Alt A Autoselect scanarea + Alt V Select visible scanarea + + - added accelerator key Escape to file-selection-dialog, about-dialog and about-translation-dialog + attached to cancel/close button + + - updated translations: + - german translation + - czech translation - thanks to Stanislav Brabec <utx@penguin.cz> + - turkish translation - thanks to Togan Muftuoglo <toganm@yahoo.com> + - japanese translation - thanks to Kimizuka Tomokazu <sgtom@pluto.dti.ne.jp> + - french translation - thanks to Laurent Grawet <laurent.grawet@ibelgique.com> + + +xsane-0.72 -> 0.73: +------------------- + + - moved call to display license after test for command line options, + so it is not necessary to accept the license to print help/version/license + + - added slowenian translation, thanks to Ales Kosir <ales.kosir@zaslon.com> + + - an error message is printed when a preview file could not be created + + - netscape is called with option new-window now + + - rotating scanned image uses memory mapped image file if possible + thanks to Salvador Pinto Abreu <spa@di.uevora.pt> for his suggestions + + - xsane windows are set insensitive while faxproject is generated/queued. + For this waitpid is called in a loop. + + - before a html documentation is displayed xsane does test if the requetsted file + does exist in the subdirectory language_dir = gettext("language_dir") + (what e.g. gives "de" for german). If it does exist it is displayed, otherwise + the original english doc is displayed. + "language_dir" has to be part of the translation table, it should be + translated to the correct translation direcotry name, e.g. de for german + + - preferences.printer momory is defined dynamicall now (has been defined to 10 + pointers to printerdefinition before) + + - chaged with of some setup fields - have been too small for large fonts + + - xsane-scan:xsane_scan_dialog(): + added test for color scan to the test if gamma tables for red, green and blue + exists (coolscan backend defines color gamma tables in grayscale mode + what caused segfault in xsane). + + - added preselect scanarea after preview scan (selection in enhancment setup) + + - added automatic color correction after preview scan (selection in enhancement setup) + + - removed bug (that caused segfault when opening setup dialog) in xsane_enhance_notebook + while setting up menu itmes for grayscale scanmode selection: + replaced xsane.well_known.scanSOURCE xsane.well_known.scanMODE + + - added option in prefences/setup saving options: save device preferences at exit + + - now using always gdk_window_get_root_origin() to get a position of a window on desktop + + +xsane-0.73 -> 0.74: +------------------- + + - transfering data to gimp plugin now is handled like saving to a special file format. + this way it is possibe to support handheld scanners and to get advance of + some xsane features like image rotation. + + - corrected mmap() part in xsane-save.c/rotation: + data is mmaped with offset pos0, the offset pos0 is removed from pointer calculation + + - changed xsane_enhancement_by_histogram() and xsane_histogram_to_gamma(): the ranges + for gamma, brightness and contrast are checked correct now + + - added function preview_transform_coordinate_window_to_image(), it is used in + preview_get_color(). Pipette functions do work with rotated preview now. + + - corrected bug in ruler calculation. The rulers do work correct now with rotated preview + + - corrected bug in reading 16 bit preview data: sizeof(buf16)-> sizeof(buf) + now preview transformation from 16 to 8 bit is as fast as 8 bit preview + + - preset areas are defined with position (new) and size (old) now. + + - surface changes (size and rotation) do not change the selected preview area + any more if possible + + +xsane-0.74 -> 0.75: +------------------- + + - xsane_read_image_data() does reduce 16 bit images to 8 bit when necessary/requested + + - when scanning with 16 bits/color in gimp mode, to jpeg-file or postscript-file + xsane does ask if the image should be reduced to 8 bits/color + + - added functions for mirroring preview and mirroring while rotating scan + + - moved saving device preferences from xsane_quit() to xsane_scan_win_delete() + and replaced call to xsane_quit() by xsane_exit() in choose_device dialog + (this could cause a segfault). + + - corrected a bug in calculation of histogram for rotation of 270 degree + + - added xsane_bound_int(&mid, min, max) to xsane_calculate_auto_enhancement() + a segfault could occur when autoenhancement was activated when only a few + preview-pixels where available for calculation of autoenhancement values + + +xsane-0.75 -> 0.76: +------------------- + + - rotoation routine: mmap does map the full image file (not only from pos0) + + - added xsane.depth, it stores the depth of the scanned image, + it may differ from xsane.param.depth when lineart is converted to grayscale + or 16 bit image is reduced to 8 bit + + - preview: preset_area list is read from xsane.rc + + - added context menu to preview preset_area menu, the preset areas can + be changed by user now + + - transformation 16->8 bits/color: replaced val/256 by val >> 8, + a user said that his compiler is too stupid for such an optimization + + - updated translations: cs, de, fr, ja, sv + + - calibration image is not rotated any more + + - corrected exposure event handling (drawing of the selection frame) + + - added call of preview_restore_image() at the beginning of preview_update_surface(). + This way the correct image parameters are used for the calculation in + preview_update_surface(). preview_restore_image() does not paint the image any + more, this is done at the end of preview_update_surface() now. + + - corrected bug in xsane_calculate_histogram() with zoomed and rotated preview + with angels 90 and 270 degree. + + - info dialog does print sane version as #.#.# (instead of #.#) again. + sane-dll will return the version of the sane package from sane-1.0.5 + so it is possible to find out the used library version in most cases. + + - xsane-scan.c: scan data is not written with fwrite() in 1 byte steps + any more because it looks like some systems (at least HP 9000/B1000 + (processor PA8500/300 MHz, 384 MB RAM) operating system HP-UX 10.20) + have problems with this. The data is stored in the read buffer when + any transformation (gamma, 16->8 bit) is needed, the complete + buffer that is read with sane_read is written in one part. + + - added xsane.spec - created by Sebastian Wenzler <wenzler@techie.com> + + - autoselection of scanarea is not done for startimage + + - preview image files (level 0-2) are removed and recreated when + the temporary directory is changed in the saving setup + (Preview scan has to be reacquried after changing the temporary directory) + + - directory selection dialogs (change working directory and select temporary directory) + do not display filelist and delete-file widgets. + + - xsane-preview.c and xsane-gamma.c: + - raw preview data is stored with 16 bits/color + - gamma correction is done with (8-16) bit to 8 bit enhanced data + the gamma input bits is set to 12 (but could be changed if we + add a widget that can change this value) + 12 bit = 4096 values for each gamma table, this is a good + compromise between image quality, speed and memory usage + - All this slows down gamma and histogram routines, because of this + I accelerated these routines again: + - replaced field indexes by optimized pointer routines + - preview_motion_event_handler improved: continuous mode does use + a timer function now. this way the selection has a higher priority + than displaying the histograms. + - the raw histogram is only recalculated and displayed when it has been changed. + + - improved event handling of the histogram sliders: + when continuous mode is active xsane_enhancement_by_histogram() is not called + directly any more, it is called via the xsane_slider_hold_event handler now + + - split setup notebook "saving options" into "saving options" and "image options" + + - added option "reduce 16 bit image to 8 bit" to setup/image options + This way you can use the preview with the full bit depth the scanner + can output and save it as image with 8 bits/color. + This is interesting e.g. when you scan slides or negatives. + + - changed ouput in parameter box from "width x height (size unit)" to + "witdh x height x depth (size unit)" + + - filetype menu is displayed correct now when xsane main window is rebuild + + - removed a bug in aclocal.m4 wehn gimp was not found + + +xsane-0.76 -> 0.77: +------------------- + + - removed "+0.5" in calculation of gamma table. A gamma value of 1.000 does + not change the image data any more + + - xsane_update_gamma_curve(TRUE /* update raw */); is called when setup dialog is closed + (apply and cancel), now the preview is displayed with correct gamma values when setup + dialog is closed. + + - configure does set gtk parameters correct when compiling gimp testprogram failed + + - xsane internal gamma tables for scanning are created after sane_start is called, + this makes sure that the gamma table size calculated with param.depth really is correct + + - setup uses selected length unit + + - length unit is printed in top left edge between rulers in preview window + + - when length unit is saved as inch the length unit submenu "in" now is selected at program start + + - removed xsane.spec because I got a mail that it does not produce working installations + + - length unit also can be selected now when backend length unit is pixel, so it + is possible to change the length unit of the setup window + + - save device preferneces dialog is opened when user closes setup dialog and any + device options have been changed + + - replaced all fprintf(stderr, ... by DBG(... + + - updated translations: cs, de, fr, ja, sv, tr + + +xsane-0.77 -> 0.78: +------------------- + + - when the backend defines a new scanner surface it is updated correct now + when the reduced preview surface does not limit the new surface + (added expand_surface to preview_update_surface() + + - preview scan is aborted when backend sends more image data than expected, + the preview image is saved in this case + + - the preview image is saved now when the preview scan is canceld, so the + already scanned part of the preview keeps visible + + - when two preview levels have comparable quality it is used the preview + that is more up to date (scanned later) + + - applied sanei_wire.c patches from sane-backends-1.0.5 to xsane-rc-io.c + + - changed default values: histogram, and standard options windows are visible by default now + + - added function (pirate icon) to delete preview image cache + + - added mail project dialog + + - added mail setup dialog + + - added routines for sending images by mail (base64encoding, mail headers, smtp headers) + + +xsane-0.78 -> 0.79: +------------------- + + - added test for lstat in configure/configure.in/config.h.in + + - when lstat is available it is used for testing netscape lock file, + otherwise stat is used + + - changed order of include lines in xsane-save.c + + - for OS/2: in xsane_back_gtk_make_path() a colon ":" is replacte by "_" + + - changed last argument of xsane_back_gtk_set_tooltip from char to gchar + + - added function xsane_widget_test_uposition(GtkWidget *gtk_window) + that does test if gdk_window_get_deskrelative_origin or + gdk_window_get_root_origin gives the correct positions. + test is done with "scanning for devices" window. + + - in xsane.c changed #if 1 to #ifdef BUGGY_GTK_TOOLTIPS_SET_COLORS + + - split preview_increment_image_y in ... and preview_test_image_y, + test is called before a byte is copied into the buffer + + - xsane-preview.c: preview_scan_start: preview image memory is only cleaned for + single pass mode and 1 pass of 3 pass mode (3 pass preview does work again) + + - mail is sent in subprocess + + - added "MIME-Version: 1.0" to mail header + + - added mail status in mailfile, error messages while sending are stored in this file too + + - aclocal.m4 test for gimp: moved saving of GTK_* to beginning of routine, + the GTK_* things should be set correct now when gimp-config is not found + + - xsane.h: mail is deactivated when png is not available + + - added preferences menu item "Medium": + The highlight/shadow/gamma values are defined to the intensity range + of the selected medium (e.g. agfa negative). + If possible the analog highlight/shadow function is used, + if not then the scanner internal digital gamma table is used + in bot then xsane´s internal gamma correction is used. + When the correct medium is selected it only is necessary to + do "soft" color corrections. Because of this the 400% values + in brightness/contrast have been reduced to 100% values now. + This is a typically range that e.g. also is used by the gimp. + If someone needs the larger ranges, change the following definitions + in sane.h: + #define XSANE_BRIGHTNESS_MIN -100.0 + #define XSANE_BRIGHTNESS_MAX 100.0 + #define XSANE_CONTRAST_GRAY_MIN -100.0 + #define XSANE_CONTRAST_MIN -100.0 + #define XSANE_CONTRAST_MAX 100.0 + + - moved call xsane_update_counter_in_filename as correction for counter length from + xsane_start_scan to xsane_scan_dialog (before open command), this way the + counter also is correct when the file is not transformed (pnm). + + - corrected xsane_update_counter_in_filename: removed some pointer bugs when skipping + exisiting filenames + + - added test for os2.h to configure/configure.in + + - added set_gimp_PLUG_IN_INFO(&PLUG_IN_INFO); for os2 + + - removed "+0.5" in calculation of negative preview gamma table. A gamma value of 1.000 does + not change the image data any more + + - effective user id is set to real user id in all subprocesses + + - cancel preview does now only call sane_cancel and tests for SANE_STATUS_CANCELLED while + reading image data. + + +xsane-0.79 -> 0.80: +------------------- + + - moved setting of medium gamma correction values from xsane_set_medium_callback in xsane.c + to xsane_set_medium in xsane-gamma.c + + - xsane_set_medium is called in xsane_scan_dialog and in preview_scan + + - replaced predefined areas 10x14 cm and 14x10 cm by 10x15 cm and 15x10 cm + + - updated documentation (partly) + + - correcting image height when canceling conversion to jpeg format, + program does not crash any more + + - added russian translation - thanks to John Profic <profic@lrn.ru> + + - solved problem with lineart image saved as png (wrong byte width) + + - moved medium selection menue from preferences menu to xsane main dialog + + - inactive backend options are not saved to the device-rc file + + - added progress_bar to the paramter list of xsane_save_* + + - added xsane-viewer.c and xsane-viewer.h to the src directory + + - added fflush(outfile); to end of rotation routine, this seems to + solve a problem of incomplete files when rotating the image file + + - added routine xsane_read_pnm_header to get correct header offset + and read geometrie values + + - for saving routines now the header offset and geometrie values of + xsane_load_pnm_header are used instead of xsane´s internal values + + - changed handling of color identification: + old: xsane_color == 0 => grayscale/lineart + new: xsane_colors == 1 => grayscale/lineart + + - when image is saved as postscript file (not copy mode etc) + then the bounding box exactly surrounds the image now. + Removed psfile parts from setup and preferences. + + - xsane_widget_test_uposition(gtk_window) does wait now until + gtk_window is realized before gtk_widget_set/get_uposition + test is done + + - for hpux added include of alloca.h to sane.h + + - added function xsane_debug_message that is used for DBG when + gcc is