path: root/contrib/bmclanconf

#!/bin/bash
#
# Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 
# Redistribution of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 
# Redistribution in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 
# Neither the name of Sun Microsystems, Inc. or the names of
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
# 
# This software is provided "AS IS," without a warranty of any kind.
# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.


# This script is designed for Sun Fire LX50, V60x and V65x systems.
# It may work with other setups as long as you use the correct channel
# and interface settings.  It can be used on the V20z as long as you
# specify network settings on the command line.
#
# If the wrong channel is used you could lose network access to the
# box because your BMC will be sending out bad Gratuitous ARP packets
# with the wrong MAC address.  You will need to use a console or
# override your local ARP cache with the correct addr.

usage ()
{
    echo "
usage: $0 -c <chan> -i <interface> [options]
       $0 -c <chan> [-v|w|x|y|z address] [options]

    -c channel     Which BMC channel to configure [-c help for more info]
    -i interface   Auto-configure BMC based on interface network settings
    -v address     Use specified IP address
    -w address     Use specified Netmask address
    -x address     Use specified MAC address
    -y address     Use specified Gateway IP address
    -z address     Use specified Gateway MAC address
    -m interface   Which IPMI interface to use [default linux=open solaris=lipmi]
    -p password    Set BMC channel password
    -s string      Set SNMP community string
    -a interval    Set Gratuitous ARP interval, off=0, default=4
    -r             Reset BMC channel, zero all network settings, disable
    -d             Debug mode, does not make any changes
"
    exit 0;
}

channel_usage ()
{
    echo "
 Sun Fire V60x and V65x - Linux 2.4
   eth0 = channel 6, top
   eth1 = channel 7, bottom

 Sun Fire V60x and V65x - Linux 2.6
   eth0 = channel 7, bottom
   eth1 = channel 6, top

 Sun Fire V60x and V65x - Solaris x86
   e1000g0 = channel 7, bottom
   e1000g1 = channel 6, top

 Sun LX50 - Linux
   eth0 = channel 7, bottom
   eth1 = channel 6, top

 Sun LX50 - Solaris x86
   le0 = channel 7, bottom
   le1 = channel 6, top

 Sun Fire V20z (-i option does not apply)
   channel 1
"
    exit 0
}

hex_to_ip ()
{
    test $# -ge 1 || return;
    local HEX B1 B2 B3 B4;
    HEX=`echo $1 | tr '[:lower:]' '[:upper:]'`;
    H1=`echo $HEX | cut -c1-2`
    H2=`echo $HEX | cut -c3-4`
    H3=`echo $HEX | cut -c5-6`
    H4=`echo $HEX | cut -c7-8`
    B1=`echo 10 o 16 i $H1 p | dc`
    B2=`echo 10 o 16 i $H2 p | dc`
    B3=`echo 10 o 16 i $H3 p | dc`
    B4=`echo 10 o 16 i $H4 p | dc`
    echo "$B1.$B2.$B3.$B4"
}

ipmitool_lan_set ()
{
    [ $# -lt 1 ] && return
    local PARAM=$1
    local VALUE=
    [ $# -ge 2 ] && VALUE=$2

    if [ $DEBUG -gt 0 ]; then
	echo "Setting LAN parameter $PARAM $VALUE"
	echo "$IPMITOOL -I $IPMIINTF lan set $CHANNEL $PARAM $VALUE"
	return
    fi

    $IPMITOOL -I $IPMIINTF lan set $CHANNEL $PARAM $VALUE
}

ipmitool_lan_reset ()
{
    ipmitool_lan_set "ipsrc" "static"
    ipmitool_lan_set "ipaddr" "0.0.0.0"
    ipmitool_lan_set "netmask" "0.0.0.0"
    ipmitool_lan_set "macaddr" "00:00:00:00:00:00"
    ipmitool_lan_set "defgw ipaddr" "0.0.0.0"
    ipmitool_lan_set "defgw macaddr" "00:00:00:00:00:00"
    ipmitool_lan_set "password"
    ipmitool_lan_set "snmp" "public"
    ipmitool_lan_set "arp generate" "off"
    ipmitool_lan_set "access" "off"
    exit 0
}

DEBUG=0
LINUX=0
SOLARIS=0
CHANNEL=0
IFACE=
PASSWORD=
SNMP=
GRATARP=8
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin

case `uname -s` in
    Linux)
	IPMIINTF=open
	IPMITOOL=ipmitool
	PING=ping
	IFCONFIG=ifconfig
	ARP=arp
	ROUTE=route
	;;
    SunOS)
	IPMIINTF=lipmi
	IPMITOOL=ipmiadm
	PING=ping
	IFCONFIG=ifconfig
	ARP=arp
	ROUTE=route
	;;
    *)
	echo "Invalid OS!"
	exit 1
esac

