summaryrefslogtreecommitdiff
path: root/jpeg/jmemdosa.asm
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2015-05-01 16:13:57 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2015-05-01 16:13:57 +0200
commit094535c010320967639e8e86f974d878e80baa72 (patch)
treeefc3094b20355dcbeebb2c4ece4fcfc69bffedb5 /jpeg/jmemdosa.asm
parentc07d0c2d2f6f7b0eb6e92cc6204bf05037957e82 (diff)
Imported Upstream version 1.7.0upstream/1.7.0
Diffstat (limited to 'jpeg/jmemdosa.asm')
-rw-r--r--jpeg/jmemdosa.asm379
1 files changed, 379 insertions, 0 deletions
diff --git a/jpeg/jmemdosa.asm b/jpeg/jmemdosa.asm
new file mode 100644
index 0000000..ecd4372
--- /dev/null
+++ b/jpeg/jmemdosa.asm
@@ -0,0 +1,379 @@
+;
+; jmemdosa.asm
+;
+; Copyright (C) 1992, Thomas G. Lane.
+; This file is part of the Independent JPEG Group's software.
+; For conditions of distribution and use, see the accompanying README file.
+;
+; This file contains low-level interface routines to support the MS-DOS
+; backing store manager (jmemdos.c). Routines are provided to access disk
+; files through direct DOS calls, and to access XMS and EMS drivers.
+;
+; This file should assemble with Microsoft's MASM or any compatible
+; assembler (including Borland's Turbo Assembler). If you haven't got
+; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
+;
+; To minimize dependence on the C compiler's register usage conventions,
+; we save and restore all 8086 registers, even though most compilers only
+; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return
+; values, which everybody returns in AX.
+;
+; Based on code contributed by Ge' Weijers.
+;
+
+JMEMDOSA_TXT segment byte public 'CODE'
+
+ assume cs:JMEMDOSA_TXT
+
+ public _jdos_open
+ public _jdos_close
+ public _jdos_seek
+ public _jdos_read
+ public _jdos_write
+ public _jxms_getdriver
+ public _jxms_calldriver
+ public _jems_available
+ public _jems_calldriver
+
+;
+; short far jdos_open (short far * handle, char far * filename)
+;
+; Create and open a temporary file
+;
+_jdos_open proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov cx,0 ; normal file attributes
+ lds dx,dword ptr [bp+10] ; get filename pointer
+ mov ah,3ch ; create file
+ int 21h
+ jc open_err ; if failed, return error code
+ lds bx,dword ptr [bp+6] ; get handle pointer
+ mov word ptr [bx],ax ; save the handle
+ xor ax,ax ; return zero for OK
+open_err: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jdos_open endp
+
+
+;
+; short far jdos_close (short handle)
+;
+; Close the file handle
+;
+_jdos_close proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov bx,word ptr [bp+6] ; file handle
+ mov ah,3eh ; close file
+ int 21h
+ jc close_err ; if failed, return error code
+ xor ax,ax ; return zero for OK
+close_err: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jdos_close endp
+
+
+;
+; short far jdos_seek (short handle, long offset)
+;
+; Set file position
+;
+_jdos_seek proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov bx,word ptr [bp+6] ; file handle
+ mov dx,word ptr [bp+8] ; LS offset
+ mov cx,word ptr [bp+10] ; MS offset
+ mov ax,4200h ; absolute seek
+ int 21h
+ jc seek_err ; if failed, return error code
+ xor ax,ax ; return zero for OK
+seek_err: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jdos_seek endp
+
+
+;
+; short far jdos_read (short handle, void far * buffer, unsigned short count)
+;
+; Read from file
+;
+_jdos_read proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov bx,word ptr [bp+6] ; file handle
+ lds dx,dword ptr [bp+8] ; buffer address
+ mov cx,word ptr [bp+12] ; number of bytes
+ mov ah,3fh ; read file
+ int 21h
+ jc read_err ; if failed, return error code
+ cmp ax,word ptr [bp+12] ; make sure all bytes were read
+ je read_ok
+ mov ax,1 ; else return 1 for not OK
+ jmp short read_err