not used because defines with variable arguments is + not ANSI. + + - updated translations: cs, de, fr, ja, ru, tr + + +xsane-0.80 -> 0.81: +------------------- + + - xsane-gamma.c: + void xsane_calculate_raw_histogram(void): changed "maxval_raw = 0;" to "... = 1;" + void xsane_calculate_enh_histogram(void): changed "maxval_enh = 0;" to "... = 1;" + this avoids a floating point exception on some systems + + - xsane-viewer.c: set default viewer size from 400, 400 to + 0.3 * screen_width, 0.5 * screen height + + - xsane-save.c: xsane_save_rotate_image() swaps x and y resolution when + rotation 90 or 270 degree + + - removed slash at end of mkdir("~/.sane/xsane/"), OS/2 did not like this + + - when temporary direcotry is not defined (xsane.rc does not exist) + then xsane at first tries to read the environment variable + defined by ENVIRONMENT_TEMP_DIR_NAME (default TMP) and if that + does not exist it uses a predefined (TEMP_PATH) path. + When xsane.rc does exist the temporary directory stored in xsane.rc is used. + + - added blur and despeckle selction dialog to select filter radius + + - changed viewer and preview window type from GTK_WINDOW_DIALOG to GTK_WINDOW_TOPLEVEL + + - preview gamma does not have any effect to the enhanced histogram any more + + - preview does medium gamma correction now when scanner does not support + gamma tables + + - medium selection is disabled for lineart mode, gamma table is set to default + in this case. This guarantees that advanced lineart preview (by grayscale scan) + does work conform to the real scan. + + - default resolution set to 72 dpi (if no resolution is defined by backend) + + - added scanning/valid/incomplete/invalid pixmap to preview action area + + - preview cancel does call preview_get_image_data after canceling the + scan, this makes sure that xsane does detect a cancled scan when + gdk_input does not detect closing the select_fd (what happens when + the backend does close the select_fd too early (what is allowed by + the sane standard)) + + - scan cancel does make sure that xsane_read_image_data is run + after sane_cancel is called + + - added SIGTERM handler: xsane_quit() is called on SIGTERM + + - when faxproject/xsane-fax-list can not be created an error + message is printed and the creation of the project is aborted + + - in saving mode temporary conversion file is removed after conversion + + - corrected wrong filenames while saving mail image after scanning + + - added ocr function to viewer + + +xsane-0.81 -> 0.82: +------------------- + + - number of medium items and area definitions is calculated by size of the + structure now. + + - Improved security of temporary file handling: + - replaced mktemp() my mkstemp() in xsane_back_gtk_make_path. + The filename format changed because mkstemp creates the file + and so it is not possible to add an extension and the file + has to end with "XXXXXX" what is replaced by the safe random number + generated by mkstemp. + + - before creating the image filename in xsane-scan.c the filename + is removed only if the created file is not a temporary file. + + - removed remove() in xsane_save_image_as_lineart() + + - added routine xsane_create_secure_file() that makes sure that the created + file does not follow a symlink + + + - when an error occurs while saving a file or the saving is aborted then + the created image is removed + + - swaped order of opening inputfile and outputfile (outputfile now first) in + xsane_save_image_as_lineart() + + - viewer_save_callback(): several changes for saving as lineart + + - moved xsane_update_histogram() at end of xsane_update_gamma_curve() + into if (xsane.preview) block - this avoids segfault on some systems + + - despeckle radius and blur radius dialogs are closed before routine is started + + - removed bug in despeckle routine + + - increased speed of despeckle routine by about factor 6 + + - changed despeckle radius range from 1-9 to 2-10 + + - changed blur radius range from 1-9 to 2-20 + + - routines xsane_draw_histogram_with_*() do not have parameter "int invert" any more, + the inversion already is done in the medium dependant histogram of the preview. + + - added image scaling routine to viewer + + - added spanish translation (es.po) - thanks to + Gustavo D. Vranjes <gvranjes@abaconet.com.ar> + + - added dutch translation (nl.po) - thanks to + "Wim Sinke" <sinke@wirehub.nl> + + +xsane-0.82 -> 0.83: +------------------- + + - scaling image size does work for 16 bit images now + + - xsane_create_secure_file() now always removes the file (not only if it is a link), + this is needed because open(..., O_EXCL) does fail when the file exists (what can + happend when we want to overwrite an existing file). + + - removed buggy ";" at end of if statement in xsane_enhancement_negative_callback + + - default mode is viewer instead of saving mode + + - updated po-files: nl + + - xsane-front-gtk.c: void xsane_progress_cancel(GtkWidget *widget, gpointer data) + changed GtkSignalFunc callback = (GtkSignalFunc) data; to + GtkFunction callback = (GtkFunction) data; + + - added media, experimentally determined values with UMAX Powerlook3: + Agfa XRG 200-4 + Agfa HDC 100 + Konica VX 100 + Rossmann HR 100 + + - preview.c: preview_update_surface calls preview_update_selection at first to + make sure that the preview selection is up to date. Now xsane comes up with + the saved area selection when e.g. transparency mode is stored which forces + a change of the surface + + - removed parameter negative from xsane_calculate_auto_enhancement, + autoenhancement does work again when negative button is pressed + + - added mode "--Medium-definition"/"-M": + - preview is done without scanner gamma correction for medium + - added two icons to the main dialog: medium new and medium delete + + - added xsanedocdir to doc/Makefile.in and src/Makefile.in + the path is used by xsane.c and the mentioned Makefiles + + - removed in xsane-viewer.c, line 222: xsane_create_secure_file(outputfilename) before + xsane_save_image_as(...) + + +xsane-0.83 -> 0.84: +------------------- + + - if xsane-license.txt is not found when it shall be displayed then xsane does + print an error message and behaves like when the user did not accept the license. + + - if xsane-startimage.pnm is not found then an image of the size 1x1 pixel is + created instead. This should normally never happen but some people start + xsane without that it has been installed. Then the behaviour of the preview + has been undefined before. + + - removed "rm -f $cache_file" when gtk or sane was not found in configure.in, + this was bad when a user used a global cache file + + - viewer is created with image size - if possible + + - added serbian translation file (sr.po) - thanks to Du¹ko Rusmir <drusmir@gmx.ch> + + - xsane_sigpipe_handler: changed + xsane_cancel_save(0); + to + xsane_cancel_save(&xsane.cancel_save); + + - updated po-files: es, fr, ja, nl, ru, sr, tr + + - x and y resolution information are added to jpeg and png files now + + - preview zoom buttons are now also available when backend does geometry + options with unit pixel + + - added Plustek logo + + +xsane-0.84 -> 0.85: +------------------- + + - replaced xsane_control_option by back_gtk_set_option in xsane_set_resolution. + if changing resolution causes a SANE_RELOAD_OPTIONS this is handled now. + + - replaced xsane_save_scaled_image by a routine that does a blur over all covered pixel + insetad of using one pixel in the middle of the covered area + + - changed radius definition of blur and despeckle, now r=1 means nothing happens + + - extended blur routine, radius is now of type float, so you e.g. can blur with a + radius of 1.3. + + - replaced all xsane*_scale_new* by xsane*_range_new*, the range can be displayed as: + - slider (scale) + value on right + - slider (scrollbar) + value on right + - spinbutton + - scale + spinbutton + - scrollbar + spinbutton + the user can select, which disply mode he likes to use. + + - added timeout callback for xsane_resolution to set correct quantisation + + - Some people complained that the user has to accept the GPL to use the program. + In fact from the view of the GPL it is not necessary that the user accepts + the license to run the program. But it is important that the user reads + and accepts the "NO WARRANTY" part of the license. Due to this I created + two license dialogs: + - EULA-Dialog displays the "NO WARRANTY" part of the GPL + - GPL-Dialog displays the compelte GPL + To run the program the user has to accept the "NO WARRANTY" agreement + after installation and each update of xsane. + I hope this compromise is usable for every side. Please understand and + accept that it is necessary in some countries that the user accepts the + no warranty agreement to make sure that the authors and others do not + have to pay any compensation in the case of any damage + + - removed bug in scan and in preview-scan 16 bit routines when + sane_read returned with odd number of bytes + + - reduced maximum filename counter length from 10 digits to 9 digits. + (10 digits need more than long int, long long int is not portable (not ANSI C)) + + - update_counter_in_filename does not touch the counter when step = 0 and + min_length = 0 + + - added preview function autoraise_scanarea (may be the name is stupid?): + if you select this function and click to an image then the image + is selected as scanarea + + - colored preview pipette icons and zoom icons + + - Changes/preparation for gtk+-2.0: + + - added xsane-gtk-1_x-compat.h that wraps gtk+-2.0 functions to gtk+-1.x functions + when gtk+-1.x is used + + - replaced all gtk_accel_group_attach() by gtk_window_add_accel_group() and + gtk_menu_set_accel_group() + + - repleaced all GTK_WINDOW_DIALOG by GTK_WINDOW_TOPLEVEL + + - addeded alternative part that uses gtk_text_view (gtk+-2.0) instead of gtk_text (gtk+-1.x) + + - repleaced all gtk_signal_connect* by g_signal_connect* and defined makros for gtk+-1.x + - repleaced all gtk_signal_handler* by g_signal_handlers* and defined makros for gtk+-1.x + + - repleaced (gtk+-1.x) + gtk_widget_draw(hist->pixmapwid, &rect); + for gtk+-2.0 by + gtk_widget_queue_draw(hist->pixmapwid); + gdk_window_process_updates(hist->pixmapwid->window, FALSE); + + - filename entry is not set directly by gtk_entry_set_text(), it is set + by xsane_set_filename() now + + +xsane-0.85 -> 0.86: +------------------- + + - reversed the change of xsane-0.84->0.85 that replaced + xsane_control_option by back_gtk_set_option in xsane_set_resolution. + If resolution change causes a SANE_RELOAD_OPTIONS this is not handled any + more. + Reason: It caused a segfault in different situations when panel_rebuild + was called. I tried to implement that it works like expected, but the + resolution option needs a lot of special cases handling that makes it + very hard to handle this. Also the gtk slider does not work when + the panel is rebuild each time when the value is changed. + + - increased vendor length from 9 to 12 characters. + + - changed dialog of viewer/scale + - The dialog uses xsane_range instead of a spinbutton now + - The scale sliders for x and y can be binded now, + + - added %%Pages: 1 1 to header of postscript files in xsane-save.c + + - changed preview zoom icons and function names: + - changed icon and name of zoom_in to zoom_area + - added new function zoom_in: if enabled a zoom cursor + is selected and when the user clicks to the preview + with the left or middle mouse button then it is zoomed + to the clicked position + + +xsane-0.86 -> 0.87: +------------------- + + - preview_update_maximum_output_size: function sets block bit + at beginning of routine and resets it at end of routine, this + way it is made sure that the function is not called + recursive. This avoids infinite loops when backend + changes geometry options. + + - xsane-device-preferences.c: saving and loading device options + does test for num_options now + + - added xsane.ipc_pipefd and gdk_input_add(xsane.ipc_pipefd,...), + a child process can write to the pipe and xsane displays the + text in an error dialog (not for win32) + - added inter process communication pipe. When a child process + wants to display an error message it can write the message to + ipc_pipefd[1] and xsane will display the message in an error dialog + + - xsane_back_gtk_decision_dialog can handle multiple dialogs now, + (used by xsane_back_gtk_error/warning/message/info + + - added clear/redraw histogram to xsane_set_sensitivity() + removed clear/redraw histogram near calls to xsane_set_sensitivity() + + - add xsane_sigchld_handler to cleanup zombie child processes, + this replaces xsane_mail_send_process_exited() + + - changed progress bar pipe of ocr program: + -default option is "-x" (gocr) + -default progress keyword is "" (gocr) + -expects to values: "%d %d\r", main, sub + first value is used for progress bar, both are printed as text + + - moved at the end of function xsane_device_dialog() + the call xsane_set_all_resolutions(); after xsane_refresh_dialog(); + this way the backend default resolution is not overwritten at program startup + + - changed calculation of aspect for startimage in preview_update_surface() from image aspect + to preview aspect + + - xsane-scan.c saving lineart image as grayscale does work correct now: + - fwrite writes correct number of bytes + - x value is stored in global struct XSane so that it is not reset at + the beginning of xsane_read_image_data() + + - moved ocr routine from xsane-viewer.c to xsane-save.c + + - ocr routine can be selected by saving image as ".txt" or ".text" format + + - added filetype menu to fileselection dialog + + - changed behaviour of filetype menues: the extension immedeatly is added to/changed in + the filename (and is not added/corrected when the scan begins). + Now the filetype menu does behave the same way as gimp does. This means that + you e.g. can select filetype "jpeg" and name the file "image.pnm", in this + case the filetype is (like selected) "jpeg". I do not like this, but this is + how most programs do handle this situation. + + - filetype is saved in preferences + + - filetype "by ext" is handled as "" instead of NULL now + + - selected working directory is saved in xsane preferences + + - error_xpm, warning_xpm and info_xpm got a little 3d look + + - added test for gtk2 to aclocal.m4 and configure.in/configure + + - added bind_textdomain_codeset(xsane.prog_name, "UTF-8"); after bindtextdomain + + - gtk-fileselection for selecting directories: for gtk2: + - selection_entry hidden + - added "/." to end of predefined path + - for gtk1 the text in selection_entry is removed from the filename after selection has finished + + - updated translations: de, tr, ja, es, fr, cs, sv + + - new translation: sk (slovakian), thanks to Zdenko Podobný <zdpo@mailbox.sk> + + - changed configure script to support gtk2 + + +xsane-0.87 -> 0.88: +------------------- + + - xsane_back_gtk_range_new: made sure that digits is not negative + and for gtk+-1 that digits<6 + + - xsane_load_mail_project: changed "char c" to "int c" to get a chance to + identify EOF + + - xsane_load_fax_project: changed "char c" to "int c" to get a chance to + identify EOF + + - xsane_resolution_list_callback: changed "gchar *name" to "const gchar *name" + + - xsane_add_medium_definition: changed "char *definition_name" to "const gchar *definition_name" + + - added xsane-batch-scan.