summaryrefslogtreecommitdiff
path: root/png/INSTALL
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2015-05-02 10:09:28 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2015-05-02 10:09:28 +0200
commitda4a717ddcd6ba5b5b0819aabbe49fcd5f77ae4d (patch)
tree86a75831be5de12584225fdd94bec47a73a455a8 /png/INSTALL
parent63128e407a6ee7afd31e013dc55d5dcbfab0f6a9 (diff)
remove unused sources
Diffstat (limited to 'png/INSTALL')
-rw-r--r--png/INSTALL369
1 files changed, 0 insertions, 369 deletions
diff --git a/png/INSTALL b/png/INSTALL
deleted file mode 100644
index b645491..0000000
--- a/png/INSTALL
+++ /dev/null
@@ -1,369 +0,0 @@
-
-Installing libpng
-
-Contents
-
- I. Simple installation
- II. Rebuilding the configure scripts
- III. Using scripts/makefile*
- IV. Using cmake
- V. Directory structure
- VI. Building with project files
- VII. Building with makefiles
-VIII. Configuring libpng for 16-bit platforms
- IX. Configuring for DOS
- X. Configuring for Medium Model
- XI. Prepending a prefix to exported symbols
- XII. Configuring for compiler xxx:
-XIII. Removing unwanted object code
- XIV. Changes to the build and configuration of libpng in libpng-1.5.x
- XV. Configuring libpng for multiprocessing
- XVI. Other sources of information about libpng:
-
-I. Simple installation
-
-On Unix/Linux and similar systems, you can simply type
-
- ./configure [--prefix=/path]
- make check
- make install
-
-and ignore the rest of this document.
-
-II. Rebuilding the configure scripts
-
-If configure does not work on your system, or if you have a need to
-change configure.ac or Makefile.am, and you have a reasonably
-up-to-date set of tools, running ./autogen.sh in a git clone before
-running ./configure may fix the problem. To be really sure that you
-aren't using any of the included pre-built scripts, you can do this:
-
- ./configure --enable-maintainer-mode
- make maintainer-clean
- ./autogen.sh --maintainer --clean
- ./autogen.sh --maintainer
- ./configure [--prefix=/path] [other options]
- make
- make install
- make check
-
-III. Using scripts/makefile*
-
-Instead, you can use one of the custom-built makefiles in the
-"scripts" directory
-
- cp scripts/pnglibconf.h.prebuilt pnglibconf.h
- cp scripts/makefile.system makefile
- make test
- make install
-
-The files that are presently available in the scripts directory
-are listed and described in scripts/README.txt.
-
-Or you can use one of the "projects" in the "projects" directory.
-
-Before installing libpng, you must first install zlib, if it
-is not already on your system. zlib can usually be found
-wherever you got libpng. zlib can be placed in another directory,
-at the same level as libpng.
-
-If your system already has a preinstalled zlib you will still need
-to have access to the zlib.h and zconf.h include files that
-correspond to the version of zlib that's installed.
-
-If you wish to test with a particular zlib that is not first in the
-standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS,
-and LD_LIBRARY_PATH in your environment before running "make test"
-or "make distcheck":
-
-ZLIBLIB=/path/to/lib export ZLIBLIB
-ZLIBINC=/path/to/include export ZLIBINC
-CPPFLAGS="-I$ZLIBINC" export CPPFLAGS
-LDFLAGS="-L$ZLIBLIB" export LDFLAGS
-LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH
-
-If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC
-in your environment and type "make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test".
-
-IV. Using cmake
-
-If you want to use "cmake" (see www.cmake.org), type
-
- cmake . -DCMAKE_INSTALL_PREFIX=/path
- make
- make install
-
-V. Directory structure
-
-You can rename the directories that you downloaded (they
-might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.8"
-or "zlib128") so that you have directories called "zlib" and "libpng".
-
-Your directory structure should look like this:
-
- .. (the parent directory)
- libpng (this directory)
- INSTALL (this file)
- README
- *.h
- *.c
- CMakeLists.txt => "cmake" script
- configuration files:
- configure.ac, configure, Makefile.am, Makefile.in,
- autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in,
- libpng-config.in, aclocal.m4, config.h.in, config.sub,
- depcomp, install-sh, mkinstalldirs, test-pngtest.sh
- contrib
- gregbook
- libtests
- pngminim
- pngminus
- pngsuite
- visupng
- projects
- visualc71
- vstudio
- scripts
- makefile.*
- *.def (module definition files)
- etc.
- pngtest.png
- etc.
- zlib
- README
- *.h
- *.c
- contrib
- etc.
-
-If the line endings in the files look funny, you may wish to get the other
-distribution of libpng. It is available in both tar.gz (UNIX style line
-endings) and zip (DOS style line endings) formats.
