New maintainerdebian/1.8.14-3

25 files changed, 1006 insertions, 213 deletions

diff --git a/debian/changelog b/debian/changelog
index 449d067..bd824c2 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,60 +1,290 @@
-version (1.8.11) unstable; urgency=low
-  * Fix new GCC compilation issues in regards to Packing
-  * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded
-       for 2.4 kernel instead of ipmi_si_drv driver module
-  * New -y option added to allow specification of kg keys with
-       non-printable characters
-  * New -K option added to allow kgkey settings via environmental
-       variable IPMI_KGKEY
-  * Generic device support added for EEPROM with SDR Type 10h (gendev)
-  * Fix to lan-bridging for a double-bridging crash and to fix
-       an issue with bridging multiple concurrent requests and
-       erroneous handling of raw Send Message
-  * Lanplus fix for commands like 'sensor list' without the -t option
-       causing wrong double bridged requests of a sensor is located
-       on another satellite controller
-  * Fix lan and lanplus request list entry removal bugs
-  * Fix non-working issue when trying to send a bridge message with
-       Cipher 3
-  * Change bridge message handling to reuse command ipmi_lan_poll_recv
-  * Added PICMG 2.0 and 2.3 support
-  * Fix PICMG (ATCA) extension verification and reversal of BCD encoded
-       values for "major" and "minor" fields
-  * Add IANA support for Pigeon Point
-  * Add OEM SW/FW Record identification
-  * Fix to include I2C and LUN addresses so sensors are correctly managed
-  * Patch ID 1990560 to get readings from non-linear analog sensors
-  * Add support for SOL payload status command
-  * SOL set parameter range checking added
-  * Fixed SOL activate options usage 
-  * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967)
-  * Added retries to SOL keepalive
-  * Fixed wrong mask values for Front Panel disable/enable status
-  * Add support to access fru internal use area
-  * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow
-       blocks of data within the FRU storage area to be write
-       protected.
-  * Fix node reporting in GUID; Tracker bug #2339675
-  * Fix watchdog use/action print strings
-  * Fix endian bug in SDR add from file; Tracker bug #2075258
-  * Fix crash when dumping SDRs in a file and there's an error
-       getting an SDR; improve algorithm for optimal packet size
-  * Fix occasional SDR dump segfault; #1793076
-  * Allow ipmitool sel delete to accept hex list entry numbers
-  * Fix SEL total space reporting.
-  * Fix for garbage sensor threshold values reported when none 
-       returned.  Tracker Bug #863748
-  * ipmievd change to Monitor %used in SEL buffer and log warnings when
-       the buffer is 80% and 100% full
-
- -- Petter Reinholdtsen <pere@debian.org>  Wed, 25 Feb 2009 09:44:31 +0200
-
-ipmitool (1.8.10) unstable; urgency=low
+ipmitool (1.8.14-3) unstable; urgency=medium
 
