summaryrefslogtreecommitdiff
path: root/doc/ipmitool.1.in
diff options
context:
space:
mode:
Diffstat (limited to 'doc/ipmitool.1.in')
-rw-r--r--doc/ipmitool.1.in86
1 files changed, 43 insertions, 43 deletions
diff --git a/doc/ipmitool.1.in b/doc/ipmitool.1.in
index 13ab35e..1a07cb1 100644
--- a/doc/ipmitool.1.in
+++ b/doc/ipmitool.1.in
@@ -3,7 +3,7 @@
ipmitool \- utility for controlling IPMI\-enabled devices
.SH "SYNOPSIS"
-.BR ipmitool
+.br ipmitool
[ <options> ] <command> [ <sub-commands and sub-options> ]
<options> := [ <general-options> | <conditional-opts> ]
@@ -68,7 +68,7 @@ On Solaris this driver is called \fIBMC\fP and is included in Solaris 10.
Management of a remote station requires the IPMI\-over\-LAN interface to be
enabled and configured. Depending on the particular requirements of each
system it may be possible to enable the LAN interface using
-.BR ipmitool
+.br ipmitool
over the system interface.
.SH "OPTIONS"
.TP
@@ -102,7 +102,7 @@ IPMI v2.0 specification. The default is 17 which specifies RAKP\-HMAC\-SHA256
authentication, HMAC\-SHA256\-128 integrity, and AES\-CBC\-128 encryption algorithms.
NOTE: In
-.BR ipmitool
+.br ipmitool
1.8.18 and earlier the default was 3, which was insecure and was not supported
by some more recent BMC implementations.
.TP
@@ -242,7 +242,7 @@ Change Size of Communication Channel. (OEM)
.LP
If no password method is specified then
-.BR ipmitool
+.br ipmitool
will prompt the user for a password. If no password is entered at the prompt,
the remote server password will default to NULL.
.SH "SECURITY"
@@ -267,17 +267,17 @@ local station.
For IPMI v1.5, the maximum password length is 16 characters; longer
passwords might be truncated or rejected by the server, or rejected
by
-.BR ipmitool .
+.br ipmitool .
For IPMI v2.0, the maximum password length is 20 characters; longer
passwords will be rejected by
-.BR ipmitool .
+.br ipmitool .
.SH "COMMANDS"
.TP
\fIhelp\fP
This can be used to get command\-line help on
-.BR ipmitool
+.br ipmitool
commands. It may also be placed at the end of commands to get option usage help.
> ipmitool help
@@ -1223,7 +1223,7 @@ Get a list of all the possible Sensor States and pre-defined Sensor State
Shortcuts available for a particular sensor. \fBsensorid\fR is the character
string representation of the sensor and must be enclosed in double quotes
if it includes white space. Several different commands including
-.BR ipmitool
+.br ipmitool
\fIsensor list\fP may be used to obtain a list that includes
the \fBsensorid\fR strings representing the sensors on a given system.
.RS
@@ -1287,7 +1287,7 @@ Finding sensor PS 2T Fan Fault... ok
.RS
Execute
-.BR ipmitool
+.br ipmitool
commands from \fIfilename\fR. Each line is a
complete command. The syntax of the commands are defined by the
COMMANDS section in this manpage. Each line may have an optional
@@ -1698,7 +1698,7 @@ user, operator, admin, oem.
.br
Causes
-.BR ipmitool
+.br ipmitool
to enter Intel IPMI v1.5 Serial Over LAN mode. An RMCP+
connection is made to the BMC, the terminal is set to raw mode, and user
input is sent to the serial console on the remote server. On exit,
@@ -1752,7 +1752,7 @@ Select the next boot order on the Kontron CP6012.
These commands will allow you to configure IPMI LAN channels
with network information so they can be used with the
-..BR ipmitool
+.br ipmitool
\fIlan\fP and \fIlanplus\fP interfaces. \fINOTE\fR: To
determine on which channel the LAN interface is located, issue
the `channel info \fInumber\fR' command until you come across
@@ -2035,7 +2035,7 @@ Display the Management Controller Globally Unique IDentifier.
.br
This is the default behavior for
-.BR ipmitool (1).
+.br ipmitool (1).