-
-VI. Building with project files
-
-If you are building libpng with MSVC, you can enter the
-libpng projects\visualc6 or visualc71 directory and follow the instructions
-in README.txt.
-
-Otherwise enter the zlib directory and follow the instructions in zlib/README,
-then come back here and run "configure" or choose the appropriate
-makefile.sys in the scripts directory.
-
-VII. Building with makefiles
-
-Copy the file (or files) that you need from the
-scripts directory into this directory, for example
-
- MSDOS example: copy scripts\makefile.msc makefile
- copy scripts\pnglibconf.h.prebuilt pnglibconf.h
- UNIX example: cp scripts/makefile.std makefile
- cp scripts/pnglibconf.h.prebuilt pnglibconf.h
-
-Read the makefile to see if you need to change any source or
-target directories to match your preferences.
-
-Then read pnglibconf.dfa to see if you want to make any configuration
-changes.
-
-Then just run "make" which will create the libpng library in
-this directory and "make test" which will run a quick test that reads
-the "pngtest.png" file and writes a "pngout.png" file that should be
-identical to it. Look for "9782 zero samples" in the output of the
-test. For more confidence, you can run another test by typing
-"pngtest pngnow.png" and looking for "289 zero samples" in the output.
-Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare
-your output with the result shown in contrib/pngsuite/README.
-
-Most of the makefiles will allow you to run "make install" to
-put the library in its final resting place (if you want to
-do that, run "make install" in the zlib directory first if necessary).
-Some also allow you to run "make test-installed" after you have
-run "make install".
-
-VIII. Configuring libpng for 16-bit platforms
-
-You will want to look into zconf.h to tell zlib (and thus libpng) that
-it cannot allocate more then 64K at a time. Even if you can, the memory
-won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K.
-
-IX. Configuring for DOS
-
-For DOS users who only have access to the lower 640K, you will
-have to limit zlib's memory usage via a png_set_compression_mem_level()
-call. See zlib.h or zconf.h in the zlib library for more information.
-
-X. Configuring for Medium Model
-
-Libpng's support for medium model has been tested on most of the popular
-compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets
-defined, and FAR gets defined to far in pngconf.h, and you should be
-all set. Everything in the library (except for zlib's structure) is
-expecting far data. You must use the typedefs with the p or pp on
-the end for pointers (or at least look at them and be careful). Make
-note that the rows of data are defined as png_bytepp, which is
-an "unsigned char far * far *".
-
-XI. Prepending a prefix to exported symbols
-
-Starting with libpng-1.6.0, you can configure libpng (when using the
-"configure" script) to prefix all exported symbols by means of the
-configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any
-string beginning with a letter and containing only uppercase
-and lowercase letters, digits, and the underscore (i.e., a C language
-identifier). This creates a set of macros in pnglibconf.h, so this is
-transparent to applications; their function calls get transformed by
-the macros to use the modified names.
-
-XII. Configuring for compiler xxx:
-
-All includes for libpng are in pngconf.h. If you need to add, change
-or delete an include, this is the place to do it.
-The includes that are not needed outside libpng are placed in pngpriv.h,
-which is only used by the routines inside libpng itself.
-The files in libpng proper only include pngpriv.h and png.h, which
-in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h.
-As of libpng-1.5.0, pngpriv.h also includes three other private header
-files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material
-that previously appeared in the public headers.
-
-XIII. Removing unwanted object code
-
-There are a bunch of #define's in pngconf.h that control what parts of
-libpng are compiled. All the defines end in _SUPPORTED. If you are
-never going to use a capability, you can change the #define to #undef
-before recompiling libpng and save yourself code and data space, or
-you can turn off individual capabilities with defines that begin with
-PNG_NO_.
-
-In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead.
-
-You can also turn all of the transforms and ancillary chunk capabilities
-off en masse with compiler directives that define
-PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS,
-or all four, along with directives to turn on any of the capabilities that
-you do want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the
-extra transformations but still leave the library fully capable of reading
-and writing PNG files with all known public chunks. Use of the
-PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library
-that is incapable of reading or writing ancillary chunks. If you are
-not using the progressive reading capability, you can turn that off
-with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING
-capability, which you'll still have).
-
-All the reading and writing specific code are in separate files, so the
-linker should only grab the files it needs. However, if you want to
-make sure, or if you are building a stand alone library, all the
-reading files start with "pngr" and all the writing files start with "pngw".
-The files that don't match either (like png.c, pngtrans.c, etc.)
-are used for both reading and writing, and always need to be included.
-The progressive reader is in pngpread.c
-
-If you are creating or distributing a dynamically linked library (a .so
-or DLL file), you should not remove or disable any parts of the library,
-as this will cause applications linked with different versions of the
-library to fail if they call functions not available in your library.
