From 817e6294b42b3e4435f1b99728afc1dca84a6445 Mon Sep 17 00:00:00 2001 From: Mattia Rizzolo Date: Fri, 3 Oct 2014 14:05:03 +0000 Subject: Imported Upstream version 0.97 --- xsane.CHANGES | 720 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 719 insertions(+), 1 deletion(-) (limited to 'xsane.CHANGES') diff --git a/xsane.CHANGES b/xsane.CHANGES index d436827..b27cbf6 100644 --- a/xsane.CHANGES +++ b/xsane.CHANGES @@ -1928,7 +1928,7 @@ xsane-0.82 -> 0.83: xsane-0.83 -> 0.84: ------------------- - - if xsane-license.txt is not file when it shall be displayed then xsane does + - if xsane-license.txt is not found when it shall be displayed then xsane does print an error message and behaves like when the user did not accept the license. - if xsane-startimage.pnm is not found then an image of the size 1x1 pixel is @@ -1957,3 +1957,721 @@ xsane-0.83 -> 0.84: - added Plustek logo + +xsane-0.84 -> 0.85: +------------------- + + - replaced xsane_control_option by back_gtk_set_option in xsane_set_resolution. + if changing resolution causes a SANE_RELOAD_OPTIONS this is handled now. + + - replaced xsane_save_scaled_image by a routine that does a blur over all covered pixel + insetad of using one pixel in the middle of the covered area + + - changed radius definition of blur and despeckle, now r=1 means nothing happens + + - extended blur routine, radius is now of type float, so you e.g. can blur with a + radius of 1.3. + + - replaced all xsane*_scale_new* by xsane*_range_new*, the range can be displayed as: + - slider (scale) + value on right + - slider (scrollbar) + value on right + - spinbutton + - scale + spinbutton + - scrollbar + spinbutton + the user can select, which disply mode he likes to use. + + - added timeout callback for xsane_resolution to set correct quantisation + + - Some people complained that the user has to accept the GPL to use the program. + In fact from the view of the GPL it is not necessary that the user accepts + the license to run the program. But it is important that the user reads + and accepts the "NO WARRANTY" part of the license. Due to this I created + two license dialogs: + - EULA-Dialog displays the "NO WARRANTY" part of the GPL + - GPL-Dialog displays the compelte GPL + To run the program the user has to accept the "NO WARRANTY" agreement + after installation and each update of xsane. + I hope this compromise is usable for every side. Please understand and + accept that it is necessary in some countries that the user accepts the + no warranty agreement to make sure that the authors and others do not + have to pay any compensation in the case of any damage + + - removed bug in scan and in preview-scan 16 bit routines when + sane_read returned with odd number of bytes + + - reduced maximum filename counter length from 10 digits to 9 digits. + (10 digits need more than long int, long long int is not portable (not ANSI C)) + + - update_counter_in_filename does not touch the counter when step = 0 and + min_length = 0 + + - added preview function autoraise_scanarea (may be the name is stupid?): + if you select this function and click to an image then the image + is selected as scanarea + + - colored preview pipette icons and zoom icons + + - Changes/preparation for gtk+-2.0: + + - added xsane-gtk-1_x-compat.h that wraps gtk+-2.0 functions to gtk+-1.x functions + when gtk+-1.x is used + + - replaced all gtk_accel_group_attach() by gtk_window_add_accel_group() and + gtk_menu_set_accel_group() + + - repleaced all GTK_WINDOW_DIALOG by GTK_WINDOW_TOPLEVEL + + - addeded alternative part that uses gtk_text_view (gtk+-2.0) instead of gtk_text (gtk+-1.x) + + - repleaced all gtk_signal_connect* by g_signal_connect* and defined makros for gtk+-1.x + - repleaced all gtk_signal_handler* by g_signal_handlers* and defined makros for gtk+-1.x + + - repleaced (gtk+-1.x) + gtk_widget_draw(hist->pixmapwid, &rect); + for gtk+-2.0 by + gtk_widget_queue_draw(hist->pixmapwid); + gdk_window_process_updates(hist->pixmapwid->window, FALSE); + + - filename entry is not set directly by gtk_entry_set_text(), it is set + by xsane_set_filename() now + + +xsane-0.85 -> 0.86: +------------------- + + - reversed the change of xsane-0.84->0.85 that replaced + xsane_control_option by back_gtk_set_option