-  * New upstream version.
-  * Patch to allow Debian package builds from cvs.
+  * move ipmitool.conf 
+     from /etc/modules-load.d
+     to /usr/lib/modules-load.d ( Closes: #753762 )
+
+ -- Jörg Frings-Fürst <debian@jff-webhosting.net>  Mon, 02 Jun 2014 20:46:28 +0200
+
+ipmitool (1.8.14-2) unstable; urgency=medium
+  
+  * patch 115-lib_declarations.patch 
+     - lib/kontronoem.c
+       correct declaration of write_fru_area ( Closes: #749913 )
+  * remove hardening-wrapper from build-Depends
+  * add ipmi* kernel-modules to startup-script
+     ( LP: #908112 )
+  * add debian/systemd/ipmitool.conf to load 
+     ipmi* kernel-modules under systemd
+  * add debian/source/option
+     compression xy / level 9
+
+  [ Gerald Turner <gturner@unzane.com> ]
+  * changes on systemd startup scripts ( Closes: #750003 )
+
+ -- Jörg Frings-Fürst <debian@jff-webhosting.net>  Tue, 27 May 2014 14:53:55 +0200
+
+ipmitool (1.8.14-1) unstable; urgency=medium
+
+  * remove debian/README.debian
+  * remove debian/dirs
+  * add debian/ipmitool.ipmievd.default
+    - default ipmievd start is disabled
+  * add patch 
+    - 096-manpage_longlines.patch
+    - 097-source_typo.patch
+    - 098-manpage_typo.patch 
+      - fix "tiny misprint" ( Closes: #554348 )
+  * add systemd
+  * rewrite debian/copyright
+  * add debian/source/format
+  * debian/control
+    - add homepage ( Closes: #744283 )
+    - bump Standards-Version to 3.9.5
+    - remove unused Build-Depends
+      - quilt
+  * change to upstream version 1.8.14
+    - fix FTBFS on kfreebsd ( Closes: #725476 )
+  * Bumps compat to 9
+  * New maintainer ( Closes: #748487 )
+
+ -- Jörg Frings-Fürst <debian@jff-webhosting.net>  Sun, 18 May 2014 17:40:37 +0200
+
+ipmitool (1.8.13-1) unstable; urgency=low
+
+  * New upstream release
+    - Fixes regression in default cipher suite selection (Closes: #708621).
+
+ -- Luk Claes <luk@debian.org>  Wed, 18 Sep 2013 07:45:10 +0200
+
+ipmitool (1.8.12-1) unstable; urgency=low
+
+  * Merge new upstream from Ubuntu (Closes: #692292).
+
+ -- Luk Claes <luk@debian.org>  Tue, 07 May 2013 18:12:12 +0200
+
+ipmitool (1.8.12-0ubuntu2) raring; urgency=low
+
+  * debian/patches/big_endian: cherry-pick missing includes from upstream;
+    fixes FTBFS on powerpc.
+
+ -- Robie Basak <robie.basak@canonical.com>  Tue, 05 Mar 2013 13:38:42 +0000
+
+ipmitool (1.8.12-0ubuntu1) raring; urgency=low
+
+  * New upstream release (LP: #1074443):
+    - Dropped patches:
+      + fix_sdr_segfault: ipmi_sdr_print_sensor_compact no longer
+        exists upstream.
+      + dell_*: merged upstream.
+
+ -- Robie Basak <robie.basak@canonical.com>  Mon, 04 Mar 2013 12:13:46 +0000
+
+ipmitool (1.8.11-5ubuntu1) precise; urgency=low
+
+  * Merge from Debian testing (LP: #914920).  Remaining changes:
+    - debian/contol:
+      + Changed openipmi from Suggests to Recommends
+    - debian/copyright:
+      + Add DELL copyright notice.
+    - Apply a series of 6 patches from upstream's patch tracker to
+      add DELL specific commands (delloem)
+  * Drop changes:
+    - Add armel/armhf support, now Architecture is any
+    - 101_fix_buf_overflow.patch now in debian
+
+ -- Leo Iannacone <l3on@ubuntu.com>  Wed, 11 Jan 2012 18:49:15 +0100
+
+ipmitool (1.8.11-5) unstable; urgency=high
+
+  * debian/control: Add libncurses-dev build dependency
+  * Don't set umask to fix CVE-2011-4339 (Closes: #651917).
+
+ -- Luk Claes <luk@debian.org>  Wed, 28 Dec 2011 12:34:15 +0100
+
+ipmitool (1.8.11-4) unstable; urgency=low
+
+  * debian/control:
+    - Add ${misc:Depends} so deps can be added by debhelper.
+  * debian/README.source: Add reference to quilt docs.
+  * debian/ipmitool.ipmievd.init: 
+    - Test if /etc/default/rcS exists, before executing it.
+    - Add status support (Closes: #536119).
+  * debian/ipmitool.{post,pre}{inst,rm}: Add -e.
+  * Fix buffer overflow in tsol session.
+  * Update Vcs-Browser as URL mentioned within Alioth's gitweb 
+    interface does not work.
+
+ -- Luk Claes <luk@debian.org>  Thu, 22 Sep 2011 07:49:10 +0200
+
+ipmitool (1.8.11-3) unstable; urgency=high
+
+  * debian/control: 
+    - Add myself as co-maintainer.
+    - Add Vcs entries.
+    - Update Architecture to any as ipmitool can be used for 
+      remote devices (Closes: #578492).
+  * Only approach rsp->data when rsp is set (Closes: #637423).
+
+ -- Luk Claes <luk@debian.org>  Mon, 19 Sep 2011 19:35:04 +0200
+
+ipmitool (1.8.11-2ubuntu6) oneiric; urgency=low
+
+  * Add armel/armhf support
+
+ -- Michael Casadevall <mcasadevall@ubuntu.com>  Wed, 05 Oct 2011 15:04:58 -0700
+
+ipmitool (1.8.11-2ubuntu5) oneiric; urgency=low
+
+  * Rebuild for OpenSSL 1.0.0.
+
+ -- Colin Watson <cjwatson@ubuntu.com>  Wed, 18 May 2011 00:10:19 +0100
+
+ipmitool (1.8.11-2ubuntu4) natty; urgency=low
+
+  * Changed openipmi from Suggests to Recommends to ensure 
+    it's installed too. (LP: #110992)
+
+ -- Jeff Lane <jeff@ubuntu.com>  Wed, 09 Mar 2011 10:40:28 -0500
+
+ipmitool (1.8.11-2ubuntu3) maverick; urgency=low
+
+  * debian/patches/101_fix_buf_overflow.patch: Add patch to fix buffer overflow.
+    (LP: #633054) 
+
+ -- Chuck Short <zulcss@ubuntu.com>  Wed, 08 Sep 2010 09:11:26 -0400
+
+ipmitool (1.8.11-2ubuntu2) maverick; urgency=low
+
+  * Actually remove 30_ipmi_delloem.patch this time.
+
+ -- Stefano Rivera <stefano@rivera.za.net>  Mon, 28 Jun 2010 12:47:48 +0200
+
+ipmitool (1.8.11-2ubuntu1) maverick; urgency=low
+
+  [ Lorenzo De Liso ]
+  * Merge from debian unstable (LP: #598993), remaining changes:
+    - debian/copyright:
+      + Add DELL copyright notice.
+
+  [ Stefano Rivera ]
+  * Replaced 30_ipmi_delloem.patch (never accepted upstream) with a new series
+    of 6 patches from upstream's patch tracker.
+
+ -- Lorenzo De Liso <blackz@ubuntu.com>  Sun, 27 Jun 2010 12:26:30 +0200
+
+ipmitool (1.8.11-2) unstable; urgency=low
+
+  * Fix password reading (Patch from Kris Popendorf 
+    <08kcn0b02@sneakemail.com> closes: #559363)
+  * Remove libreadline5-dev dependency in favour of libreadline-dev
+    (Closes: #553788)
+
+ -- Matthew Johnson <mjj29@debian.org>  Sun, 06 Dec 2009 00:05:49 +0000
+
+ipmitool (1.8.11-1ubuntu1) karmic; urgency=low
+
+  * Merge from debian unstable, remaining changes:
+    + debian/control:
+       - change Maintainer field according to specs.
+    + debian/patches/30_ipmi_delloem:.patch:
+       - Rediffed due to version bump.
+       - Dropped dpatchiness.
+    + debian/copyright:
+      - Add DELL copyright notice.
+
+ -- Chuck Short <zulcss@ubuntu.com>  Mon, 23 Mar 2009 00:01:26 +0000
+
+ipmitool (1.8.11-1) unstable; urgency=low
+
+  * New upstream release 
+  * Change to quilt rather than dpatch
+  * Refresh config.sub/config.guess in configure
+  * Bump standards version
+
+ -- Matthew Johnson <mjj29@debian.org>  Sun, 22 Mar 2009 16:44:06 +0000
+
+ipmitool (1.8.9-2ubuntu1) jaunty; urgency=low
+
+  * debian/patches/30_ipmi_delloem:
+    - add DELL specific commands (delloem)
+  * debian/patches/20_ipmi_ipmi:
+    - clean up *.orig
+  * debian/patches/20_ipmi_isol:
+    - clean up *.orig
+  * debian/copyright:
+    - add DELL copyright notice
+  * debian/control:
+    - change Maintainer field
+
+ -- Ante Karamatic <ivoks@ubuntu.com>  Wed, 18 Feb 2009 08:48:33 +0100
+
+ipmitool (1.8.9-2) unstable; urgency=medium
+
+  * Change pidfile name to the one it actually is. (Closes: #508434)
+  * Fix typo in README (Closes: #508231)
+  * Make sdr/Temperatures reading working again (Closes: #507760):
+     - Add patch to revert some bits from 1.8.8 to 1.8.9:
+       20_ipmi_sdr.dpatch (Patch from Cyril Brulebois
+       <cyril.brulebois@kerlabs.com>)
+  * Bump Standards-Version
+  * Remove empty /usr/share/ipmitool directory 
+
+ -- Matthew Johnson <mjj29@debian.org>  Tue, 19 Feb 2008 15:21:40 +0000
+
+ipmitool (1.8.9-1) unstable; urgency=low
+
+  * Adopt package (Closes: #432027)
+  * New upstream release
+    - Closes: #422864
+    - Closes: #377628
+  * Add patch to fix segfault (Closes: #389741)
+  * Add patch to fix isol (Closes: #412816)
+  * Add watch file
+  * Move from DH_COMPAT to debian/compat 
+  * Bump to dephelper v5
+
+ -- Matthew Johnson <mjj29@debian.org>  Thu, 13 Dec 2007 10:25:22 +0000
+
+ipmitool (1.8.8-3.1) unstable; urgency=high
+
+  * Non-maintainer upload.
+  * High urgency for RC bug fix.
+  * Fix build with linux-libc-dev (closes: #428929).
+  * Fix debian/rules to not rerun configure in the binary target.
+
+ -- Julien Cristau <jcristau@debian.org>  Fri, 20 Jul 2007 16:29:18 +0200
+
+ipmitool (1.8.8-3) unstable; urgency=low
+
+  * Ported fix to ipmievd from upstream version 1.8.9 (Closes: #408536):
+    - fix ipmievd fd closing bug.  Patch from Rupert Hair.
+  * Started using dpatch to apply patches.  Added dpatch to build dependencies.
+  * Add powerpc to the list of supported archs (Closes: #405455)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Tue, 03 Apr 2007 16:37:45 +0200
+
+ipmitool (1.8.8-2) unstable; urgency=low
+
+  * Add handler for the ipmievd init.d script failure during removal and
+    installation.  If it fail during installation, update
+    /etc/default/ipmievd to disable ipmievd.
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sun,  1 Oct 2006 11:21:44 +0200
+
+ipmitool (1.8.8-1) unstable; urgency=low
+
+  * New upstream release.
+    - Daemon now tries to access device before it forks, and thus will
+      report errors to the init.d script if it fail. (Closes: #362425)
+  * Make it possible to disable ipmievd by setting ENABLED=false in
+    /etc/defaults/ipmievd. (Closes: #370511)
+  * Add --oknodo as start-stop-daemon argument when stopping ipmievd,
+    to avoid returning an error if it is not running. (Closes: #370509)
+  * Update standards-version from 3.6.2.1 to 3.7.2.  No changes needed.
+  * Correct dependency and runlevel info in init.d script.
 