-The size of the library itself should not be an issue, because only
-those sections that are actually used will be loaded into memory.
-
-XIV. Changes to the build and configuration of libpng in libpng-1.5.x
-
-Details of internal changes to the library code can be found in the CHANGES
-file and in the GIT repository logs. These will be of no concern to the vast
-majority of library users or builders; however, the few who configure libpng
-to a non-default feature set may need to change how this is done.
-
-There should be no need for library builders to alter build scripts if
-these use the distributed build support - configure or the makefiles -
-however, users of the makefiles may care to update their build scripts
-to build pnglibconf.h where the corresponding makefile does not do so.
-
-Building libpng with a non-default configuration has changed completely.
-The old method using pngusr.h should still work correctly even though the
-way pngusr.h is used in the build has been changed; however, library
-builders will probably want to examine the changes to take advantage of
-new capabilities and to simplify their build system.
-
-A. Specific changes to library configuration capabilities
-
-The exact mechanism used to control attributes of API functions has
-changed. A single set of operating system independent macro definitions
-is used and operating system specific directives are defined in
-pnglibconf.h
-
-As part of this the mechanism used to choose procedure call standards on
-those systems that allow a choice has been changed. At present this only
-affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems
-running on Intel processors. As before, PNGAPI is defined where required
-to control the exported API functions; however, two new macros, PNGCBAPI
-and PNGCAPI, are used instead for callback functions (PNGCBAPI) and
-(PNGCAPI) for functions that must match a C library prototype (currently
-only png_longjmp_ptr, which must match the C longjmp function.) The new
-approach is documented in pngconf.h
-
-Despite these changes, libpng 1.5.0 only supports the native C function
-calling standard on those platforms tested so far (__cdecl on Microsoft
-Windows). This is because the support requirements for alternative
-calling conventions seem to no longer exist. Developers who find it
-necessary to set PNG_API_RULE to 1 should advise the mailing list
-(png-mng-implement) of this and library builders who use Openwatcom and
-therefore set PNG_API_RULE to 2 should also contact the mailing list.
-
-B. Changes to the configuration mechanism
-
-Prior to libpng-1.5.0 library builders who needed to configure libpng
-had either to modify the exported pngconf.h header file to add system
-specific configuration or had to write feature selection macros into
-pngusr.h and cause this to be included into pngconf.h by defining
-PNG_USER_CONFIG. The latter mechanism had the disadvantage that an
-application built without PNG_USER_CONFIG defined would see the
-unmodified, default, libpng API and thus would probably fail to link.
-
-These mechanisms still work in the configure build and in any makefile
-build that builds pnglibconf.h, although the feature selection macros
-have changed somewhat as described above. In 1.5.0, however, pngusr.h is
-processed only once, when the exported header file pnglibconf.h is built.
-pngconf.h no longer includes pngusr.h, therefore pngusr.h is ignored after the
-build of pnglibconf.h and it is never included in an application build.
-
-The rarely used alternative of adding a list of feature macros to the
-CPPFLAGS setting in the build also still works; however, the macros will be
-copied to pnglibconf.h and this may produce macro redefinition warnings
-when the individual C files are compiled.
-
-All configuration now only works if pnglibconf.h is built from
-scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan
-(the original author of awk) maintains C source code of that awk and this
-and all known later implementations (often called by subtly different
-names - nawk and gawk for example) are adequate to build pnglibconf.h.
-The Sun Microsystems (now Oracle) program 'awk' is an earlier version
-and does not work; this may also apply to other systems that have a
-functioning awk called 'nawk'.
-
-Configuration options are now documented in scripts/pnglibconf.dfa. This
-file also includes dependency information that ensures a configuration is
-consistent; that is, if a feature is switched off dependent features are
-also removed. As a recommended alternative to using feature macros in
-pngusr.h a system builder may also define equivalent options in pngusr.dfa
-(or, indeed, any file) and add that to the configuration by setting
-DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate
-how to do this, and a case where pngusr.h is still required.
-
-XV. Configuring libpng for multiprocessing
-
-Libpng uses setjmp()/longjmp() for error handling. Unfortunately setjmp()
-is known to be not thread-safe on some platforms and we don't know of
-any platform where it is guaranteed to be thread-safe. Therefore, if
-your application is going to be using multiple threads, you should
-configure libpng with PNG_NO_SETJMP in your pngusr.dfa file, with
--DPNG_NO_SETJMP on your compile line, or with
-
- #undef PNG_SETJMP_SUPPORTED
-
-in your pnglibconf.h or pngusr.h.
-
-XVI. Other sources of information about libpng:
-
-Further information can be found in the README and libpng-manual.txt
-files, in the individual makefiles, in png.h, and the manual pages
-libpng.3 and png.5.