diff options
Diffstat (limited to 'app/help/messages.in')
| -rw-r--r-- | app/help/messages.in | 244 |
1 files changed, 238 insertions, 6 deletions
diff --git a/app/help/messages.in b/app/help/messages.in index 519f2f8..f5bb62b 100644 --- a/app/help/messages.in +++ b/app/help/messages.in @@ -78,6 +78,16 @@ HELP The angle specified for a curve must be between 0\u00B0 and 360\u00B0. END +# ctodesgn.c +MESSAGE MSG_TODSGN_CORNU_TOO_COMPLEX +The curves created by the Turnout Designer for a cornu curve have more than 128 segments. +Try adjusting the end angles and radii to be closer in values. +HELP +Too complex a curve set to be used. Respecify \f{Turnout Designer} values. + +Refer to \k{cmdTurnoutNew} for detail. +END + # dcustmgm.c MESSAGE MSG_CUSTMGM_DELETE_CONFIRM Are you sure you want to delete the @@ -114,7 +124,7 @@ Cannot change elevation mode. HELP In the \f{Profile} command, the \f{Elevation} mode for this \e{endpoint} can be change only if it is \f{Defined}, \f{Ignored} or \f{None}. The \f{Elevation} command can be used to change this \e{endpoint}. -Refer to \k{cmdElev} for detail. +Refer to \k{cmdElevation} for detail. END # csnap.c @@ -160,6 +170,15 @@ The current \f{Layer} is where most new objects are created. It's not possible t Refer to \k{cmdLayer} for detail. END +# dlayer.c +MESSAGE MSG_LAYER_MODULE +Cannot turn current layer into a Module +HELP +The current \f{Layer} is where new objects are created. It's not possible to turn this layer into a module, since then the objects can't be chnaged or added. Change the current \f{Layer} to some other \f{Layer} before trying to make this Layer into a module. + +Refer to \k{cmdLayer} for detail. +END + # cjoin.c track.c:getTrackParams/PARAMS_..._JOIN MESSAGE MSG_JOIN_EASEMENTS Cannot Join; Easements do not align or abut. @@ -189,7 +208,7 @@ You cannot select a \f{Turntable} as the second track in \f{Join} command. If yo Refer to \k{cmdJoin} for detail. END - ccornu.c +# ccornu.c MESSAGE MSG_JOIN_CORNU_SAME Cannot Join; Selected endpoints are on same track. HELP @@ -376,6 +395,48 @@ necessary to upgrade your version of \e{XTrackCAD} to at least the version ident Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release. END +#fileio.c +MESSAGE MSG_LAYOUT_LINES_SKIPPED +While processing Layout file %s, %d lines were skipped because they were not recognized. +HELP +The layout file that you loaded contained records that were not recognized. This could be because the file was written by a higher level of \e{XTrackCAD} or because it was corrupted. + +Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release. +END + +#paramfile.c +MESSAGE MSG_PARAM_UPGRADE_VERSION1 +File version %ld is greater than supported +version %d. You need to upgrade %s +to at least version %s. +HELP +The parameter file that you're attempting to load was designed for a newer version +of \e{XTrackCAD}. In order to load this file it will be necessary to upgrade your version of \e{XTrackCAD} to at least the version identified within the error message. + +Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Website} and downloading the latest release. +END + +#paramfile.c +MESSAGE MSG_PARAM_UPGRADE_VERSION2 +File version %ld is greater than supported +version %d. You need to upgrade your +version of %s +HELP +The parameter file that you're attempting to load was designed for a newer version of \e{XTrackCAD}. In order to load this file it will be +necessary to upgrade your version of \e{XTrackCAD} to at least the version identified within the error message. + +Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release. +END + +#paramfile.c +MESSAGE MSG_PARAM_LINES_SKIPPED +While processing Parameter file %s, %d lines were skipped because they were not recognized. +HELP +The parameter file that you loaded contained records that were not recognized. This could be because the file was designed for a higher level of \e{XTrackCAD} or because it was corrupted. + +Take full advantage of the latest features within \e{XTrackCAD} by visiting the \W{http://www.xtrkcad.org/}{\e{XTrackCAD} Fork Website} and downloading the latest release. +END + # chndldto.c MESSAGE MSG_MOVE_POINTS_OTHER_SIDE Frog angle prevents placement of points. Move points to opposite side of frog. @@ -404,6 +465,16 @@ You are connecting two \e{endpoints} which differ in heights by N.NNN. The eleva END # cselect.c:cmdMoveDescription +MESSAGE MSG_TRK_DESC_NOT_VISIBLE +Label description is hidden +HELP +The \f{Move Description} command can only be used when labels are visible on the layout. Labels can be hidden using the Context Menu. + +Use the Context Menu to toggle a track's visbility on and off. + +END + +# cselect.c:cmdMoveDescription MESSAGE MSG_DESC_NOT_VISIBLE Label descriptions not visible HELP @@ -439,6 +510,13 @@ Values for \f{Page Width} and \f{Height} can be manually entered thus overriding Refer to \k{cmdPrint} for detail. END +MESSAGE MSG_NO_PRINTER_SELECTED +Please select a printer from the Print