[ch] + + - added routine preview_create_batch_icon_from_file() to xsane-preview.c + + - xsane_batch_scan_update_icon_list is called by xsane_enhancement_by_gamma via a timer + this way a gamma correction also is visible in the icon list + + - added xsane.scan_rotation that is used by xsane-scan.c instead of xsane.preview->rotation + + - updated translations: cs, de, es, ja, ru, tr + + +xsane-0.88 -> 0.89: +------------------- + + - 3 pass scanning: data interleaving is done in buffer, patch by <Oliver.Friedrich@hamburg.de> + + - replaced fork() by spawnvp for ocr command in xsane-save.c (patch by Franz Bakan) + + - xsane_save_jpeg does reduce a 16bit/sample images to 8bit/sample at first because jpeg does + not support 16 bit/sample + + - xsane_save_ps does reduce 16bit/sample images to 8bit/sample while saving + + - When scanning to file (mode SAVE) then the warning about image depth reduction 16->8 bit/sample + for jpeg and postscript is not printed any more. + + - Since april 2000 there is defined a pnm (ppm/pgm) format for 16 bit binary images. + With this format the unofficial RAW16 format that has been used by xsane until version 0.88 + becomes senseless. The RAW16 format has been removed, xsane does create 16 bit binary pnm files + now (the difference between the RAW16 and the pnm16binary format is that the pnm16binary format + always uses MSB first while RAW16 was written in machine byte order). + In preferences-Setup->Image there is a selection if the pnm16 image shall be saved in ascii or + binary format. + When you have any problems with the pnm16binary format then make sure at first that the program + you use does support it correct. imagemagic does support it, the xv version 3.10a does not + support it. + + - read_pnm_header now does read the gamma, contrast, brightness, threshold values, so when these + data is saved in an image then it is correct now. + + - gamma, brightness, contrast and threshold are added in the header of pnm files now + + - when 16 bit image is scanned and "reduce 16bit image to 8bit" is selected and the image + is saved as pnm then the file is created correct now + + - batch scan thumbnail: replaced gdk_image by gtk_preview + gdk_image needs pixel colors based on hardware, gtk_preview uses truecolor pixels. + + - added po file converstion to utf8 in po/Makefile[.in] + + - added documentation for batch scan window + + - changed page size in range from (max-min)*1e-40 to (max-min)*1e-30 + because some systems like solaris had problems (one long bar that + could not be moved) + + - xsane-preview.c: in case of an error the error error text is created before + preview_scan_done is called when parameters->* are needed for creating the + error message + + - made html pages compatible to html 4.01 + + - changed header of postscript files, may be this solves the printing problem on some systems + + - added "%%EOF" to end of postscript files + + - updated translations: cs, de, fr, ja, nl, ru, sv (update for 0.88), tr + - new translations: pt, pt_BR + + - add no_device icon in error message: no devices available + + - added help_no_devices dialog + + - added device icon in device_scanning_dialog + + - added a frame in the decision dialog + + - when preview_autoselect_scanarea does not find an image then + the complete image is used + + - added accelerator key ESC to decision dialog: + when a reject button (right) is available then ESC=reject, + when no reject button is available then ESC=OK. + + - set block_update_maximum_output_size_clipping in preview_rotation_callback, + now rotation does work like expected when in copy mode + + - added paper_orientation menu in copy mode + + + +xsane-0.89 -> 0.90: +------------------- + + - replaced "round(i+0.5)" in xsane_save_ps by "ceil(i)" because round is not + available on all systems + + - replaced order of includes for sys/types.h ans sys/stat.h in xsane.h + + - removed some includes from some *.c files that are already in xsane.h + + - added to xsane.h: + #ifdef HAVE_OS2_H + # define strcasecmp stricmp + #endif + + - always set position of outputfilename_entry to the right + + - added test for (pid_status < 0) in xsane_fax_send in routine + waiting for child process. The program does continue now + when the fax is sent. + + - fax setup: added "set program defaults" buttons for efax, hylafax and mgetty+sendfax + + - bindtextdomain for backend is set for sane-"backendname" and sane-backends + sane-backends is used when sane-"backendname" does not exist (no "" entry) + + - set codeset for backend textdomain to "UTF-8" + + - xsane-preview.c: motion_notify_event_handler: added + if (p->selection_xedge != -1) and if (p->selection_yedge != -1) + before setting new coordinates + + - xsane-preview.c: added aspect_ratio function to motion_event_handler + + - added aspect_ratio menu to preview window + + - xsane-save.c: save_scaled_image: added " 0.5" to round image width and height + + - xsane-viewer.c: added widgets to scale dialog that allow defining image size + + - aclocal.m4: added "-lintl" when gettext is found in libintl + + - aclocal.m4: added warning that check for gtk is not possible when pkg-config + is not available + + - added romanian (ro.po), vietnamese (vi.po) and danish (da.po) translation + + - updated translation based on xsane-0.89 texts: es, it, ru + + - updated translations: cs, de, fr, nl, sk, tr + + - replaced some signals for spinbutton by signals for adjustments in xsane-viewer.c + + - xsane_mail_dialog_close() and xsane_fax_dialog_close(): + removed gtk_window_remove_accel_group(GTK_WINDOW(xsane.mail_dialog), xsane.accelerator_group); + + - xsane-scan.c/xsane_read_image_data() and xsane-preview.c/preview_read_image_data: + when we have no select_fd then we don't leave the scanloop with break; but + we do a gtk_main_loop and continue; + + - xsane-scan.c and xsane-preview.c: WIN32 now also does use the gdk_input_add functions. + + - preview: added output of RGB values of the pixel under the pointer in the preview + + - xsane_create_preview_gamma_curve: replaced 255 by 255.99999 to create correct preview gamma table + + +xsane-0.90 -> 0.91: +------------------- + + - xsane_generate_dummy_filename(): use temporary file in case xsane.mode == XSANE_GIMP_EXTENSION + + - changed <Shift> accellerator keys that used letters to other key (if possible same key with <Ctrl>, + because with these accelartor keys it was not possible to enter these letters in any entries. + + - added accelerator group to mail dialog again, it is now possible to enter all texts and use + the accelerator keys at the same time + + - added zoom of image under the pointer to the preview window + + - removed all c++ style remarks "//" + + - changed behaviour of medium definition mode: + - The raw histogram now does show the raw data when the selected medium definition + is not set to the full range + - When creating a new medium definition the name of the used definition is preset + - When creating a new medium definition then this definition is selected + - When deleting a definition then the previous definition is selected + + - renamed temporary file "preview-level*" to "xsane-preview-level*" + + - position of batch scan dialog is saved in device preferences + + - added chines tranlation (zh) + + - corrected RGBA mode + + - added blocking function to viewer: it is not possible to open two dialogs for the same + viewer at the same time + + - added signal handling for SIGINT and SIGHUP + + - in Batch scanning mode sane_cancel is called between all scans! This has to be done + because it is not allowed to change scan parameters between sane_start and sane_cancel. + + +xsane-0.91 -> 0.92: +------------------- + + - moved setting of preview gamma table from preview_start_scan (called 3 times for + 3 pass scan) to preview_scan (called once when "preview scan" button is pressed). + This should avoid error messages in 3 pass scanning mode + + - removed parameter label from xsane_back_gtk_autobutton_new() + + - xsane_back_gtk_autobutton_update sets range widget to insensitive in automatic mode + + - added jpeg error_exit handler + + - added several tests for errors after