- -- Petter Reinholdtsen <pere@debian.org>  Fri,  8 Aug 2008 09:44:31 +0200
+ -- Petter Reinholdtsen <pere@debian.org>  Fri, 29 Sep 2006 19:16:41 +0200
 
 ipmitool (1.8.7-2) unstable; urgency=low
 
@@ -162,14 +392,14 @@ ipmitool (1.8.0) unstable; urgency=low
   * Fix chassis boot parameter support
   * Add support for linear sensors
 
- -- Duncan Laurie <duncan@iceblink.org>  Wed, Mar 16 2005 17:08:12 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Wed, 16 Mar 2005 17:08:12 -0700
 
 ipmitool (1.7.1) unstable; urgency=low
 
   * Update bmc plugin to work with new Solaris bmc driver (new ioctl
     for interface detection and new STREAMS message-based interface).
 
- -- Seth Goldberg <sethmeisterg@hotmail.com>  Mon, Mar 7 2005 18:03:00 -0800
+ -- Seth Goldberg <sethmeisterg@hotmail.com>  Mon,  7 Mar 2005 18:03:00 -0800
 
 ipmitool (1.7.0) unstable; urgency=low
 
@@ -185,7 +415,7 @@ ipmitool (1.7.0) unstable; urgency=low
   * New "bmc" plugin for Solaris 10 x86
   * Many bugfixes and contributed patches
 
- -- Duncan Laurie <duncan@iceblink.org>  Fri, Jan 7 2005 19:58:22 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Fri,  7 Jan 2005 19:58:22 -0700
 
 ipmitool (1.6.2) unstable; urgency=low
 
@@ -228,7 +458,7 @@ ipmitool (1.5.9) unstable; urgency=low
   * Add configure option for changing binary to ipmiadm for Solaris
   * Fix compile problem on Solaris 8
 
- -- Duncan Laurie <duncan@iceblink.org>  Sat, 27 Mar 2004 00:11:37 -0700
+ -- Duncan Laurie <duncan@sun.com>  Sat, 27 Mar 2004 00:11:37 -0700
 
 ipmitool (1.5.8) unstable; urgency=low
 
@@ -242,7 +472,7 @@ ipmitool (1.5.8) unstable; urgency=low
   * Add support for Linux kernel panic messages in SEL output
   * Add support for type 3 SDR records
 
- -- Duncan Laurie <duncan@iceblink.org>  Tue, 27 Jan 2004 16:23:25 -0700
+ -- Duncan Laurie <duncan@sun.com>  Tue, 27 Jan 2004 16:23:25 -0700
 
 ipmitool (1.5.7) unstable; urgency=low
 
@@ -251,7 +481,7 @@ ipmitool (1.5.7) unstable; urgency=low
   * better handling of SDR printing
   * contrib scripts for creating rrdtool graphs
 
- -- Duncan Laurie <duncan@iceblink.org>  Mon,  5 Jan 2004 17:29:50 -0700
+ -- Duncan Laurie <duncan@sun.com>  Mon,  5 Jan 2004 17:29:50 -0700
 
 ipmitool (1.5.6) unstable; urgency=low
 
@@ -260,40 +490,40 @@ ipmitool (1.5.6) unstable; urgency=low
   * Fix sdr handling of sensors that do not return a reading
   * Fix for CSV display of sensor readings/units from Fredrik Öhrn
 
- -- Duncan Laurie <duncan@iceblink.org>  Thu,  4 Dec 2003 14:47:19 -0700
+ -- Duncan Laurie <duncan@sun.com>  Thu,  4 Dec 2003 14:47:19 -0700
 
 ipmitool (1.5.5) unstable; urgency=low
 
   * Add -U option for setting LAN username
   * Fix -v usage for plugin interfaces
 
- -- Duncan Laurie <duncan@iceblink.org>  Tue, 25 Nov 2003 15:10:48 -0700
+ -- Duncan Laurie <duncan@sun.com>  Tue, 25 Nov 2003 15:10:48 -0700
 
 ipmitool (1.5.4) unstable; urgency=low
 
   * Put interface plugin API into library
   * Fix ipmievd
 
- -- Duncan Laurie <duncan@iceblink.org>  Fri, 14 Nov 2003 15:16:34 -0700
+ -- Duncan Laurie <duncan@sun.com>  Fri, 14 Nov 2003 15:16:34 -0700
 
 ipmitool (1.5.3) unstable; urgency=low
 
   * Add -g option to work with grizzly bmc
 
- -- Duncan Laurie <duncan@iceblink.org>  Mon,  3 Nov 2003 18:04:07 -0700
+ -- Duncan Laurie <duncan@sun.com>  Mon,  3 Nov 2003 18:04:07 -0700
 
 ipmitool (1.5.2) unstable; urgency=low
 
   * add support for setting gratuitous arp interval 
 
- -- Duncan Laurie <duncan@iceblink.org>  Fri, 24 Oct 2003 11:00:00 -0700
+ -- Duncan Laurie <duncan@sun.com>  Fri, 24 Oct 2003 11:00:00 -0700
 
 ipmitool (1.5.1) unstable; urgency=low
 
   * better SEL support
   * fix display bug in SDR list
 
- -- Duncan Laurie <duncan@iceblink.org>  Wed,  8 Oct 2003 17:28:51 -0700
+ -- Duncan Laurie <duncan@sun.com>  Wed,  8 Oct 2003 17:28:51 -0700
 
 ipmitool (1.5.0) unstable; urgency=low
 
@@ -301,24 +531,24 @@ ipmitool (1.5.0) unstable; urgency=low
   * add Intel IMB driver support
   * use autoconf/automake/libtool
 
- -- Duncan Laurie <duncan@iceblink.org>  Fri,  5 Sep 2003 11:57:32 -0700
+ -- Duncan Laurie <duncan@sun.com>  Fri,  5 Sep 2003 11:57:32 -0700
 
 ipmitool (1.2-1) unstable; urgency=low
 
   * New command line option parsing
   * More chassis commands supported
 
- -- Duncan Laurie <duncan@iceblink.org>  Wed,  2 Apr 2003 17:44:17 -0700
+ -- Duncan Laurie <duncan@sun.com>  Wed,  2 Apr 2003 17:44:17 -0700
 
 ipmitool (1.1-1) unstable; urgency=low
 
   * Minor fixes.
 
