path: root/debian/patches/0620-manpage_typo.patch

Description: Fix man page typos
Author: Jörg Frings-Fürst <debian@jff.email>
Forwarded: not-needed
Last-Update: 2022-10-29
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: trunk/doc/ipmitool.1.in
===================================================================
--- trunk.orig/doc/ipmitool.1.in
+++ trunk/doc/ipmitool.1.in
@@ -3,7 +3,7 @@
 ipmitool \- utility for controlling IPMI\-enabled devices
 .SH "SYNOPSIS"
 
-.BR ipmitool
+.br ipmitool
 [ <options> ] <command> [ <sub-commands and sub-options> ]
 
 <options>           := [ <general-options> | <conditional-opts> ]
@@ -68,7 +68,7 @@ On Solaris this driver is called \fIBMC\
 Management of a remote station requires the IPMI\-over\-LAN interface to be
 enabled and configured.  Depending on the particular requirements of each
 system it may be possible to enable the LAN interface using
-.BR ipmitool
+.br ipmitool
 over the system interface.
 .SH "OPTIONS"
 .TP 
@@ -102,7 +102,7 @@ IPMI v2.0 specification. The default is
 authentication, HMAC\-SHA256\-128 integrity, and AES\-CBC\-128 encryption algorithms.
 
 NOTE: In
-.BR ipmitool
+.br ipmitool
 1.8.18 and earlier the default was 3, which was insecure and was not supported
 by some more recent BMC implementations.
 .TP 
@@ -242,7 +242,7 @@ Change Size of Communication Channel. (O
 
 .LP 
 If no password method is specified then
-.BR ipmitool
+.br ipmitool
 will prompt the user for a password. If no password is entered at the prompt,
 the remote server password will default to NULL.
 .SH "SECURITY"
@@ -267,17 +267,17 @@ local station.
 For IPMI v1.5, the maximum password length is 16 characters; longer
 passwords might be truncated or rejected by the server, or rejected
 by
-.BR ipmitool .
+.br ipmitool .
 
 For IPMI v2.0, the maximum password length is 20 characters; longer
 passwords will be rejected by
-.BR ipmitool .
+.br ipmitool .
 
 .SH "COMMANDS"
 .TP 
 \fIhelp\fP
 This can be used to get command\-line help on 
-.BR ipmitool
+.br ipmitool
 commands. It may also be placed at the end of commands to get option usage help.
 
 > ipmitool help
@@ -1223,7 +1223,7 @@ Get a list of all the possible Sensor St
 Shortcuts available for a particular sensor.   \fBsensorid\fR is the character 
 string representation of the sensor and must be enclosed in double quotes
 if it includes white space.  Several different commands including 
-.BR ipmitool
+.br ipmitool
 \fIsensor list\fP may be used to obtain a list that includes 
 the \fBsensorid\fR strings representing the sensors on a given system. 
 .RS
@@ -1287,7 +1287,7 @@ Finding sensor PS 2T Fan Fault... ok
 
 .RS
 Execute
-.BR ipmitool
+.br ipmitool
 commands from \fIfilename\fR.  Each line is a
 complete command.  The syntax of the commands are defined by the
 COMMANDS section in this manpage.  Each line may have an optional
@@ -1698,7 +1698,7 @@ user, operator, admin, oem.
 .br
 
 Causes
-.BR ipmitool
+.br ipmitool
 to enter Intel IPMI v1.5 Serial Over LAN mode. An RMCP+
 connection is made to the BMC, the terminal is set to raw mode, and user
 input is sent to the serial console on the remote server. On exit, 
@@ -1752,7 +1752,7 @@ Select the next boot order on the Kontro
 
 These commands will allow you to configure IPMI LAN channels
 with network information so they can be used with the
-..BR ipmitool
+.br ipmitool
 \fIlan\fP and \fIlanplus\fP interfaces.  \fINOTE\fR: To
 determine on which channel the LAN interface is located, issue
 the `channel info \fInumber\fR' command until you come across
@@ -2035,7 +2035,7 @@ Display the Management Controller Global
 .br
 
 This is the default behavior for
-.BR ipmitool (1).
+.br ipmitool (1).
 
 Try to automatically detect the encoding based on the value of the
 version field and (for version 1) the timestamp. The version is
@@ -2049,11 +2049,11 @@ neither one has that, then the precedenc
 \fIsmbios\fP, \fIipmi\fP, \fIrfc4122\fP.
 