while getopts "dhri:c:m:p:s:a:v:w:x:y:z:" OPTION ; do
    case "$OPTION" in
	i) IFACE=$OPTARG ;;
	c) CHANNEL=$OPTARG ; test X$CHANNEL = Xhelp && channel_usage ;;
	m) IPMIINTF=$OPTARG ;;
	p) PASSWORD=$OPTARG ;;
	s) SNMP=$OPTARG ;;
	a) GRATARP=$OPTARG ;;
	d) DEBUG=1 ;;
	v) IP_ADDRESS=$OPTARG ;;
	w) IP_NETMASK=$OPTARG ;;
	x) MAC_ADDRESS=$OPTARG ;;
	y) GATEWAY_IP=$OPTARG ;;
	z) GATEWAY_MAC=$OPTARG ;;
	r) ipmitool_lan_reset ;;
	h) usage ;;
	*) echo "Ignoring invalid option : -$OPTARG" ;;
    esac
done

if [ ! -x `which $IPMITOOL` ]; then
    echo "Error: unable to find $IPMITOOL"
    exit 1
fi

if [ $CHANNEL -eq 0 ]; then
    echo
    echo "Error: you must specify a channel with -c"
    echo
    exit 1
fi

if [ "$IFACE" ]; then
    if ! $IFCONFIG $IFACE 2>/dev/null | grep "inet " >/dev/null 2>&1 ; then
	echo
	echo "Error: unable to find interface $IFACE"
	echo
	exit 1
    fi
    echo "Auto-configuring $IFACE (channel $CHANNEL)"
fi

case `uname -s` in
    SunOS)
	if [ X$IFACE != X ]; then
	    if [ X$IP_ADDRESS = X ]; then
		IP_ADDRESS=`$IFCONFIG $IFACE | grep inet | awk '{print $2}'`
	    fi
	    if [ X$IP_NETMASK = X ]; then
		HEX_NETMASK=`$IFCONFIG $IFACE | grep netmask | awk '{print $4}'`
		IP_NETMASK=`hex_to_ip $HEX_NETMASK`
	    fi
	    if [ X$MAC_ADDRESS = X ]; then
		MAC_ADDRESS=`$IFCONFIG $IFACE | grep ether | awk '{print $2}'`
	    fi
	    if [ X$GATEWAY_IP = X ]; then
		GATEWAY_IP=`$ROUTE -n get default | grep gateway: | awk '{print $2}'`
	    fi
	    if [ X$GATEWAY_MAC = X ]; then
		$PING -i $IFACE $GATEWAY_IP 1 >/dev/null 2>&1
		GATEWAY_MAC=`$ARP $GATEWAY_IP | awk '{print $4}'`
		if [ X$GATEWAY_MAC = Xno ]; then
		    GATEWAY_MAC=
		fi
	    fi
	fi
	;;

    Linux)
	if [ X$IFACE != X ]; then
	    if [ X$IP_ADDRESS = X ]; then
		IP_ADDRESS=`$IFCONFIG $IFACE | grep "inet addr" | awk -F"[:[:space:]]+" '{print $4}'`
	    fi
	    if [ X$IP_NETMASK = X ]; then
		IP_NETMASK=`$IFCONFIG $IFACE | grep Bcast | awk -F"[:[:space:]]+" '{print $8}'`
	    fi
	    if [ X$MAC_ADDRESS = X ]; then
		MAC_ADDRESS=`$IFCONFIG $IFACE | grep HWaddr | awk '{print $5}'`
	    fi
	    if [ X$GATEWAY_IP = X ]; then
		GATEWAY_IP=`$ROUTE -n | awk '/^0.0.0.0/ {print $2}'`
	    fi
	    if [ X$GATEWAY_MAC = X ]; then
		$PING -q -c1 $GATEWAY_IP >/dev/null 2>&1
		GATEWAY_MAC=`$ARP -an | grep "$GATEWAY_IP[^0-9]" | awk '{print $4}'`
	    fi
	fi
	;;
esac

if [ X$IP_ADDRESS != X ]; then
    ipmitool_lan_set "ipsrc" "static"
    ipmitool_lan_set "ipaddr" "$IP_ADDRESS"
fi

if [ X$IP_NETMASK != X ]; then
    ipmitool_lan_set "netmask" "$IP_NETMASK"
fi

if [ X$MAC_ADDRESS != X ]; then
    ipmitool_lan_set "macaddr" "$MAC_ADDRESS"
fi

if [ X$GATEWAY_IP != X ]; then
    ipmitool_lan_set "defgw ipaddr" "$GATEWAY_IP"
fi

if [ X$GATEWAY_MAC != X ]; then
    ipmitool_lan_set "defgw macaddr" "$GATEWAY_MAC"
fi

if [ X$PASSWORD != X ]; then
    ipmitool_lan_set "password" "$PASSWORD"
fi

if [ X$SNMP != X ]; then
    ipmitool_lan_set "snmp" "$SNMP"
fi

if [ "$GRATARP" -ne 0 ]; then
    ipmitool_lan_set "arp generate" "on"
    ipmitool_lan_set "arp interval" "$GRATARP"
else
    ipmitool_lan_set "arp generate" "off"
fi

echo "Setting channel authentication capabilities"
ipmitool_lan_set "auth callback,user,operator,admin" "md2,md5"

echo "Enabling channel $CHANNEL"
ipmitool_lan_set "access" "on"
ipmitool_lan_set "user"

exit 0