in xsane_set_resolution. + If resolution change causes a SANE_RELOAD_OPTIONS this is not handled any + more. + Reason: It caused a segfault in different situations when panel_rebuild + was called. I tried to implement that it works like expected, but the + resolution option needs a lot of special cases handling that makes it + very hard to handle this. Also the gtk slider does not work when + the panel is rebuild each time when the value is changed. + + - increased vendor length from 9 to 12 characters. + + - changed dialog of viewer/scale + - The dialog uses xsane_range instead of a spinbutton now + - The scale sliders for x and y can be binded now, + + - added %%Pages: 1 1 to header of postscript files in xsane-save.c + + - changed preview zoom icons and function names: + - changed icon and name of zoom_in to zoom_area + - added new function zoom_in: if enabled a zoom cursor + is selected and when the user clicks to the preview + with the left or middle mouse button then it is zoomed + to the clicked position + + +xsane-0.86 -> 0.87: +------------------- + + - preview_update_maximum_output_size: function sets block bit + at beginning of routine and resets it at end of routine, this + way it is made sure that the function is not called + recursive. This avoids infinite loops when backend + changes geometry options. + + - xsane-device-preferences.c: saving and loading device options + does test for num_options now + + - added xsane.ipc_pipefd and gdk_input_add(xsane.ipc_pipefd,...), + a child process can write to the pipe and xsane displays the + text in an error dialog (not for win32) + - added inter process communication pipe. When a child process + wants to display an error message it can write the message to + ipc_pipefd[1] and xsane will display the message in an error dialog + + - xsane_back_gtk_decision_dialog can handle multiple dialogs now, + (used by xsane_back_gtk_error/warning/message/info + + - added clear/redraw histogram to xsane_set_sensitivity() + removed clear/redraw histogram near calls to xsane_set_sensitivity() + + - add xsane_sigchld_handler to cleanup zombie child processes, + this replaces xsane_mail_send_process_exited() + + - changed progress bar pipe of ocr program: + -default option is "-x" (gocr) + -default progress keyword is "" (gocr) + -expects to values: "%d %d\r", main, sub + first value is used for progress bar, both are printed as text + + - moved at the end of function xsane_device_dialog() + the call xsane_set_all_resolutions(); after xsane_refresh_dialog(); + this way the backend default resolution is not overwritten at program startup + + - changed calculation of aspect for startimage in preview_update_surface() from image aspect + to preview aspect + + - xsane-scan.c saving lineart image as grayscale does work correct now: + - fwrite writes correct number of bytes + - x value is stored in global struct XSane so that it is not reset at + the beginning of xsane_read_image_data() + + - moved ocr routine from xsane-viewer.c to xsane-save.c + + - ocr routine can be selected by saving image as ".txt" or ".text" format + + - added filetype menu to fileselection dialog + + - changed behaviour of filetype menues: the extension immedeatly is added to/changed in + the filename (and is not added/corrected when the scan begins). + Now the filetype menu does behave the same way as gimp does. This means that + you e.g. can select filetype "jpeg" and name the file "image.pnm", in this + case the filetype is (like selected) "jpeg". I do not like this, but this is + how most programs do handle this situation. + + - filetype is saved in preferences + + - filetype "by ext" is handled as "" instead of NULL now + + - selected working directory is saved in xsane preferences + + - error_xpm, warning_xpm and info_xpm got a little 3d look + + - added test for gtk2 to aclocal.m4 and configure.in/configure + + - added bind_textdomain_codeset(xsane.prog_name, "UTF-8"); after bindtextdomain + + - gtk-fileselection for selecting directories: for gtk2: + - selection_entry hidden + - added "/." to end of predefined path + - for gtk1 the text in selection_entry is removed from the filename after selection has finished + + - updated translations: de, tr, ja, es, fr, cs, sv + + - new translation: sk (slovakian), thanks to Zdenko Podobný + + - changed configure script to support gtk2 + + +xsane-0.87 -> 0.88: +------------------- + + - xsane_back_gtk_range_new: made sure that digits is not negative + and for gtk+-1 that digits<6 + + - xsane_load_mail_project: changed "char c" to "int c" to get a chance to + identify EOF + + - xsane_load_fax_project: changed "char c" to "int c" to get a chance to + identify EOF + + - xsane_resolution_list_callback: changed "gchar *name" to "const gchar *name" + + - xsane_add_medium_definition: changed "char *definition_name" to "const gchar *definition_name" + + - added xsane-batch-scan.[ch] + + - added routine preview_create_batch_icon_from_file() to xsane-preview.c + + - xsane_batch_scan_update_icon_list is called by xsane_enhancement_by_gamma via a timer + this way a gamma correction also is visible in the icon list + + - added xsane.scan_rotation that is used by xsane-scan.c instead of xsane.preview->rotation + + - updated translations: cs, de, es, ja, ru, tr + + +xsane-0.88 -> 0.89: +------------------- + + - 3 pass scanning: data interleaving is done in buffer, patch by + + - replaced fork() by spawnvp for ocr command in xsane-save.c (patch by Franz Bakan) + + - xsane_save_jpeg does reduce a 16bit/sample images to 8bit/sample at first because jpeg does + not support 16 bit/sample + + - xsane_save_ps does reduce 16bit/sample images to 8bit/sample while saving + + - When scanning to file (mode SAVE) then the warning about image depth reduction 16->8 bit/sample + for jpeg and postscript is not printed any more. + + - Since april 2000 there is defined a pnm (ppm/pgm) format for 16 bit binary images. + With this format the unofficial RAW16 format that has been used by xsane until version 0.88 + becomes senseless. The RAW16 format has been removed, xsane does create 16 bit binary pnm files + now (the difference between the RAW16 and the pnm16binary format is that the pnm16binary format + always uses MSB first while RAW16 was written in machine byte order). + In preferences-Setup->Image there is a selection if the pnm16 image shall be saved in ascii or + binary format. + When you have any problems with the pnm16binary format then make sure at first that the program + you use does support it correct. imagemagic does support it, the xv version 3.10a does not + support it. + + - read_pnm_header now does read the gamma, contrast, brightness, threshold values, so when these + data is saved in an image then it is correct now. + + - gamma, brightness, contrast and threshold are added in the header of pnm files now + + - when 16 bit image is scanned and "reduce 16bit image to 8bit" is selected and the image + is saved as pnm then the file is created correct now + + - batch scan thumbnail: replaced gdk_image by gtk_preview + gdk_image needs pixel colors based on hardware, gtk_preview uses truecolor pixels. + + - added po file converstion to utf8 in po/Makefile[.in] + + - added documentation for batch scan window + + - changed page size in range from (max-min)*1e-40 to (max-min)*1e-30 + because some systems like solaris had problems (one long bar that + could not be moved) + + - xsane-preview.c: in case of an error the error error text is created before + preview_scan_done is called when parameters->* are needed for creating the + error message + + - made html pages compatible to html 4.01 + + - changed header of postscript files, may be this solves the printing problem on some systems + + - added "%%EOF" to end of postscript files + + - updated translations: cs, de, fr, ja, nl, ru, sv (update for 0.88), tr + - new translations: pt, pt_BR + + - add no_device icon in error message: no devices available + + - added help_no_devices dialog + + - added device icon in device_scanning_dialog + + - added a frame in the decision dialog + + - when preview_autoselect_scanarea does not find an image then + the complete image is used + + - added accelerator key ESC to decision dialog: + when a reject button (right) is available then ESC=reject, + when no reject button is available then ESC=OK. + + - set block_update_maximum_output_size_clipping in preview_rotation_callback, + now rotation does work like expected when in copy mode + + - added