 If neither encoding yields a valid version field, then
-.BR ipmitool (1)
+.br ipmitool (1)
 defaults to \fIdump\fP mode.
 
 If this option is in use, then
-.BR ipmitool (1)
+.br ipmitool (1)
 will also print out the detected encoding and warn
 regarding IPMI specification violation if the encoding isn't \fIipmi\fP.
 
@@ -2551,7 +2551,7 @@ Discover Node Manager presence as well a
 .br
 
 Add a new power policy, or overwrite an existing policy.
-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
+The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
 The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
 The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
 If domain is not supplied a default of platform is used.
@@ -2562,7 +2562,7 @@ If domain is not supplied a default of p
 .br
 
 Add a new inlet temp policy, or overwrite an existing policy.
-The \fIcorrection\fP parameter is the agressiveness of frequency limiting, default is auto.
+The \fIcorrection\fP parameter is the aggressiveness of frequency limiting, default is auto.
 The \fItrig_lim\fP is the correction time limit and must be at least 6000 and not greater than 65535.
 The \fIstats\fP setting is the averaging period in seconds and ranges from 1-65535.
 If domain is not supplied a default of platform is used.
@@ -2960,7 +2960,7 @@ A list of all entity ids can be found in
 Dumps raw SDR data to a file.  This data file can then be used as
 a local SDR cache of the remote managed system with the \fI\-S <file>\fP
 option on the
-.BR ipmitool
+.br ipmitool
 command line.  This can greatly improve performance
 over system interface or remote LAN.
 .TP 
@@ -3045,7 +3045,7 @@ Print information on the specified SEL R
 
 Save SEL records to a text file that can be fed back into the
 \fIevent file\fP
-.BR ipmitool
+.br ipmitool
 command. This can be useful for
 testing Event generation by building an appropriate Platform
 Event Message file based on existing events.  Please see the
@@ -3056,14 +3056,14 @@ the format of this file.
 
 Save SEL records to a file in raw, binary format.  This file can
 be fed back to the \fIsel readraw\fP
-.BR ipmitool
+.br ipmitool
 command for viewing.
 .TP 
 \fIreadraw\fP <\fBfile\fR>
 
 Read and display SEL records from a binary file.  Such a file can
 be created using the \fIsel writeraw\fP
-.BR ipmitool
+.br ipmitool
 command.
 .TP          
 \fItime\fP
@@ -3194,10 +3194,10 @@ Verbosity level.
 .RS
 This command will launch an interactive shell which you can use
 to send multiple 
-.BR ipmitool
+.br ipmitool
 commands to a BMC and see the responses. This can be useful instead of
 running the full
-.BR ipmitool
+.br ipmitool
 command each time. Some commands will make use of a Sensor Data Record cache
 and you will see marked improvement in speed if these commands
 are able to reuse the same cache in a shell session.  LAN sessions
@@ -3275,7 +3275,7 @@ by the IPMI over serial channel.
 .br 
 
 Causes
-.BR ipmitool
+.br ipmitool
 to enter Serial Over LAN
 mode, and is only available when using the lanplus
 interface.  An RMCP+ connection is made to the BMC,
@@ -3568,7 +3568,7 @@ Determine whether a password has been st
 
 .SH "OPEN INTERFACE"
 The
-.BR ipmitool
+.br ipmitool
 \fIopen\fP interface utilizes the OpenIPMI
 kernel device driver.  This driver is present in all modern
 2.4 and all 2.6 kernels and it should be present in recent
@@ -3579,7 +3579,7 @@ the OpenIPMI homepage.
 The required kernel modules is different for 2.4 and 2.6
 kernels.  The following kernel modules must be loaded on
 a 2.4\-based kernel in order for
-.BR ipmitool
+.br ipmitool
 to work:
 .TP 
 .B ipmi_msghandler
@@ -3593,7 +3593,7 @@ Linux character device interface for the
 .LP 
 The following kernel modules must be loaded on
 a 2.6\-based kernel in order for
-.BR ipmitool
+.br ipmitool
 to work:
 .TP 
 .B ipmi_msghandler
@@ -3622,12 +3622,12 @@ entry with:
 
 .I mknod /dev/ipmi0 c 254 0
 
-.BR ipmitool
+.br ipmitool
 includes some sample initialization scripts that
 can perform this task automatically at start\-up.
 