- -- Duncan Laurie <duncan@iceblink.org>  Tue,  1 Apr 2003 14:31:10 -0700
+ -- Duncan Laurie <duncan@sun.com>  Tue,  1 Apr 2003 14:31:10 -0700
 
 ipmitool (1.0-1) unstable; urgency=low
 
   * Initial Release.
 
- -- Duncan Laurie <duncan@iceblink.org>  Sun, 30 Mar 2003 21:30:46 -0700
+ -- Duncan Laurie <duncan@sun.com>  Sun, 30 Mar 2003 21:30:46 -0700
 
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
index 80725ab..219e010 100644
--- a/debian/control
+++ b/debian/control
@@ -1,15 +1,23 @@
 Source: ipmitool
 Section: utils
 Priority: optional
-Maintainer: Petter Reinholdtsen <pere@debian.org>
-Uploaders: Duncan Laurie <duncan@iceblink.org>
-Build-Depends: debhelper (>> 4.0.0), libreadline5-dev | libreadline-dev, libssl-dev, autoconf, automake1.9 | automake, autotools-dev, libtool
-Standards-Version: 3.6.2.1
+Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Build-Depends:
+ autotools-dev, 
+ debhelper (>> 9),
+ dh-systemd (>= 1.5),
+ libncurses-dev, 
+ libreadline-dev,
+ libssl-dev 
+Standards-Version: 3.9.5
+Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/ipmitool.git
+Vcs-Git: git://anonscm.debian.org/collab-maint/ipmitool.git
+Homepage: http://sourceforge.net/projects/ipmitool/
 
 Package: ipmitool
-Architecture: i386 amd64 ia64
-Depends: ${shlibs:Depends}, lsb-base
-Suggests: openipmi
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base
+Recommends: openipmi
 Description: utility for IPMI control with kernel driver or LAN interface
  A utility for managing and configuring devices that support the
  Intelligent Platform Management Interface.  IPMI is an open standard
diff --git a/debian/copyright b/debian/copyright
index cb3569d..eb6858d 100644
--- a/debian/copyright
+++ b/debian/copyright
@@ -1,36 +1,47 @@
-This package was debianized by Duncan Laurie before
-2003-11-18 17:55:21 +0100.
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0
+Source: http://sourceforge.net/projects/ipmitool/
 
-It was downloaded from <URL:http://ipmitool.sourceforge.net/>
+Files: *
+Copyright: 1999-2002 Aladdin Enterprises
+           2002-2008 Intel Corporation
+           2003      Elmar Hoffmann 
+           2003-2007 Kontron Canada, Inc.
+           2003      Ducan Laurie
+           2003-2004 Fredrik Ohrn
+           2003-2005 Sun Microsystems, Inc.
+           2004-2008 Dell Inc.
+           2005      International Business Machines, Inc.
+           2005      Tyan Computer Corp
+           2009-2014 Oracle and/or its affiliates.
+           2012      Hewlett-Packard Development Company, L.P.
+           2012      Pigeon Point Systems
+           2013      Zdenek Styblik
+           2014      Jörg Frings-Fürst
+License: BSD-3-clause
 
-Upstream Author: Duncan Laurie <duncan@iceblink.org>
-  
-Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+License: BSD-3-clause
+ All rights reserved.
+ .
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+ 1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+ 3. The name of the author may not be used to endorse or promote products
+    derived from this software without specific prior written permission.
+ .
+ THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
 