wrting image data (full disk) (not complete) + + - if an advanced option is defined in a standard group then this option is listed in + the advanced options window now. For this a standard group also is created in the + advanced options window. If a group has no items then the group is not shown. + + - an option without SANE_CAP_SOFT_DETECT is not read any more in xsane_control_option + + - updated translations: sv + + +xsane-0.92 -> 0.93: +------------------- + + - added ranlib to lib/Makefile.in to process liblib.a + + - added 2 calls xsane_find_best_resolution() in xsane_resolution_widget_new() + to make sure that active value really is selectable in a list of resolutions + + - added range values 9-25% to scaling list of xsane-viewer: 9, 13, 18, 25, 35, 50, 71, 100, 141, 200, 282, 400 + + - when no docviewer is defined at xsane startup (generally when xsane is started the first time) then + xsane tries to read the environment variable $BROWSER, if this fails it sets docviewer to netscape. + + - xsane-preferences.c: mail dependant entries are only used when mail is activated + + - replaced label HAVE_LIBGIMP_GIMP_H by HAVE_ANY_GIMP + HAVE_ANY_GIMP is defined in configure.in when HAVE_GIMP=yes + + - added HAVE_GIMP_2 parts to xsane.c, xsane.h and xsane-save.c + HAVE_GIMP_2 is defined by configure.in when GIMP-2.0 was found + + - created subdirectory m4 and put self written macros from aclocal.m4 to m4/*.m4, + copied gtk.m4, gtk-2.0.m4 and gimp-2.0.m4 from aclocal installation to m4 subdirectory, + gimp-orauch.m4 contains a modified gimp.m4 that also can handle gimp-1.0.x + (the original script only does work when gimptool is installed, gimp-1.0.x comes without it) + a new aclocal.m4 can be created with "aclocal -I m4/." + + - configure.in: changed AM_FUNC_ALLOCA to AC_FUNC_ALLOCA + + - configure.in + src/xsane.c: changed PACKAGE_VERSION to XSANE_PACKAGE_VERSION + because PACKAGE_VERSION did not work any more, looks like a new feature of aclocal or autoconf + + - updated translations: de, it, da, cs, nl, es, sk, ro, fr + + - po/Makefile.in: added test for msgfmt, gmsgfmt, gencat + +xsane-0.93 -> 0.94: +------------------- + + - changed "µs" to UTF8 codeset + + - added test and warning message if option is defined without name (NULL) + to xsane_panel_build + + - added handling for options with of SANE_TYPE_INT and SANE_TYPE FIXED + with CONSTRAINT_TYPE_NONE , uses spinbutton, no sliders + + - changed default medium definition of Slide from highlight=30% to highlight=40% + + - xsane_[back_gtk_]option_menu_new: added empty element to end of list + xsane_[back_gtk_]option_menu_lookup: test for existing element before comparision + + - moved media defintions from xsane.rc to xsane.mdf + + - preview: preset area: added definition name to context menu items + + - preview: add preset area: you can change the suggested name now + + - medium definitions: added same context menue like in preset area menu, + removed buttons "add medium" and "delete medium", they are in the + contect menu now + + - added documentation how to use a medium and how to define a medium + + - improved documentation how to edit the preset area definitions + + - in edit medium definition mode autmatic scanarea selection and automatic + color correction is disbaled + + - docs: replaced www.mostang.com/sane by www.sane-project.org + and sane-devel@mostang.com by sane-devel@lists.alioth.debian.org + + - batch_scan default list is loaded at program startup + + - added test for BUGGY_GDK_INPUT_EXECEPTION in xsane.c and xsane-preview.c + when gdk_input_add shall be used + + - changed order in xsane.h: system includes are moved to the beginning of + the file. This way it is possible to test for operating system header files + to decide how some #defines are made + + - added m4 makro test for msnative struct for windows + + - BUGGY_GDK_INPUT_EXCEPTION is defined for windows + + - src/Makefile.in: removed both "\" in + -DPATH_XSANE_DOC_DIR=\$(xsanedocdir) -DPATH_SANE_DATA_DIR=\$(sanedatadir) + + - created new xsane-WIN32-compilation.txt + + - for windows the GTK1 version of xsane_window_get_position is used + + - xsane_back_gtk_get_filename: directory is prepared with ending SLASH + instead of ending "/.", this does work with windows now when SLASH is \ + + +xsane-0.94 -> 0.95: +------------------- + + - For xsane-win32 the xsane icon is added to the windows ressource of xsane.exe: + added definition of XSANE_ICON=xsane-icon.opc to configure[.in] + added creation rule of xsane-icon.opc to src/Makefile[.in] + added @XSANE_ICON@ to XSANE_OBJS + + - in xsane_back_gtk_value_update: removed rounding (+ 0.5) in case SANE_TYPE_INT + + - changed menues in the xsane main dialog: + - added new menu "Window" + - moved Window menue entries form "View" to "Window" + - moved "Show resolution list" entry from menu "Preferences" to "View" + - moved "Update policy" entry from menu "Preferences" to "View" + - moved "Length unit" entry from menu "Preferences" to "View" + + - added test if resolution list is displayed or scale is displayed in + xsane_resolution_timer_callback(). Without this test it sometimes + happened that pressing CTRL+L (Swap show resolution list) caused a + segfault because the timer callback was executed in a moment where the + adjustment is not valid + + - added: if (???->window) + before each: gdk_window_process_updates(???->window) + in xsane-gamma.c, this made problems with gtk+2.x + + - when a postscript file is added to a faxproject then the original name of the + file is also used in the faxproject now. The pagecounter is still increased! + + - fax fine mode selection is stored in preferences now + + - handling of viewer filenames changed: + - when an image is saved in the viewer then the viewer shows the filename in + the window title and the viewer remembers the filename + - when the image has been changed after it has been saved then the filename + in the window title is shown in brackets + - when the filename ends with a number (counter) then the number is automatically + increased when the file is saved + - when a saved image is cloned then the suggested filename of the cloned image is + clone-of-"old-filename" + + - viewer: added support for different modification restrictions + - VIEWER_NO_MODIFICATION (only view) + - VIEWER_NO_NAME_AND_SIZE_MODIFICATION (some filters allowed but keep size, e.g. fax) + - VIEWER_NO_NAME_MODIFICATION (use given name, e.g. fax, mail) + - VIEWER_FULL_MODIFICATION (normal mode) + + - added undo function (1 step) to viewer + + - changed menues in the xsane viewer dialog: + - added menu "Edit" + - added menu "Geometry" + - moved Scale function from menu "File" to menu "Geometry" + - added rotation and mirror functions to menu "Geometry" + - added undo function to menu "Edit" + + - changed button boxes/icons in the xsane viewer dialog: + - added button boxes equal to menus: file, edit, filters, geometry + - added undo icon to edit box + - moved blur uand despeckle icon to filter box + - moved scale, rotation and mirrir icons to geometry box + + - replaced several "char buf[???];" by "char filename[PATH_MAX];" + + - changed fax mode: + - scanned images are stored in pnm format + - for each list entry there is a data and a type information now + - internal viewer is used now for pnm-fax files + - faxviewer is used for ps files + - before sending the fax pnm images are converted into ps images + - after sending the fax ps images are erased + + - changed e-mail mode: + - scanned images are stored in pnm format + - for each list entry there is a data and a type information now + - internal viewer is used now for pnm-mail files + - before sending the mail pnm images are converted into png images + - after sending the mail the png images are erased + - mail project status is translated now + - BUGFIX: end of email text is marked with 0 byte + + - added function xsane_viewer_set_sensitivity() + - moved all gtk_widget_set_sensitive(GTK_WIDGET(v->button_box), TRUE/FALSE); to it + - added several gtk_widget_set_sensitive(???