paper_orientation menu in copy mode + + + +xsane-0.89 -> 0.90: +------------------- + + - replaced "round(i+0.5)" in xsane_save_ps by "ceil(i)" because round is not + available on all systems + + - replaced order of includes for sys/types.h ans sys/stat.h in xsane.h + + - removed some includes from some *.c files that are already in xsane.h + + - added to xsane.h: + #ifdef HAVE_OS2_H + # define strcasecmp stricmp + #endif + + - always set position of outputfilename_entry to the right + + - added test for (pid_status < 0) in xsane_fax_send in routine + waiting for child process. The program does continue now + when the fax is sent. + + - fax setup: added "set program defaults" buttons for efax, hylafax and mgetty+sendfax + + - bindtextdomain for backend is set for sane-"backendname" and sane-backends + sane-backends is used when sane-"backendname" does not exist (no "" entry) + + - set codeset for backend textdomain to "UTF-8" + + - xsane-preview.c: motion_notify_event_handler: added + if (p->selection_xedge != -1) and if (p->selection_yedge != -1) + before setting new coordinates + + - xsane-preview.c: added aspect_ratio function to motion_event_handler + + - added aspect_ratio menu to preview window + + - xsane-save.c: save_scaled_image: added " 0.5" to round image width and height + + - xsane-viewer.c: added widgets to scale dialog that allow defining image size + + - aclocal.m4: added "-lintl" when gettext is found in libintl + + - aclocal.m4: added warning that check for gtk is not possible when pkg-config + is not available + + - added romanian (ro.po), vietnamese (vi.po) and danish (da.po) translation + + - updated translation based on xsane-0.89 texts: es, it, ru + + - updated translations: cs, de, fr, nl, sk, tr + + - replaced some signals for spinbutton by signals for adjustments in xsane-viewer.c + + - xsane_mail_dialog_close() and xsane_fax_dialog_close(): + removed gtk_window_remove_accel_group(GTK_WINDOW(xsane.mail_dialog), xsane.accelerator_group); + + - xsane-scan.c/xsane_read_image_data() and xsane-preview.c/preview_read_image_data: + when we have no select_fd then we don't leave the scanloop with break; but + we do a gtk_main_loop and continue; + + - xsane-scan.c and xsane-preview.c: WIN32 now also does use the gdk_input_add functions. + + - preview: added output of RGB values of the pixel under the pointer in the preview + + - xsane_create_preview_gamma_curve: replaced 255 by 255.99999 to create correct preview gamma table + + +xsane-0.90 -> 0.91: +------------------- + + - xsane_generate_dummy_filename(): use temporary file in case xsane.mode == XSANE_GIMP_EXTENSION + + - changed accellerator keys that used letters to other key (if possible same key with , + because with these accelartor keys it was not possible to enter these letters in any entries. + + - added accelerator group to mail dialog again, it is now possible to enter all texts and use + the accelerator keys at the same time + + - added zoom of image under the pointer to the preview window + + - removed all c++ style remarks "//" + + - changed behaviour of medium definition mode: + - The raw histogram now does show the raw data when the selected medium definition + is not set to the full range + - When creating a new medium definition the name of the used definition is preset + - When creating a new medium definition then this definition is selected + - When deleting a definition then the previous definition is selected + + - renamed temporary file "preview-level*" to "xsane-preview-level*" + + - position of batch scan dialog is saved in device preferences + + - added chines tranlation (zh) + + - corrected RGBA mode + + - added blocking function to viewer: it is not possible to open two dialogs for the same + viewer at the same time + + - added signal handling for SIGINT and SIGHUP + + - in Batch scanning mode sane_cancel is called between all scans! This has to be done + because it is not allowed to change scan parameters between sane_start and sane_cancel. + + +xsane-0.91 -> 0.92: +------------------- + + - moved setting of preview gamma table from preview_start_scan (called 3 times for + 3 pass scan) to preview_scan (called once when "preview scan" button is pressed). + This should avoid error messages