Setup dialog. +HELP +Printer Margins are specific to the selected printer, but no selected printer is chosen. +You can select a printer from the Print Setup dialog. +END + # dprmfile.c MESSAGE MSG_PRMFIL_NO_CONTENTS New Parameter File has no CONTENTS line: %s @@ -518,6 +596,13 @@ The current command operates on \f{Select}ed tracks of which there are none. \f{ Refer to \k{cmdSelect} for detail. END +# dlayer.c +MESSAGE MSG_NO_EMPTY_LAYER +No layer was found that has no contents, so the module can not be imported +HELP +The import module function needs an empty layer to work with, but none could be found. Clear a layer and retry. +END + # dcmpnd.c:refreshCompound MESSAGE MSG_NO_TURNOUTS_AVAILABLE No %s are available. @@ -551,9 +636,9 @@ END # cparalle.c MESSAGE MSG_PARALLEL_SEP_GTR_0 -Parallel separation must be greater than 0. +Parallel separation must be greater than 0, or the new guage must be different than the old. HELP -A parallel track with a separation of 0 or less cannot be created. Specify a positive value in the \f{Separation} field that appears in the Status Bar. +A parallel track with an identical gauge and separation of 0 or less cannot be created. Specify a positive value in the \f{Separation} field that appears in the Status Bar, or select a track with a different guage. Refer to \k{cmdParallel} for detail. END @@ -617,7 +702,14 @@ END MESSAGE MSG_POLY_SHAPES_3_SIDES Poly shapes must have at least 3 sides. HELP -Polygons and Poly Lines must have at least 3 sides. By moving one of the corners close to another corner you're attempting to merge the corners and create a Poly shape with only 2 sides. Try moving the other corner to the new position first. +Polygons and Poly Lines must have at least 3 sides. You're attempting to create a Poly shape with only 2 sides by deleting the third. +END + +# drawgeom.c +MESSAGE MSG_POLY_MULTIPLE_SELECTED +Can't delete multiple points at once +HELP +Polygons and Poly Lines points can only be deleted one at a time. END # dcar.c @@ -928,6 +1020,15 @@ This operation cannot be executed as the selected track is present on a frozen l Refer to \k{cmdLayer} for detail. END +# track.c +MESSAGE MSG_CANT_MODIFY_MODULE_TRK +Tracks in a module cannot be modified. +HELP +This operation cannot be executed as the selected track is present in a module layer. Track modifications may be performed only on unfrozen, non-module layers. + +Refer to \k{cmdLayer} for detail. +END + #ctodesgn.c MESSAGE MSG_SEGMENTS_DIFFER Turnout definition contains non-track segments. @@ -1015,6 +1116,132 @@ Cannot open %s file: #NOHELP END +# fileio.c +MESSAGE MSG_DIR_CREATE_FAIL +Cannot create directory: %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_DIR_OPEN_FAIL +Cannot open directory: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_NOT_DIR_FAIL +Path for deletion is not a directory: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_OPEN_DIR_FAIL +Open failed for directory: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_DIR_ADD_FAIL +Can't add directory record %s to zip - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_FILE_ADD_FAIL +Can't add file record %s to zip at %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_CREATE_FAIL +Can't create zip %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_CLOSE_FAIL +Close failure for zip %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_RENAME_FAIL +Rename failure for zip from %s to %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_OPEN_FAIL +Open failure for zip %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_INDEX_FAIL +Index failure for zip %s - %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_FILE_OPEN_FAIL +Open read file failure %s %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ZIP_READ_FAIL +Open file in zip failure %s %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_UNLINK_FAIL +Unlink failed for: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_RMDIR_FAIL +Remove Directory failed for: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_ARCHIVE_FAIL +Cannot save archive to %s from directory: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_MANIFEST_FAIL +Cannot save manifest file to %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_MANIFEST_OPEN_FAIL +Cannot open manifest file %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_UNPACK_FAIL +Cannot unpack file: %s for file: %s in directory: %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_COPY_OPEN_FAIL +Cannot open file %s +#NOHELP +END + +# fileio.c +MESSAGE MSG_COPY_FAIL +Cannot copy file %s into directory %s +#NOHELP +END + # various MESSAGE MSG_BAD_OPTION Unrecognized Option: %s @@ -1208,7 +1435,12 @@ layout file using an older version of %s #NOHELP END - +# paramfile.c +MESSAGE MSG_PARAM_BAD_FILE_VERSION +File version %ld is lower than the minimum +supported version %d.This parameter file will only work using an older version of %s +#NOHELP +END # macro.c MESSAGE MSG_CANT_READ_DEMO |