Try to automatically detect the encoding based on the value of the
version field and (for version 1) the timestamp. The version is
@@ -2049,11 +2049,11 @@ neither one has that, then the precedence order is as follows:
\fIsmbios\fP, \fIipmi\fP, \fIrfc4122\fP.
If neither encoding yields a valid version field, then
-.BR ipmitool (1)
+.br ipmitool (1)
defaults to \fIdump\fP mode.
If this option is in use, then
-.BR ipmitool (1)
+.br ipmitool (1)
will also print out the detected encoding and warn
regarding IPMI specification violation if the encoding isn't \fIipmi\fP.
@@ -2551,7 +2551,7 @@ Discover Node Manager presence as well as the Node Manager version, revision, an
.br
Add a new power policy, or overwrite an existing policy.
-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
+The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
If domain is not supplied a default of platform is used.
@@ -2562,7 +2562,7 @@ If domain is not supplied a default of platform is used.
.br
Add a new inlet temp policy, or overwrite an existing policy.
-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
+The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
If domain is not supplied a default of platform is used.
@@ -2960,7 +2960,7 @@ A list of all entity ids can be found in the IPMI specifications.
Dumps raw SDR data to a file. This data file can then be used as
a local SDR cache of the remote managed system with the \fI\-S <file>\fP
option on the
-.BR ipmitool
+.br ipmitool
command line. This can greatly improve performance
over system interface or remote LAN.
.TP
@@ -3045,7 +3045,7 @@ Print information on the specified SEL Record entry.
Save SEL records to a text file that can be fed back into the
\fIevent file\fP
-.BR ipmitool
+.br ipmitool
command. This can be useful for
testing Event generation by building an appropriate Platform
Event Message file based on existing events. Please see the
@@ -3056,14 +3056,14 @@ the format of this file.
Save SEL records to a file in raw, binary format. This file can
be fed back to the \fIsel readraw\fP
-.BR ipmitool
+.br ipmitool
command for viewing.
.TP
\fIreadraw\fP <\fBfile\fR>
Read and display SEL records from a binary file. Such a file can
be created using the \fIsel writeraw\fP
-.BR ipmitool
+.br ipmitool
command.
.TP
\fItime\fP
@@ -3194,10 +3194,10 @@ Verbosity level.
.RS
This command will launch an interactive shell which you can use
to send multiple
-.BR ipmitool
+.br ipmitool
commands to a BMC and see the responses. This can be useful instead of
running the full
-.BR ipmitool
+.br ipmitool
command each time. Some commands will make use of a Sensor Data Record cache
and you will see marked improvement in speed if these commands
are able to reuse the same cache in a shell session. LAN sessions
@@ -3275,7 +3275,7 @@ by the IPMI over serial channel.
.br
Causes
-.BR ipmitool
+.br ipmitool
to enter Serial Over LAN
mode, and is only available when using the lanplus
interface. An RMCP+ connection is made to the BMC,
@@ -3568,7 +3568,7 @@ Determine whether a password has been stored as 16 or 20 bytes.
.SH "OPEN INTERFACE"
The
-.BR ipmitool
+.br ipmitool
\fIopen\fP interface utilizes the OpenIPMI
kernel device driver. This driver is present in all modern
2.4 and all 2.6 kernels and it should be present in recent
@@ -3579,7 +3579,7 @@ the OpenIPMI homepage.
The required kernel modules is different for 2.4 and 2.6
kernels. The following kernel modules must be loaded on
a 2.4\-based kernel in order for
-.BR ipmitool
+.br ipmitool
to work:
.TP
.B ipmi_msghandler
@@ -3593,7 +3593,7 @@ Linux character device interface for the message handler.
.LP
The following kernel modules must be loaded on
a 2.6\-based kernel in order for
-.BR ipmitool
+.br ipmitool
to work:
.TP
.B ipmi_msghandler
@@ -3622,12 +3622,12 @@ entry with:
.I mknod /dev/ipmi0 c 254 0
-.BR ipmitool
+.br ipmitool
includes some sample initialization scripts that
can perform this task automatically at start\-up.
In order to have
-.BR ipmitool
+.br ipmitool
use the OpenIPMI device interface
you can specify it on the command line:
.PP
@@ -3652,16 +3652,16 @@ The following files are associated with the bmc driver:
Character device node used to communicate with the bmc driver.