in 3 pass scanning mode + + - removed parameter label from xsane_back_gtk_autobutton_new() + + - xsane_back_gtk_autobutton_update sets range widget to insensitive in automatic mode + + - added jpeg error_exit handler + + - added several tests for errors after wrting image data (full disk) (not complete) + + - if an advanced option is defined in a standard group then this option is listed in + the advanced options window now. For this a standard group also is created in the + advanced options window. If a group has no items then the group is not shown. + + - an option without SANE_CAP_SOFT_DETECT is not read any more in xsane_control_option + + - updated translations: sv + + +xsane-0.92 -> 0.93: +------------------- + + - added ranlib to lib/Makefile.in to process liblib.a + + - added 2 calls xsane_find_best_resolution() in xsane_resolution_widget_new() + to make sure that active value really is selectable in a list of resolutions + + - added range values 9-25% to scaling list of xsane-viewer: 9, 13, 18, 25, 35, 50, 71, 100, 141, 200, 282, 400 + + - when no docviewer is defined at xsane startup (generally when xsane is started the first time) then + xsane tries to read the environment variable $BROWSER, if this fails it sets docviewer to netscape. + + - xsane-preferences.c: mail dependant entries are only used when mail is activated + + - replaced label HAVE_LIBGIMP_GIMP_H by HAVE_ANY_GIMP + HAVE_ANY_GIMP is defined in configure.in when HAVE_GIMP=yes + + - added HAVE_GIMP_2 parts to xsane.c, xsane.h and xsane-save.c + HAVE_GIMP_2 is defined by configure.in when GIMP-2.0 was found + + - created subdirectory m4 and put self written macros from aclocal.m4 to m4/*.m4, + copied gtk.m4, gtk-2.0.m4 and gimp-2.0.m4 from aclocal installation to m4 subdirectory, + gimp-orauch.m4 contains a modified gimp.m4 that also can handle gimp-1.0.x + (the original script only does work when gimptool is installed, gimp-1.0.x comes without it) + a new aclocal.m4 can be created with "aclocal -I m4/." + + - configure.in: changed AM_FUNC_ALLOCA to AC_FUNC_ALLOCA + + - configure.in + src/xsane.c: changed PACKAGE_VERSION to XSANE_PACKAGE_VERSION + because PACKAGE_VERSION did not work any more, looks like a new feature of aclocal or autoconf + + - updated translations: de, it, da, cs, nl, es, sk, ro, fr + + - po/Makefile.in: added test for msgfmt, gmsgfmt, gencat + +xsane-0.93 -> 0.94: +------------------- + + - changed "µs" to UTF8 codeset + + - added test and warning message if option is defined without name (NULL) + to xsane_panel_build + + - added handling for options with of SANE_TYPE_INT and SANE_TYPE FIXED + with CONSTRAINT_TYPE_NONE , uses spinbutton, no sliders + + - changed default medium definition of Slide from highlight=30% to highlight=40% + + - xsane_[back_gtk_]option_menu_new: added empty element to end of list + xsane_[back_gtk_]option_menu_lookup: test for existing element before comparision + + - moved media defintions from xsane.rc to xsane.mdf + + - preview: preset area: added definition name to context menu items + + - preview: add preset area: you can change the suggested name now + + - medium definitions: added same context menue like in preset area menu, + removed buttons "add medium" and "delete medium", they are in the + contect menu now + + - added documentation how to use a medium and how to define a medium + + - improved documentation how to edit the preset area definitions + + - in edit medium definition mode autmatic scanarea selection and automatic + color correction is disbaled + + - docs: replaced www.mostang.com/sane by www.sane-project.org + and sane-devel@mostang.com by sane-devel@lists.alioth.debian.org + + - batch_scan default list is loaded at program startup + + - added test for BUGGY_GDK_INPUT_EXECEPTION in xsane.c and xsane-preview.c + when gdk_input_add shall be used + + - changed order in xsane.h: system includes are moved to the beginning of + the file. This way it is possible to test for operating system header files + to decide how some #defines are made + + - added m4 makro test for msnative struct for windows + + - BUGGY_GDK_INPUT_EXCEPTION is defined for windows + + - src/Makefile.in: removed both "\" in + -DPATH_XSANE_DOC_DIR=\$(xsanedocdir) -DPATH_SANE_DATA_DIR=\$(sanedatadir) + + - created