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-Redistribution of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
-Redistribution in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
-Neither the name of Sun Microsystems, Inc. or the names of
-contributors may be used to endorse or promote products derived
-from this software without specific prior written permission.
-
-This software is provided "AS IS," without a warranty of any kind.
-ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
-INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
-PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
-SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
-FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
-OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
-SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
-OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
-PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
-LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
-EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
diff --git a/debian/dirs b/debian/dirs
index 58600cc..03d0b5b 100644
--- a/debian/dirs
+++ b/debian/dirs
@@ -1,4 +1 @@
-usr/bin
-usr/sbin
-usr/share/ipmitool
-usr/share/doc/ipmitool
+usr/lib/modules-load.d/
\ No newline at end of file
diff --git a/debian/ipmitool.ipmievd.default b/debian/ipmitool.ipmievd.default
new file mode 100644
index 0000000..0368b6c
--- /dev/null
+++ b/debian/ipmitool.ipmievd.default
@@ -0,0 +1,11 @@
+# This is a shell script fraction
+
+#
+# To enable ipmievd set ENABLED="true" for sysvinit (ignored by systemd)
+#
+ENABLED="false"
+
+
+# Options to the daemon ipmievd(8).
+#
+IPMIEVD_OPTIONS="open daemon"
diff --git a/debian/ipmitool.ipmievd.init b/debian/ipmitool.ipmievd.init
new file mode 100644
index 0000000..62d8d13
--- /dev/null
+++ b/debian/ipmitool.ipmievd.init
@@ -0,0 +1,125 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          ipmievd
+# Required-Start:    $remote_fs $syslog
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: IPMI event daemon
+# Description:       ipmievd  is a daemon which will listen for events
+#                    from the BMC that are being sent to the SEL and
+#                    also log those messages to syslog.
+### END INIT INFO
+#
+# Author:	Elmar Hoffmann <elho@elho.net>
+# Licence:      This script is public domain using the same
+#               licence as ipmitool itself.
+# Modified by:  Petter Reinholdtsen
+#               Jörg Frings-Fürst 2014-06-01
+
+set -e
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DESC="IPMI event daemon"
+NAME=ipmievd
+DAEMON=/usr/sbin/$NAME
+PIDFILE=/var/run/$NAME.pid0
+SCRIPTNAME=/etc/init.d/$NAME
+ENABLED=true
+
+# Gracefully exit if the package has been removed.
+test -x $DAEMON || exit 0
+
+. /lib/lsb/init-functions
+test -r /etc/default/rcS && . /etc/default/rcS
+
+# Options used by ipmievd.
+#
+# "open" uses the asynchronous event notification from the OpenIPMI
+# kernel driver, "sel" uses active polling of the contents of the SEL
+# for new events.
+#
+# Need to force 'daemon' mode, to make sure messages are sent to
+# syslog and the program forks into the background.
+#
+# Se ipmievd(8) for more info.
+IPMIEVD_OPTIONS="open daemon"
+
+#
+# requested kernelmodules
+#
+REQMODULES="ipmi_devintf ipmi_msghandler ipmi_poweroff ipmi_si ipmi_watchdog"
+
+# Read config file if it is present.
+[ -f /etc/default/$NAME ] && . /etc/default/$NAME
+
+test "$ENABLED" != "false" || exit 0
+
+# Backwards compatibility with version 1.8.6-2 and 1.8.6-1.  The
+# variable was renamed to be compatible with upstream, SuSe and RedHat.
+if [ -n "$IPMIEVD_OPTS" ]; then
+    echo "warning: /etc/default/$NAME variable IPMIEVD_OPTS should be renamed to IPMIEVD_OPTIONS"
+    IPMIEVD_OPTIONS="$IPMIEVD_OPTS"
+fi
+
+# 
+# function to load requested kernelmodules
+do_modprobe() {
+    if [ -x /sbin/modprobe -a -f /proc/modules ]
+    then
+        modprobe -q "$1" || true
+    fi
+}
+
+#
+#	Function that starts the daemon/service.
+#
+d_start() {
+	start-stop-daemon --start --quiet --exec $DAEMON --pidfile $PIDFILE -- $IPMIEVD_OPTIONS
+}
+
+#
+#	Function that stops the daemon/service.
+#
+d_stop() {
+	start-stop-daemon --stop --oknodo --quiet --name $NAME --exec $DAEMON --pidfile $PIDFILE 
+}
+
+CODE=0
+
+case "$1" in
+  start)
+	# load kernelmodules
+	for rmod in ${REQMODULES} 
+	do
+	    do_modprobe ${rmod} 
+	done
+	[ "$VERBOSE" != no ] && log_begin_msg "Starting $DESC" "$NAME"
+	d_start || CODE=$?
+	[ "$VERBOSE" != no ] && log_end_msg $CODE
+	exit $CODE
+	;;
+  stop)
+	log_begin_msg "Stopping $DESC" "$NAME"
+	d_stop || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  restart|force-reload)
+	log_begin_msg "Restarting $DESC" "$NAME"
+	d_stop || true
+	sleep 1
+	d_start || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  status)
+	status_of_proc $DAEMON $NAME
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
+	exit 1
+	;;
+esac
+
+exit 0
diff --git a/debian/ipmitool.ipmievd.service b/debian/ipmitool.ipmievd.service
new file mode 120000
index 0000000..1ca4cb1
--- /dev/null
+++ b/debian/ipmitool.ipmievd.service
@@ -0,0 +1 @@
+systemd/ipmitool.ipmievd.service
\ No newline at end of file
diff --git a/debian/ipmitool.postinst b/debian/ipmitool.postinst
new file mode 100644
index 0000000..fb978c4
--- /dev/null
+++ b/debian/ipmitool.postinst
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+set -e
+
+
+ipmievd_initd_failed() {
+	echo "Unable to start ipmievd during installation.  Trying to disable."
+	if [ -f /etc/default/ipmievd ] && \
+           grep -q ^ENABLED=false /etc/default/ipmievd ; then
+	    :
+	else
+	    touch /etc/default/ipmievd
+	    echo "ENABLED=false" >> /etc/default/ipmievd
+	fi
+}
+
+#DEBHELPER#
diff --git a/debian/ipmitool.postrm b/debian/ipmitool.postrm
new file mode 100644
index 0000000..6cd9693
--- /dev/null
+++ b/debian/ipmitool.postrm
@@ -0,0 +1,10 @@
+#!/bin/sh 
+
+set -e
+
+
+ipmievd_initd_failed() {
+    :
+}
+
+#DEBHELPER#
diff --git a/debian/ipmitool.prerm b/debian/ipmitool.prerm
new file mode 100644
index 0000000..b45afde
--- /dev/null
+++ b/debian/ipmitool.prerm
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set -e
+
+ipmievd_initd_failed() {
+    :
+}
+
+#DEBHELPER#
diff --git a/debian/patches/096-manpage_longlines.patch b/debian/patches/096-manpage_longlines.patch
new file mode 100644
index 0000000..4acf71a
--- /dev/null
+++ b/debian/patches/096-manpage_longlines.patch
@@ -0,0 +1,56 @@
+Description: long lines in man-page
+ prevent "can't break line" warnings
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Forwarded: not-needed
+Last-Update: 2014-05-20
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/doc/ipmitool.1
+===================================================================
+--- trunk.orig/doc/ipmitool.1	2014-05-27 19:38:41.000000000 +0200
++++ trunk/doc/ipmitool.1	2014-05-27 19:38:41.000000000 +0200
+@@ -1034,7 +1034,7 @@
+       AMC slot B2 topology:
+          Port 0 =====> On Carrier Device ID 0, Port 3
+          Port 2 =====> AMC slot B1, Port 2
+-   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
++   *-*-*-* *-*-* *-*-* *-*-* *-*-* *-*-* *-*-*
+    From Carrier file: carrierfru
+       On Carrier Device ID 0 topology:
+          Port 0 =====> AMC slot B1, Port 4
+@@ -1090,7 +1090,7 @@
+     \-Link Type: AMC.2 Ethernet
+     \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+     \-Link Group ID: 0 || Link Asym. Match: exact match
+-   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
++   *-*-*-* *-*-* *-*-* *-*-* *-*-* *-*-* *-*-*
+   AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
+    Matching Result
+    - From On-Carrier Device ID 0
+@@ -1103,7 +1103,7 @@
+     \-Link Type: AMC.2 Ethernet
+     \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+     \-Link Group ID: 0 || Link Asym. Match: exact match
+-   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