+read_ok: xor ax,ax ; return zero for OK
+read_err: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jdos_read endp
+
+
+;
+; short far jdos_write (short handle, void far * buffer, unsigned short count)
+;
+; Write to file
+;
+_jdos_write proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov bx,word ptr [bp+6] ; file handle
+ lds dx,dword ptr [bp+8] ; buffer address
+ mov cx,word ptr [bp+12] ; number of bytes
+ mov ah,40h ; write file
+ int 21h
+ jc write_err ; if failed, return error code
+ cmp ax,word ptr [bp+12] ; make sure all bytes written
+ je write_ok
+ mov ax,1 ; else return 1 for not OK
+ jmp short write_err
+write_ok: xor ax,ax ; return zero for OK
+write_err: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jdos_write endp
+
+
+;
+; void far jxms_getdriver (XMSDRIVER far *)
+;
+; Get the address of the XMS driver, or NULL if not available
+;
+_jxms_getdriver proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov ax,4300h ; call multiplex interrupt with
+ int 2fh ; a magic cookie, hex 4300
+ cmp al,80h ; AL should contain hex 80
+ je xmsavail
+ xor dx,dx ; no XMS driver available
+ xor ax,ax ; return a nil pointer
+ jmp short xmsavail_done
+xmsavail: mov ax,4310h ; fetch driver address with
+ int 2fh ; another magic cookie
+ mov dx,es ; copy address to dx:ax
+ mov ax,bx
+xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value
+ mov word ptr es:[bx],ax
+ mov word ptr es:[bx+2],dx
+ pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jxms_getdriver endp
+
+
+;
+; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
+;
+; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the XMS call is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jxms_calldriver proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ les bx,dword ptr [bp+10] ; get XMScontext pointer
+ mov ax,word ptr es:[bx] ; load registers
+ mov dx,word ptr es:[bx+2]
+ mov si,word ptr es:[bx+6]
+ mov ds,word ptr es:[bx+8]
+ mov bx,word ptr es:[bx+4]
+ call dword ptr [bp+6] ; call the driver
+ mov cx,bx ; save returned BX for a sec
+ les bx,dword ptr [bp+10] ; get XMScontext pointer
+ mov word ptr es:[bx],ax ; put back ax,dx,bx
+ mov word ptr es:[bx+2],dx
+ mov word ptr es:[bx+4],cx
+ pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jxms_calldriver endp
+
+
+;
+; short far jems_available (void)
+;
+; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
+;
+_jems_available proc far
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ mov ax,3567h ; get interrupt vector 67h
+ int 21h
+ push cs
+ pop ds
+ mov di,000ah ; check offs 10 in returned seg
+ lea si,ASCII_device_name ; against literal string
+ mov cx,8
+ cld
+ repe cmpsb
+ jne no_ems
+ mov ax,1 ; match, it's there
+ jmp short avail_done
+no_ems: xor ax,ax ; it's not there
+avail_done: pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ ret
+
+ASCII_device_name db "EMMXXXX0"
+
+_jems_available endp
+
+
+;
+; void far jems_calldriver (EMScontext far *)
+;
+; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the EMS trap is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jems_calldriver proc far
+ push bp ; linkage
+ mov bp,sp
+ push si ; save all registers for safety
+ push di
+ push bx
+ push cx
+ push dx
+ push es
+ push ds
+ les bx,dword ptr [bp+6] ; get EMScontext pointer
+ mov ax,word ptr es:[bx] ; load registers
+ mov dx,word ptr es:[bx+2]
+ mov si,word ptr es:[bx+6]
+ mov ds,word ptr es:[bx+8]
+ mov bx,word ptr es:[bx+4]
+ int 67h ; call the EMS driver
+ mov cx,bx ; save returned BX for a sec
+ les bx,dword ptr [bp+6] ; get EMScontext pointer
+ mov word ptr es:[bx],ax ; put back ax,dx,bx
+ mov word ptr es:[bx+2],dx
+ mov word ptr es:[bx+4],cx
+ pop ds ; restore registers and exit
+ pop es
+ pop dx
+ pop cx
+ pop bx
+ pop di
+ pop si
+ pop bp
+ ret
+_jems_calldriver endp
+
+JMEMDOSA_TXT ends
+
+ end