new xsane-WIN32-compilation.txt + + - for windows the GTK1 version of xsane_window_get_position is used + + - xsane_back_gtk_get_filename: directory is prepared with ending SLASH + instead of ending "/.", this does work with windows now when SLASH is \ + + +xsane-0.94 -> 0.95: +------------------- + + - For xsane-win32 the xsane icon is added to the windows ressource of xsane.exe: + added definition of XSANE_ICON=xsane-icon.opc to configure[.in] + added creation rule of xsane-icon.opc to src/Makefile[.in] + added @XSANE_ICON@ to XSANE_OBJS + + - in xsane_back_gtk_value_update: removed rounding (+ 0.5) in case SANE_TYPE_INT + + - changed menues in the xsane main dialog: + - added new menu "Window" + - moved Window menue entries form "View" to "Window" + - moved "Show resolution list" entry from menu "Preferences" to "View" + - moved "Update policy" entry from menu "Preferences" to "View" + - moved "Length unit" entry from menu "Preferences" to "View" + + - added test if resolution list is displayed or scale is displayed in + xsane_resolution_timer_callback(). Without this test it sometimes + happened that pressing CTRL+L (Swap show resolution list) caused a + segfault because the timer callback was executed in a moment where the + adjustment is not valid + + - added: if (???->window) + before each: gdk_window_process_updates(???->window) + in xsane-gamma.c, this made problems with gtk+2.x + + - when a postscript file is added to a faxproject then the original name of the + file is also used in the faxproject now. The pagecounter is still increased! + + - fax fine mode selection is stored in preferences now + + - handling of viewer filenames changed: + - when an image is saved in the viewer then the viewer shows the filename in + the window title and the viewer remembers the filename + - when the image has been changed after it has been saved then the filename + in the window title is shown in brackets + - when the filename ends with a number (counter) then the number is automatically + increased when the file is saved + - when a saved image is cloned then the suggested filename of the cloned image is + clone-of-"old-filename" + + - viewer: added support for different modification restrictions + - VIEWER_NO_MODIFICATION (only view) + - VIEWER_NO_NAME_AND_SIZE_MODIFICATION (some filters allowed but keep size, e.g. fax) + - VIEWER_NO_NAME_MODIFICATION (use given name, e.g. fax, mail) + - VIEWER_FULL_MODIFICATION (normal mode) + + - added undo function (1 step) to viewer + + - changed menues in the xsane viewer dialog: + - added menu "Edit" + - added menu "Geometry" + - moved Scale function from menu "File" to menu "Geometry" + - added rotation and mirror functions to menu "Geometry" + - added undo function to menu "Edit" + + - changed button boxes/icons in the xsane viewer dialog: + - added button boxes equal to menus: file, edit, filters, geometry + - added undo icon to edit box + - moved blur uand despeckle icon to filter box + - moved scale, rotation and mirrir icons to geometry box + + - replaced several "char buf[???];" by "char filename[PATH_MAX];" + + - changed fax mode: + - scanned images are stored in pnm format + - for each list entry there is a data and a type information now + - internal viewer is used now for pnm-fax files + - faxviewer is used for ps files + - before sending the fax pnm images are converted into ps images + - after sending the fax ps images are erased + + - changed e-mail mode: + - scanned images are stored in pnm format + - for each list entry there is a data and a type information now + - internal viewer is used now for pnm-mail files + - before sending the mail pnm images are converted into png images + - after sending the mail the png images are erased + - mail project status is translated now + - BUFIX: end of email text is marked with 0 byte + + - added function xsane_viewer_set_sensitivity() + - moved all gtk_widget_set_sensitive(GTK_WIDGET(v->button_box), TRUE/FALSE); to it + - added several gtk_widget_set_sensitive(???