++   *-*-*-* *-*-* *-*-* *-*-* *-*-* *-*-* *-*-*
+  On-Carrier Device vs AMC slot A2
+   AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
+    Matching Result
+@@ -1117,7 +1117,7 @@
+     \-Link Type: AMC.2 Ethernet
+     \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+     \-Link Group ID: 0 || Link Asym. Match: exact match
+-   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
++   *-*-*-* *-*-* *-*-* *-*-* *-*-* *-*-* *-*-*
+  AMC slot B1 vs AMC slot A2
+   AMC slot A2 port 2 ==> AMC slot B1 port 2
+    Matching Result
+@@ -1131,7 +1131,7 @@
+     \-Link Type: AMC.3 Storage
+     \-Link Type extension: Serial Attached SCSI (SAS/SATA)
+     \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
+- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
++   *-*-*-* *-*-* *-*-* *-*-* *-*-* *-*-* *-*-*
+ .TP
+ \fIunmatch\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
+ .br
diff --git a/debian/patches/097-source_typo.patch b/debian/patches/097-source_typo.patch
new file mode 100644
index 0000000..1323caf
--- /dev/null
+++ b/debian/patches/097-source_typo.patch
@@ -0,0 +1,27 @@
+Description: typo in source
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Forwarded: https://sourceforge.net/p/ipmitool/patches/101/
+Last-Update: 2014-05-19
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/lib/ipmi_fwum.c
+===================================================================
+--- trunk.orig/lib/ipmi_fwum.c	2014-03-28 13:36:21.000000000 +0100
++++ trunk/lib/ipmi_fwum.c	2014-05-19 14:58:48.313044838 +0200
+@@ -892,14 +892,14 @@
+ 		}
+ 		if (rc == 0) {
+ 			if ((address % 1024) == 0) {
+-				KfwumShowProgress("Writting Firmware in Flash",
++				KfwumShowProgress("Writing Firmware in Flash",
+ 						address, totalSize);
+ 			}
+ 			sequenceNumber++;
+ 		}
+ 	} while ((rc == 0) && (address < totalSize));
+ 	if (rc == 0) {
+-		KfwumShowProgress("Writting Firmware in Flash",
++		KfwumShowProgress("Writing Firmware in Flash",
+ 				100, 100);
+ 	}
+ 	return rc;
diff --git a/debian/patches/098-manpage_typo.patch b/debian/patches/098-manpage_typo.patch
new file mode 100644
index 0000000..c667278
--- /dev/null
+++ b/debian/patches/098-manpage_typo.patch
@@ -0,0 +1,245 @@
+Description: typo in man-page
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Last-Update: 2014-05-19
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/doc/ipmitool.1
+===================================================================
+--- trunk.orig/doc/ipmitool.1	2014-05-19 14:51:15.664997239 +0200
++++ trunk/doc/ipmitool.1	2014-05-19 14:54:07.340072131 +0200
+@@ -10,47 +10,47 @@
+ Any recognized option is accepted. Conditional options may be ignored or it's usage postponed until shell or exec processes relevant command.
+ .br
+ 
+-<general-options>   := [ -h | -V | -v | -I <interface> | -H <address> |
+-                         -d <N> | -p <port> | -c | -U <username> |
+-                         -L <privlvl> | -l <lun> | -m <local_address> |
+-                         -N <sec> | -R <count> | <password-option> |
++<general\-options>   := [ \-h | \-V | \-v | \-I <interface> | \-H <address> |
++                         \-d <N> | \-p <port> | \-c | \-U <username> |
++                         \-L <privlvl> | \-l <lun> | \-m <local_address> |
++                         \-N <sec> | \-R <count> | <password\-option> |
+                          <oem-option> | <bridge-options> ]
+ 
+-<conditional-opts>  := [ <lan-options> | <lanplus-options> |
+-                         <command-options> ]
++<conditional\-opts>  := [ <lan\-options> | <lanplus\-options> |
++                         <command\-options> ]
+ .br
+ Bridging:
+ .br
+-<bridge-options>    := -t <target_address> [ -b <channel> |
+-                       [ -T <address> | -B <channel> ] ]
++<bridge\-options>    := \-t <target_address> [ \-b <channel> |
++                       [ \-T <address> | \-B <channel> ] ]
+ .br
+ 
+-Options used with -I lan:
++Options used with \-I lan:
+ .br
+-<lan-options>       := [ -A <authtype> ]
++<lan\-options>       := [ \-A <authtype> ]
+ .br
+ 
+-Options used with -I lanplus:
++Options used with \-I lanplus:
+ .br
+-<lanplus-options>   := [ -C <ciphersuite> | <key-option> ]
++<lanplus\-options>   := [ \-C <ciphersuite> | <key\-option> ]
+ .br
+ 
+ Option groups setting same value:
+ .br
+-<key-option>        := [ -k <key> | -K | -y <hex_key> | -Y ]
++<key\-option>        := [ \-k <key> | \-K | \-y <hex_key> | \-Y ]
+ .br
+-<password-option>   := [ -f <password_file> | -a | -P <password> | -E ]
++<password\-option>   := [ \-f <password_file> | \-a | \-P <password> | \-E ]
+ .br
+-<oem-option>        := [ -o <oemtype> | -g | -s ]
++<oem\-option>        := [ \-o <oemtype> | \-g | \-s ]
+ .br
+ 
+ Options used with specific command <command-options>:
+ .br
+-<options-sdr>       := [ -S <sdr_cache_file> ]
++<options\-sdr>       := [ \-S <sdr_cache_file> ]
+ .br
+-<options-sel>       := [ -O <sel_oem> ]
++<options\-sel>       := [ \-O <sel_oem> ]
+ .br
+-<options-sol>       := [ -e <sol_escape_char> ]
++<options\-sol>       := [ \-e <sol_escape_char> ]
+ 
+ 
+ .SH "DESCRIPTION"
+@@ -120,7 +120,7 @@
+ will default to NULL.
+ .TP 
+ \fB\-g\fR
+-Deprecated. Use: -o intelplus
++Deprecated. Use: \-o intelplus
+ .TP 
+ \fB\-h\fR
+ Get basic usage help from the command line.
+@@ -151,7 +151,7 @@
+ .TP 
+ \fB\-m\fR <\fIlocal_address\fP>
+ Set the local IPMB address.  The local address defaults to 0x20
+-or is auto discovered on PICMG platforms when -m is not specified.
++or is auto discovered on PICMG platforms when \-m is not specified.
+ There should be no need to change the local address for normal operation.
+ .TP 
+ \fB\-N\fR <\fIsec\fP>
+@@ -185,7 +185,7 @@
+ Command \fIhpm\fP uses fixed value of 10 retries.
+ .TP 
+ \fB\-s\fR
+-Deprecated. Use: -o supermicro
++Deprecated. Use: \-o supermicro
+ .TP 
+ \fB\-S\fR <\fIsdr_cache_file\fP>
+ Use local file for remote SDR cache.  Using a local SDR cache
+@@ -223,7 +223,7 @@
+ \fB\-y\fR <\fIhex key\fP>
+ Use supplied Kg key for IPMIv2.0 authentication. The key is expected in
+ hexadecimal format and can be used to specify keys with non-printable
+-characters. E.g. '-k PASSWORD' and '-y 50415353574F5244' are
++characters. E.g. '\-k PASSWORD' and '\-y 50415353574F5244' are
+ equivalent.
+ The default is not to use any Kg key.
+ .TP 
+@@ -1051,7 +1051,7 @@
+ \fIpower\fP <\fBxx=filename1\fR> <\fBxx=filename2\fR> \fB...\fr
+ .br
+ 
+-Display power supply informations between carrier and AMC modules.
++Display power supply information between carrier and AMC modules.
+ .TP
+ \fIall\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
+ .br
+@@ -1063,7 +1063,7 @@
+ .TP
+ \fIfrushow\fP <\fBxx=filename\fR>
+ .br
+-Convert a binary FRU file into human readable text format. Use -v option to get
++Convert a binary FRU file into human readable text format. Use \-v option to get
+ more display information.
+ 
+ .RE
+@@ -1081,56 +1081,56 @@
+   AMC slot B1 port 0 ==> On-Carrier Device 0 port 16
+    Matching Result
+    - From On-Carrier Device ID 0
+-    -Channel ID 11 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 11 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    - To AMC slot B1
+-    -Channel ID 0 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 0 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
+   AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
+    Matching Result
+    - From On-Carrier Device ID 0
+-    -Channel ID 6 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 6 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    - To AMC slot B1
+-    -Channel ID 1 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 1 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
+  On-Carrier Device vs AMC slot A2
+   AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
+    Matching Result
+    - From On-Carrier Device ID 0
+-    -Channel ID 9 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 9 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    - To AMC slot A2
