XSane-logo

Main window in save mode



Index


Main window:
Medium selection


Color correction:
Standard options window


Advanced options window


Preview:
Batch scan:
Setup:

In the save mode an image is scanned and saved to a file.


XSane-main-window


colormode    Scanmode:
Select scanmode, e.g.: color, grayscale, halftone, lineart.
scansource    Scansource:
Select scansource, e.g.: Flatbed, Transparency, Automatic Document Feeder.
medium    Medium selection:
Select scanmedium, e.g.: slide, standard negative, Agfa negative, ... or Full range.
resolution    Scan resolution:
Select resolution that is used for scanning. If the backends makes available a range of resolutions (e.g. 100-600 dpi) XSane can display a slider or a list of resolutions. You select this via Preferences/Show resolution list.
The backend can define a list of resolutions insted of a range, in this case it is not possible to enable the slider.

To select exact resolutions with the slider click the slider with the mouse pointer and use the cursor keys to change the value in steps of 1, if you press ctrl and a cursor key the step is 10.

disk    Select filename:
If you press the disk icon a browse dialog is opened where you can select the name of the image file that is created when the next scan is done. You also can enter the filename directly to the text box right to the disk icon. If no path is entered XSane saves the file into the directory selected in Preferences/Change directory.

Step:

If there is a counter in the filename (image-0001.jpg) the counter is increased by the number selected in this box.
Type:
by ext means that the filetype is selected by the extension of the filename. When you select a filetype in this box XSane automatically appends the correct extension to the filename, you should not append a file extension in this case.
Supported filetypes:
PDF, pnm and PostScript are always available. The other formats are only available if necessary libraries are present and support is compiled in. For png you need libpng and libz, for jpeg you need jpeglib, for tiff you need libtiff.
The supported output formats depend on the bit depth of the scanned image:

1 bit/pixel black/white mode:

pnm = pbm, png
ps, jpeg and tiff are converted to 8 bit grayscale mode.

8 bits/pixel grayscale mode:

pdf, pnm = pgm, png, ps, jpeg and tiff

16 bits/pixel grayscale mode (9-16 bits):

pnm=pgm, png and tiff

24 bits/pixel RGB-color mode (8 bits/color):

pdf, pnm = ppm, png, ps, jpeg and tiff

48 bits/pixel RGB-color mode (9-16 bits/color):

pnm, png and tiff
optional: (default: not compiled in)
32 bits/pixel RGBA-color mode (8 bits/color):
rgba (raw) and png with alpha channel
64 bits/pixel RGBA-color mode (9-16 bits/color):
rgba (raw) and png with alpha channel

Author: Oliver Rauch