_menu, TRUE/FALSE); commands to it + - moved almost all v->block_actions to it + - now it should not be possible any more to crash xsane by closing the viewer + while it is saving something + + - added info "reduce to lineart" to image_info + xsane-pnm-header + + - renamed viewer v->reduce_to_lineart to v->allow_reduction_to_lineart + + - save_image_as() now automatically reduces lineart images to pbm before saving + + - new translations: hu + + - updated translations: de, es, ja, pt, pt_BR, sk + + +xsane-0.95 -> 0.96: +------------------- + + - fax progress bar does not change it's height any more when the fax dialog is resized + + - mail progress bar does not change it's height any more when the mail dialog is resized + + - added lockfile to mail project. The lockfile contains status and progress information + from the mail_send_process and is used to display a progress_bar + + - mail status is only translated when it is displayed via gtk, in the data structures + the untranslated texts are used + + - changed mail_attach_image_png to mail_attach_image, mime type is defined by parameter + + - added filetype menu to mail dialog with filetypes PNG, JPEG and TIFF + + - bugfix: viewer saves lineart PNM images again as lineart (bug in xsane-0.95) + + - when image is saved as pnm and it is not reduced to lineart then the input file + is copied with xsane_copy_file => much faster + + - xsane-save.c: reordered function parameters for saving/conversion functions to + (outfile, infile,...) or (output_filename, input_filename, ...) + (before we had sometimes infile at first and sometimes outfile at first) + + - xsane_set_sensitivity: mail_dialog and fax_dialog: + the sensitivity off all but the progress_bar is set + + - While mail is prepared (images are converted) the xsane sensitivity is set to + FALSE to make sure that the xsane mode is not changed in this case. + while sending the mail (after preparation) the xsane sensitivity is set to + TRUE and the project entry sensitivity is also TRUE, it is allowed to + changed xsane mode and to change the mailproject, because the + sending of the mail is done in a separate process, so there is no + influence by changing the mail project name. + + - Comment: + When xsane is closed while sending one or more mails then xsane is closed + but the mail sending subprocesses are not terminated. + + - added SMTP (HELO/FROM/RCPT/DATA) errors to mail status + + - added xsane.fax_status, it is saved in the first line of the xsane-fax-list + this means that the fax project directories are incompatible to earlier versions! + + - added mail_status and fax_status = ..._CHANGED when a new page is added to + the project + + - updated images in documentation + + - updated email modus in documentation + + - email images are named "image-1" instead of "page-1" + + - fax_dialog_delete() and mail_dialog_delete() return TRUE now. + In windows it was possible to delete the dialogs what caused + a crash when the window should be used or closed. + + - translations: U=updated, N=not updated + cs da de es fr hu it ja nl pt pt_BR ro ru sk sl sr sv tr vi zh + U U U U U N N U U U U U U N N N N U U N + + - xsane-preferences.c: when identifier is unknown or not a string then + the parser does not abort or crash any more. + XSane now should not have any problems with old config files. + + +xsane-0.96 -> 0.97: +------------------- + + - write_smtp_footer(): changed ".\r\n" by "\r\n.\r\n", this + solves problems with microsoft exchange servers. + + - translations: U=updated, N=not updated, A=added/new + cs da de es fr hu it ja nl pl pt pt_BR ro ru sk sl sr sv tr vi zh + N N N N N N U N N A N N N N N N N N N N U + + - xsane-save.c: xsane_copy_file(): removed fclose(infile) and fclose(outfile) + this bug caused the error "*** glibc detected *** double free or corruption (!prev): 0x........ ***" + with new gelibc versions + xsane-save.c: xsane_copy_file_by_name(): added fclose(infile) and fclose(outfile) + + - rmoved gtk_events_pending() from the waiting loop in xsane_back_gtk_get_filename, + it looks like gtk_events_pending() increases CPU load very much. + + - xsane-scan.c: function xsane_reduce_to_lineart(): corrected order of filenames in + xsane_save_image_as_lineart() + + - xsane_device_dialog(...): uses sane_control_option instead of xsane_control_option + to read option number 0. This means that it is not needed that SANE_CAP_SOFT_DETECT + is set for option number 0 + -- cgit v1.2.3