+-    -Channel ID 0 || Lane 0: enable
+-    -Link Type: AMC.2 Ethernet
+-    -Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
+-    -Link Group ID: 0 || Link Asym. Match: exact match
++    \-Channel ID 0 || Lane 0: enable
++    \-Link Type: AMC.2 Ethernet
++    \-Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
++    \-Link Group ID: 0 || Link Asym. Match: exact match
+    *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
+  AMC slot B1 vs AMC slot A2
+   AMC slot A2 port 2 ==> AMC slot B1 port 2
+    Matching Result
+    - From AMC slot B1
+-    -Channel ID 2 || Lane 0: enable
+-    -Link Type: AMC.3 Storage
+-    -Link Type extension: Serial Attached SCSI (SAS/SATA)
+-    -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
++    \-Channel ID 2 || Lane 0: enable
++    \-Link Type: AMC.3 Storage
++    \-Link Type extension: Serial Attached SCSI (SAS/SATA)
++    \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
+    - To AMC slot A2
+-    -Channel ID 2 || Lane 0: enable
+-    -Link Type: AMC.3 Storage
+-    -Link Type extension: Serial Attached SCSI (SAS/SATA)
+-    -Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
++    \-Channel ID 2 || Lane 0: enable
++    \-Link Type: AMC.3 Storage
++    \-Link Type extension: Serial Attached SCSI (SAS/SATA)
++    \-Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
+  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
+ .TP
+ \fIunmatch\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
+@@ -2981,7 +2981,7 @@
+ 
+ Execute the service processor command line interface commands.
+ Without any command string, an interactive session is started
+-in the service processor command line environ ment.  If a
++in the service processor command line environment.  If a
+ command string is specified, the command string is executed
+ on the service processor and the connection is closed.
+ .TP
+@@ -3376,7 +3376,7 @@
+ The ipmitool \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
+ drivers.  
+ .LP
+-You can tell ipmitool to use the FreeIPMI interface with the -I option:
++You can tell ipmitool to use the FreeIPMI interface with the \-I option:
+ .PP
+ ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
+ 
+@@ -3386,7 +3386,7 @@
+ The ipmitool \fIimb\fP interface supports the Intel IMB (Intel
+ Inter-module Bus) Interface through the /dev/imb device.  
+ .LP
+-You can tell ipmitool to use the IMB interface with the -I option:
++You can tell ipmitool to use the IMB interface with the \-I option:
+ .PP
+ ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>
+ 
diff --git a/debian/patches/099_readme_typo b/debian/patches/099_readme_typo
new file mode 100644
index 0000000..732fc43
--- /dev/null
+++ b/debian/patches/099_readme_typo
@@ -0,0 +1,25 @@
+## 99_readme_typo.dpatch by dann frazier <dannf@hp.com>
+##
+## Typo in README. Closes: #508231
+--- a/README
++++ b/README
+@@ -24,7 +24,7 @@
+ ==========
+ I originally wrote ipmitool while between projects and employeed at Sun
+ Microsystems.  Sun had just embarked on a new line of general-purpose x86
+-servers that inclued an OEM Intel board with an IPMIv1.5 BMC on board.
++servers that included an OEM Intel board with an IPMIv1.5 BMC on board.
+ It started with an idea that remote chassis power control would be a handy
+ feature for my systems in the lab and from there it grew into a multi-
+ purpose tool that lots of people found useful.  I decided to release it
+--- a/doc/ipmitool.1
++++ b/doc/ipmitool.1
+@@ -44,7 +44,7 @@
+ IPMI management of a local system interface requires a compatible IPMI
+ kernel driver to be installed and configured.  On Linux this driver is
+ called \fIOpenIPMI\fP and it is included in standard distributions.
+-On Solaris this driver is called \fIBMC\fP and is inclued in Solaris 10.
++On Solaris this driver is called \fIBMC\fP and is included in Solaris 10.
+ Management of a remote station requires the IPMI\-over\-LAN interface to be
+ enabled and configured.  Depending on the particular requirements of each
+ system it may be possible to enable the LAN interface using ipmitool over
diff --git a/debian/patches/101_fix_buf_overflow.patch b/debian/patches/101_fix_buf_overflow.patch
new file mode 100644
index 0000000..68f05d8
--- /dev/null
+++ b/debian/patches/101_fix_buf_overflow.patch
@@ -0,0 +1,22 @@
+Description: fix buffer overflow
+ based on 101_fix_buf_overflow from Leo Iannacone <l3on@ubuntu.com> 
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Bug: TSOL buffer overflow
+Bug-ubuntu: https://bugs.launchpad.net/ubuntu/+source/ipmitool/+bug/633054
+Forwarded: https://sourceforge.net/p/ipmitool/patches/100/
+Last-Update: 2014-05-18
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/lib/ipmi_tsol.c
+===================================================================
+--- trunk.orig/lib/ipmi_tsol.c	2014-05-18 19:36:46.059192272 +0200
++++ trunk/lib/ipmi_tsol.c	2014-05-18 19:37:36.028189246 +0200
+@@ -385,7 +385,7 @@
+ 	socklen_t mylen;
+ 	char *recvip = NULL;
+ 	char out_buff[IPMI_BUF_SIZE * 8], in_buff[IPMI_BUF_SIZE];
+-	char buff[IPMI_BUF_SIZE + 4];
++	char buff[IPMI_BUF_SIZE * 8 + 4];
+ 	int fd_socket, result, i;
+ 	int out_buff_fill, in_buff_fill;
+ 	int ip1, ip2, ip3, ip4;
diff --git a/debian/patches/112_fix_CVE-2011-4339.patch b/debian/patches/112_fix_CVE-2011-4339.patch
new file mode 100644
index 0000000..f67b845
--- /dev/null
+++ b/debian/patches/112_fix_CVE-2011-4339.patch
@@ -0,0 +1,21 @@
+Description: CVE-2011-4339
+ insecure file permission when creating PID files
+ based on 112_fix_CVE-2011-4339
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651917
+Forwarded: https://sourceforge.net/p/ipmitool/patches/99/
+Last-Update: 2014-05-18
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/lib/helper.c
+===================================================================
+--- trunk.orig/lib/helper.c	2014-05-18 18:50:55.000000000 +0200
++++ trunk/lib/helper.c	2014-05-18 19:30:41.275908129 +0200
+@@ -657,7 +657,6 @@
+ #endif
+ 
+ 	chdir("/");
+-	umask(0);
+ 
+ 	for (fd=0; fd<64; fd++) {
+ 		if (fd != intf->fd)
diff --git a/debian/patches/115-lib_declarations.patch b/debian/patches/115-lib_declarations.patch
new file mode 100644
index 0000000..8fc1356
--- /dev/null
+++ b/debian/patches/115-lib_declarations.patch
@@ -0,0 +1,23 @@
+Description: Correct function declarations
+Author: Jörg Frings-Fürst <debian@jff-webhosting.net>
+Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=749913
+Last-Update: 2014-05-31
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+Index: trunk/lib/ipmi_kontronoem.c
+===================================================================
+--- trunk.orig/lib/ipmi_kontronoem.c	2014-03-28 13:36:21.000000000 +0100
++++ trunk/lib/ipmi_kontronoem.c	2014-05-31 10:25:10.583475442 +0200
+@@ -53,9 +53,9 @@
+                          uint8_t id, uint32_t offset, uint32_t length, 
+                          uint8_t *frubuf);
+ extern int write_fru_area(struct ipmi_intf * intf, struct fru_info *fru, 
+-                          unsigned char id, unsigned int soffset,  
+-                          unsigned int doffset,  unsigned int length, 
+-                          unsigned char *pFrubuf);
++                          uint8_t id, uint16_t soffset,  
++                          uint16_t doffset,  uint16_t length, 
++                          uint8_t *pFrubuf);
+ 
+ extern char * get_fru_area_str(uint8_t * data, uint32_t * offset);
+ 
diff --git a/debian/patches/series b/debian/patches/series
new file mode 100644
index 0000000..bc270d8
--- /dev/null
+++ b/debian/patches/series
@@ -0,0 +1,7 @@
+115-lib_declarations.patch
+097-source_typo.patch
+098-manpage_typo.patch
+101_fix_buf_overflow.patch
+112_fix_CVE-2011-4339.patch
+099_readme_typo
+096-manpage_longlines.patch
diff --git a/debian/rules b/debian/rules
index 96a6920..320b420 100755
--- a/debian/rules
+++ b/debian/rules
@@ -1,9 +1,17 @@
 #!/usr/bin/make -f
 