.SH "LIPMI INTERFACE"
The
-.BR ipmitool
+.br ipmitool
\fIlipmi\fP interface uses the Solaris 9 IPMI kernel device driver.
It has been superceeded by the \fIbmc\fP interface on Solaris 10. You can tell
-.BR ipmitool
+.br ipmitool
to use this interface by specifying it on the command line.
> ipmitool \fB\-I\fR \fIlipmi\fP <\fIexpression\fP>
.SH "LAN INTERFACE"
The
-.BR ipmitool
+.br ipmitool
\fIlan\fP interface communicates with the BMC
over an Ethernet LAN connection using UDP under IPv4. UDP
datagrams are formatted to contain IPMI request/response
@@ -3676,12 +3676,12 @@ The LAN interface is an authentication multi\-session connection;
messages delivered to the BMC can (and should) be authenticated
with a challenge/response protocol with either straight
password/key or MD5 message\-digest algorithm.
-.BR ipmitool
+.br ipmitool
will attempt to connect with administrator privilege level as this
is required to perform chassis power functions.
You can tell
-.BR ipmitool
+.br ipmitool
to use the lan interface with the
\fB\-I\fR \fIlan\fP option:
@@ -3692,7 +3692,7 @@ to use the lan interface with the
A hostname must be given on the command line in order to use the
lan interface with \fBipmitool\fR. The password field is optional;
if you do not provide a password on the command line,
-.BR ipmitool
+.br ipmitool
will attempt to connect without authentication. If you specify a
password it will use MD5 authentication if supported by the BMC
and straight password/key otherwise, unless overridden with a
@@ -3706,14 +3706,14 @@ specification. RMCP+ allows for improved authentication and data
integrity checks, as well as encryption and the ability to carry
multiple types of payloads. Generic Serial Over LAN support
requires RMCP+, so the
-.BR ipmitool
+.br ipmitool
\fIsol activate\fP command
requires the use of the \fIlanplus\fP interface.
RMCP+ session establishment uses a symmetric challenge\-response
protocol called RAKP (\fBRemote Authenticated Key\-Exchange Protocol\fR)
which allows the negotiation of many options.
-.BR ipmitool
+.br ipmitool
does not
yet allow the user to specify the value of every option, defaulting
to the most obvious settings marked as required in the v2.0
@@ -3721,14 +3721,14 @@ specification. Authentication and integrity HMACS are produced with
SHA1, and encryption is performed with AES\-CBC\-128. Role\-level logins
are not yet supported.
-.BR ipmitool
+.br ipmitool
must be linked with the \fIOpenSSL\fP library in order to
perform the encryption functions and support the \fIlanplus\fP
interface. If the required packages are not found it will not be
compiled in and supported.
You can tell
-.BR ipmitool
+.br ipmitool
to use the lanplus interface with the
\fB\-I\fR \fIlanplus\fP option:
@@ -3749,17 +3749,17 @@ and encryption algorithms to use for for \fIlanplus\fP session based
on the cipher suite ID found in the IPMIv2.0 specification in table
22\-20. The default cipher suite is \fI17\fP which specifies
RAKP\-HMAC\-SHA256 authentication, HMAC\-SHA256\-128 integrity, and
-AES\-CBC\-128 encryption algorightms.
+AES\-CBC\-128 encryption algorithms.
.SH "FREE INTERFACE"
.LP
The
-.BR ipmitool
+.br ipmitool
\fIfree\fP interface utilizes the FreeIPMI libfreeipmi
drivers.
.LP
You can tell
-.BR ipmitool
+.br ipmitool
to use the FreeIPMI interface with the \-I option:
.PP
> ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
@@ -3768,12 +3768,12 @@ to use the FreeIPMI interface with the \-I option:
.SH "IMB INTERFACE"
.LP
The
-.BR ipmitool
+.br ipmitool
\fIimb\fP interface supports the Intel IMB (Intel
Inter-module Bus) Interface through the /dev/imb device.
.LP
You can tell
-.BR ipmitool
+.br ipmitool
to use the IMB interface with the \-I option:
.PP
> ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>