_menu, TRUE/FALSE); commands to it + - moved almost all v->block_actions to it + - now it should not be possible any more to crash xsane by closing the viewer + while it is saving something + + - added info "reduce to lineart" to image_info + xsane-pnm-header + + - renamed viewer v->reduce_to_lineart to v->allow_reduction_to_lineart + + - save_image_as() now automatically reduces lineart images to pbm before saving + + - new translations: hu + + - updated translations: de, es, ja, pt, pt_BR, sk + + +xsane-0.95 -> 0.96: +------------------- + + - fax progress bar does not change it's height any more when the fax dialog is resized + + - mail progress bar does not change it's height any more when the mail dialog is resized + + - added lockfile to mail project. The lockfile contains status and progress information + from the mail_send_process and is used to display a progress_bar + + - mail status is only translated when it is displayed via gtk, in the data structures + the untranslated texts are used + + - changed mail_attach_image_png to mail_attach_image, mime type is defined by parameter + + - added filetype menu to mail dialog with filetypes PNG, JPEG and TIFF + + - bugfix: viewer saves lineart PNM images again as lineart (bug in xsane-0.95) + + - when image is saved as pnm and it is not reduced to lineart then the input file + is copied with xsane_copy_file => much faster + + - xsane-save.c: reordered function parameters for saving/conversion functions to + (outfile, infile,...) or (output_filename, input_filename, ...) + (before we had sometimes infile at first and sometimes outfile at first) + + - xsane_set_sensitivity: mail_dialog and fax_dialog: + the sensitivity off all but the progress_bar is set + + - While mail is prepared (images are converted) the xsane sensitivity is set to + FALSE to make sure that the xsane mode is not changed in this case. + while sending the mail (after preparation) the xsane sensitivity is set to + TRUE and the project entry sensitivity is also TRUE, it is allowed to + changed xsane mode and to change the mailproject, because the + sending of the mail is done in a separate process, so there is no + influence by changing the mail project name. + + - Comment: + When xsane is closed while sending one or more mails then xsane is closed + but the mail sending subprocesses are not terminated. + + - added SMTP (HELO/FROM/RCPT/DATA) errors to mail status + + - added xsane.fax_status, it is saved in the first line of the xsane-fax-list + this means that the fax project directories are incompatible to earlier versions! + + - added mail_status and fax_status = ..._CHANGED when a new page is added to + the project + + - updated images in documentation + + - updated email modus in documentation + + - email images are named "image-1" instead of "page-1" + + - fax_dialog_delete() and mail_dialog_delete() return TRUE now. + In windows it was possible to delete the dialogs what caused + a crash when the window should be used or closed. + + - translations: U=updated, N=not updated + cs da de es fr hu it ja nl pt pt_BR ro ru sk sl sr sv tr vi zh + U U U U U N N U U U U U U N N N N U U N + + - xsane-preferences.c: when identifier is unknown or not a string then + the parser does not abort or crash any more. + XSane now should not have any problems with old config files. + + +xsane-0.96 -> 0.97: +------------------- + + - write_smtp_footer(): changed ".\r\n" by "\r\n.\r\n", this + solves problems with microsoft exchange servers. + + - translations: U=updated, N=not updated, A=added/new + cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh + N N N N N N U N N A N N N N N N N N N N U + + - xsane-save.c: xsane_copy_file(): removed fclose(infile) and fclose(outfile) + this bug caused the error "*** glibc detected *** double free or corruption (!prev): 0x........ ***" + with new gelibc versions + xsane-save.c: xsane_copy_file_by_name(): added fclose(infile) and fclose(outfile) + + - rmoved gtk_events_pending() from the waiting loop in xsane_back_gtk_get_filename, + it looks like gtk_events_pending() increases CPU load very much. + + - xsane-scan.c: function xsane_reduce_to_lineart(): corrected order of filenames in + xsane_save_image_as_lineart() + + - xsane_device_dialog(...): uses sane_control_option instead of xsane_control_option + to read option number 0. This means that it is not needed that SANE_CAP_SOFT_DETECT + is set for option number 0 + + +xsane-0.97 -> 0.98: +------------------- + + - void xsane_batch_scan_scan_list(void): + added if (gtk_events_pending()) in while (xsane.scanning) + (this was removed in xsane-0.97 what made a lot of trouble) + + - corrected bad <Toolbox/...> italian transations for gimp plugin + + - added Postscript Zlib-Compression and Ascii-85 compression + (patch by Julien BLACHE <jb@jblache.org>) + + - added (single page) PDF saving routine + (patch by Julien BLACHE <jb@jblache.org>) + + - added PDF and Postscript to mail-mode. PDF and Postscript documents can not + be displayed inline in html mails. I also do not know a way to display a + link to a document that is integrated in the mail. So the <IMAGE> tag + has no effect for pdf and postscript documents in html mode. + + - --print-filenames prints the filenames after conversion, so it is + safe that the file exists and is complete + + - selected medium definition is stored in preferences now + + - BUGFIX for scanners that do not allow to set all resolutions. + In fax mode and possibly also in copy mode the created pages + had a wrong scaling when the scanner did not support the + desired resolution: + - xsane_set_resolution returns bestdpi = selected resolution + - xsane_set_all_resolutions stores bestdpi as used resolution + + - when option 0 (num_options) has not defined SANE_CAP_SOFT_DETECT + then xsane prints a warning but does try to read the option value + + - added xsane_mode (VIEWER/SAVE/EMAIL/FAX/etc) to preferences + + - po/*: all po files are in UTF-8 code now + to transform non-UTF-8 po files to UTF-8 put the po file + into the IMPORT_PO_DIR directory and call in the po directory + "make import-po-files" + + - rename xsane-logo2.jpg to xsane-logo.jpg and changed all + html files to xsane-logo.jpg + + - viewer uses preferences.filetype instead of "by ext" + + - localedir for sane-backends is set by sane-prefix instead of xsane-prefix + + - replaced printf by g_print to get correct output on non-utf-8 terminals + + - question mark '?' and asterisk '*' in filenames are replaced by underscore '_' + + - translations: U=updated, N=not updated, A=added/new + cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh + U U U N N U U N N N N N N U U N N N N N N + +xsane-0.98 -> 0.98a: +-------------------- + + - corrected gimp_plugin bug: + xsane_mode now is hold in xsane.xsane_mode like bevore xsane-0.98, + additionally preferences.xsane_mode is used to store the user + selection + the user selection is loaded at program start when nothing else is predefined + + +xsane-0.98a -> 0.98b: +--------------------- + + - changed bug in header file due to conficting types in xsane-front-gtk.h + from: int xsane_set_resolution(int well_known_option, double resolution); + to: double xsane_set_resolution(int well_known_option, double resolution); + + +xsane-0.98b -> 0.99: +-------------------- + + - added preferences/setup options: + - save_ps_flatdecoded + - save_pdf_flatdecoded + - fax_ps_flatdecoded + - printer[i].ps_flatdecoded + + - changed xsane-preferences reading routines for printer definitions and + preset area definitions + + - changed postscript and tiff saving routines: + - split in subroutines: + - create_document_header (ps, pdf) + - save