+#include /usr/share/quilt/quilt.make
+
 #export DH_VERBOSE=1
-export DH_COMPAT=4
 export DH_OPTIONS
 
+#
+# Hardening
+#
+export DEB_BUILD_HARDENING=1
+
+
+
 CFLAGS = -Wall -g
 
 ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
@@ -15,104 +23,19 @@ ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
 	INSTALL_PROGRAM += -s
 endif
 
-configure: configure-stamp
-configure-stamp:
-	dh_testdir
-
-	./bootstrap
-
-	./configure --prefix=/usr \
-		    --with-kerneldir \
-		    --mandir=/usr/share/man
-	touch configure-stamp
-
-#Architecture 
-build: build-arch build-indep
-
-build-arch: build-arch-stamp
-build-arch-stamp: configure-stamp 
-
-# Add here commands to compile the arch part of the package.
-	$(MAKE)
-
-build-indep: build-indep-stamp
-build-indep-stamp: configure-stamp 
-
-# Add here commands to compile the indep part of the package.
-#$(MAKE) doc
+%:
+	dh $@ --with systemd
 
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-arch-stamp build-indep-stamp configure-stamp
-
-# Add here commands to clean up after the build process.
-	-$(MAKE) distclean
-
-	dh_clean
-
-install: install-arch #install-indep
-install-indep:
-	dh_testdir
-	dh_testroot
-	dh_clean -k -i
-	dh_installdirs -i
-
-# Add here commands to install the indep part of the package into
-# debian/<package>-doc.
-#INSTALLDOC#
-#	$(MAKE) install-doc DESTDIR=$(CURDIR)/debian/tmp/ipmitool-doc
-#	dh_movefiles -i
-
-install-arch:
-	dh_testdir
-	dh_testroot
-	dh_clean -k -a
-	dh_installdirs -a
-
-# Add here commands to install the arch part of the package into 
-# debian/tmp.
-	$(MAKE) install DESTDIR=$(CURDIR)/debian/ipmitool
-
-	# No need to have two copies of the license text in the package.
+override_dh_auto_install:
+	dh_auto_install
+	cp -f $(CURDIR)/debian/systemd/ipmitool.conf $(CURDIR)/debian/ipmitool/usr/lib/modules-load.d/ipmievd.conf
+	# No need to have two copies of the license text/changelog in the package.
 	$(RM) $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/COPYING
+	$(RM) $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/ChangeLog 
+	
+override_dh_installinit:
+	dh_installinit --name ipmievd --error-handler=ipmievd_initd_failed
 
-	# Move upstream changelog to correct filename.
-	mv $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/ChangeLog \
-	  $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog
-
-	# Compress to avoid lintian warning.  Not sure why dh_compress
-	# isn't fixing this.
-	gzip -9 $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog
-
-#	dh_movefiles -a
-# Must not depend on anything. This is to be called by
-# binary-arch/binary-multi
-# in another 'make' thread.
-binary-common:
-	dh_testdir
-	dh_testroot
-	dh_installdocs
-	dh_installchangelogs 
-	dh_installinit --name ipmievd
-	dh_link
-	dh_strip
-	dh_compress 
-	dh_fixperms
-	dh_makeshlibs
-	dh_shlibdeps
-	dh_installdeb
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-# Build architecture independant packages using the common target.
-binary-indep: build-indep install-indep
-	$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
-
-# Build architecture dependant packages using the common target.
-binary-arch: build-arch install-arch
-	$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
-
-binary: binary-arch #binary-indep
-.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch configure
+override_dh_auto_configure:
+	dh_auto_configure -- --prefix=/usr --with-kerneldir --mandir=/usr/share/man
 
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..163aaf8
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (quilt)
diff --git a/debian/source/options b/debian/source/options
new file mode 100644
index 0000000..22a4de9
--- /dev/null
+++ b/debian/source/options
@@ -0,0 +1,2 @@
+compression = xz
+compression-level = 9
diff --git a/debian/systemd/ipmitool.conf b/debian/systemd/ipmitool.conf
new file mode 100644
index 0000000..cdfba64
--- /dev/null
+++ b/debian/systemd/ipmitool.conf
@@ -0,0 +1,7 @@
+# systemd kernelmodules for ipmitools
+#
+ipmi_devintf
+ipmi_msghandler
+ipmi_poweroff
+ipmi_si
+ipmi_watchdog
diff --git a/debian/systemd/ipmitool.ipmievd.service b/debian/systemd/ipmitool.ipmievd.service
new file mode 100644
index 0000000..e7a8528
--- /dev/null
+++ b/debian/systemd/ipmitool.ipmievd.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=IPMI event daemon
+
+[Service]
+Type=forking
+EnvironmentFile=-/etc/default/ipmievd
+ExecStart=/usr/sbin/ipmievd $IPMIEVD_OPTIONS
+
+[Install]
+WantedBy=multi-user.target
+Alias=ipmi.service
diff --git a/debian/watch b/debian/watch
new file mode 100644
index 0000000..d6990ab
--- /dev/null
+++ b/debian/watch
@@ -0,0 +1,3 @@
+version=3
+opts=uversionmangle=s/\.(tar.*|tgz|zip|gz|bz2)$// \
+http://sf.net/ipmitool/ipmitool-?_?([\d+\.]+|\d+)\.(tar.*|tgz|zip|gz|bz2) debian uupdate