image as page (ps, pdf, tiff) + - create_document_trailer (ps, pdf) + + - split xsane.c into xsane.c, xsane-fax-project.c and xsane-mail-project.c + + - created xsane-multipage.c that adds a multipage project dialog + supported file formats: + - ps + - pdf + - tiff + + - corrected viewer to display bits/sample and size correct + + - changed handling of viewer filename and filetype selection: + when a new viewer window is created then it copies the active + filename and filetype. Changing the viewer´s selection does not + change the prefered setting any more. + + - when no resolution option is available then xsane uses a resolution + of 72.0 dpi. This e.g. is used for postscript and PDF. + + - changed tiff saving routine: + - added deflate (zip) compression for 8 bit and 16 bit / sample images + - corrected jpeg rgb compression + + - changed mixed up e-mail names (mail, email, e-mail): + - all xsane internal names are: email + - all user visible texts are : e-mail + - changed acceleration key for email mode to GDK_E + - changed command line option from --mail and -m to --email and -e + + - changed name of notebook "image" to "filetype" + + - when force_filename is set then the filetype is defined by the filename + instead of preferences.filetype + + - project dialog position is saved in devices preferences now + + - when a dialog is closed then the position is stored in preferences + so it can be saved when the window is invisible at program exit + + - changed handling of ADF: + - removed ADF scanmode selection from setup + - added entry for number of pages to scan in xsane main dialog + - next scan is not started by + g_signal_emit_by_name(xsane.start_button, "clicked"); /* press START button */ + any more. This executed the next scan before all active scan subroutines + have been finished. Now we use + gtk_timeout_add(100, (GtkFunction)xsane_scan_dialog, NULL); + to start xsane_scan_dialog after 100ms. + + - batch scan window now uses preview levels (zoomed previews) to display batch icons + + - added ASMTP authentication PLAIN and LOGIN + + - changed size definition of preview window for GTK2 to gtk_window_resize() + + - added $(DESTDIR) before each destination path in all Makefile.in + + - made usage of MKINSTALLDIRS unique in all Makefile.in + + - cleaned up subdir intl + + - translations: U=updated (* for 0.99-pre1), N=not updated, A=added/new + cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh + U U U N N U N N U* U* N N N U N U N N U* N N +last upd 96 95 96 95 96 96 96 98 76 92 96 96 + + +xsane-0.99 -> 0.991: +-------------------- + - replaced all char buf[255], char buf[256] etc by char buf[TEXTBUFSIZE] + with #define TEXTBUFSIZE 255 + + - replaced all char filename[255] etc by char filename[PATH_MAX] + + - translations: U=updated (* for 0.99-pre1), N=not updated, A=added/new + cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh + N N N N N N U N N N N N N N N N N N N N N + 99 99 99 96 95 99 95 99 99 96 96 96 99 98 99 76 92 99 96 96 + + - added default multipage_filetype (PDF). + No default multipage_filetype produced the following problem: + - error message when creating multipage file: could not create secure file + + - lineart images are expanded to grayscale in multipage mode. + solves segmentation fault when "show page" in multipage project was selected + + - corrected calculation of width and height in copy mode for backends + that do not support arbitary resolutions + + - multipage mode: lineart images (that are stored as grayscale images) + are reduced to lineart before the page is put into the multipage file + + - viewer shows image info with bit depth = 1 when reduce_to_lineart is set + + - change handling of zoom (photocopy mode): + - now there is only one zoom value even if there is a resolution_x and + a resolution_y option, zoom_x and zoom_y are removed + - the zoom factor is directly used to define the image output size + (before the scanresolution was used to define the image output size) + - the resolution is not changed any more when an other printer with a + different printer resolution is selected + - replaced all char buf[255], char buf[256] etc by char buf[TEXTBUFSIZE] + +xsane-0.991 -> 0.992: +--------------------- + - there was still a bug concerning the gimp plugin + when xsane has been quit in copy mode and afterwards + started as gimp plugin then xsane used the printer paper + size in the preview window. This is solved now: + replaced preferences.xsane_mode by xsane.xsane_mode + in xsane_define_maximum_output_size() + + - xsane_save_scaled_image sometimes did not write the last line + and produced a tuncated image. this is corrected now + + - viewer: when saved image is cloned and the viewer of the cloned + image is closed then no dialog pops up any more + + - translations: U=updated, N=not updated, A=added/new + ca cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh zh_CN + A N N N N N N U N N N N N N N N N N N N N N A + 99299 99 99 96 95 99 95 99 99 96 96 96 99 98 99 76 92 99 96 96 992 + + - xsane-preview.c: preview_create_batch_icon(): + bugfix: files (in) are closed directly after use now, + bug report from Norman Hill - thanks + + - corrected order of filetypes in xsane_back_gtk_filetype_menu_set_history, now + the filetype are not mixed any more when the disk icon is pressed + + - replaced all "\n" by "\r\n" in email + + - corrected some signdness warnings in xsane-preview.c (buf) + + - fixed memory bug that caused crash when setup was closed (display_notebook): + added strdup to preferences.browser = strdup(getenv(STRINGIFY(ENVIRONMENT_BROWSER_NAME))); + + - added command line option --xsane-rc / -r to change give alternative filename for xsane.rc + + - added support for color management: + - added tab "color management" to setup/preferences + - preview can display ICC/ICM corrected images with 8bits/color and with 16bits/color input bit depth + - viewer can display ICC/ICM corrected images with 8bits/color and with 16bits/color input bit depth + - gamma correction and medium selection is disabled when color management is enabled + - added support for embedded ICC/ICM files for + - tiff + - jpeg + - png + - gimp plugin + + - replaced several GtkObject* by GtkWidget* to avoid type-punned-pointer warning + + - replaced several (void**) typecasts in xsane-rc-io.c to avoid type-punned-pointer warning + +xsane-0.992 -> 0.993: +--------------------- + + - removed proofing intent options saturation and perceptual, only relative and absolutle colorimetric are available now + + - added CMS transformation to saving routines: pnm(8bit), pnm(16bit ascii and binary), png, jpeg, tiff, gimp-plugin, ps, pdf + (missing routines: multipage) + + - added support for gtk_file_chooser_dialog + all filenames are handled as full paths (beginning with a slahs) now, + the "change working directory" option has been removed + + - made "CANCEL" and "OK" button positions the same as gimp uses it (CANCEL=left, OK=right) + + - added browse function for projects directories + + - removed bugs in mail mode: + write(fd, "\r\n\r\n", 2) -> write(fd, "\r\n\r\n", 4) + write(fd, "\r\n", 1) -> write(fd, "\r\n", 2) + + - added embedded ICC profiles for postscript (CSA+CRD) and pdf + + - added 12 bits/channel support for postscript + + - added flatedecode without Asci85 compression for PDF + + +xsane-0.993 -> 0.994: +--------------------- + + - corrected postscript bug: moved "/DeviceRGB setcolorspace" and "CSA... setcolorspace" from document setup to page setup + + - added black point compensation to printer setup dialog + + - xsane-scan.c: if (channels==1) then scanner_default_gray_icm_profile is used instead of scanner_default_color_icm_profile + + - xsane-scan.c: bugfix segfault when scanning: when scanner_default_color_icm_profile is not defined then "" is used instead of scanner_default_color_icm_profile + |