 In order to have
-.BR ipmitool
+.br ipmitool
 use the OpenIPMI device interface
 you can specify it on the command line:
 .PP 
@@ -3652,16 +3652,16 @@ The following files are associated with
 Character device node used to communicate with the bmc driver.
 .SH "LIPMI INTERFACE"
 The
-.BR ipmitool
+.br ipmitool
 \fIlipmi\fP interface uses the Solaris 9 IPMI kernel device driver.
 It has been superceeded by the \fIbmc\fP interface on Solaris 10.  You can tell
-.BR ipmitool
+.br ipmitool
 to use this interface by specifying it on the command line.
 
 > ipmitool \fB\-I\fR \fIlipmi\fP <\fIexpression\fP>
 .SH "LAN INTERFACE"
 The
-.BR ipmitool
+.br ipmitool
 \fIlan\fP interface communicates with the BMC
 over an Ethernet LAN connection using UDP under IPv4.  UDP
 datagrams are formatted to contain IPMI request/response 
@@ -3676,12 +3676,12 @@ The LAN interface is an authentication m
 messages delivered to the BMC can (and should) be authenticated
 with a challenge/response protocol with either straight
 password/key or MD5 message\-digest algorithm.
-.BR ipmitool
+.br ipmitool
 will attempt to connect with administrator privilege level as this
 is required to perform chassis power functions.
 
 You can tell
-.BR ipmitool
+.br ipmitool
 to use the lan interface with the
 \fB\-I\fR \fIlan\fP option:
 
@@ -3692,7 +3692,7 @@ to use the lan interface with the
 A hostname must be given on the command line in order to use the 
 lan interface with \fBipmitool\fR. The password field is optional;
 if you do not provide a password on the command line,
-.BR ipmitool
+.br ipmitool
 will attempt to connect without authentication.  If you specify a 
 password it will use MD5 authentication if supported by the BMC
 and straight password/key otherwise, unless overridden with a
@@ -3706,14 +3706,14 @@ specification.  RMCP+ allows for improve
 integrity checks, as well as encryption and the ability to carry
 multiple types of payloads.  Generic Serial Over LAN support 
 requires RMCP+, so the
-.BR ipmitool
+.br ipmitool
 \fIsol activate\fP command
 requires the use of the \fIlanplus\fP interface.
 
 RMCP+ session establishment uses a symmetric challenge\-response
 protocol called RAKP (\fBRemote Authenticated Key\-Exchange Protocol\fR)
 which allows the negotiation of many options.
-.BR ipmitool
+.br ipmitool
 does not
 yet allow the user to specify the value of every option, defaulting
 to the most obvious settings marked as required in the v2.0 
@@ -3721,14 +3721,14 @@ specification.  Authentication and integ
 SHA1, and encryption is performed with AES\-CBC\-128.  Role\-level logins
 are not yet supported.
 
-.BR ipmitool
+.br ipmitool
 must be linked with the \fIOpenSSL\fP library in order to
 perform the encryption functions and support the \fIlanplus\fP
 interface.  If the required packages are not found it will not be
 compiled in and supported.
 
 You can tell
-.BR ipmitool
+.br ipmitool
 to use the lanplus interface with the
 \fB\-I\fR \fIlanplus\fP option:
 
@@ -3749,17 +3749,17 @@ and encryption algorithms to use for for
 on the cipher suite ID found in the IPMIv2.0 specification in table
 22\-20.  The default cipher suite is \fI17\fP which specifies
 RAKP\-HMAC\-SHA256 authentication, HMAC\-SHA256\-128 integrity, and 
-AES\-CBC\-128 encryption algorightms.
+AES\-CBC\-128 encryption algorithms.
 
 .SH "FREE INTERFACE"
 .LP
 The
-.BR ipmitool
+.br ipmitool
 \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
 drivers.  
 .LP
 You can tell
-.BR ipmitool
+.br ipmitool
 to use the FreeIPMI interface with the \-I option:
 .PP
 > ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
@@ -3768,12 +3768,12 @@ to use the FreeIPMI interface with the \
 .SH "IMB INTERFACE"
 .LP
 The
-.BR ipmitool
+.br ipmitool
 \fIimb\fP interface supports the Intel IMB (Intel
 Inter-module Bus) Interface through the /dev/imb device.  
 .LP
 You can tell
-.BR ipmitool
+.br ipmitool
 to use the IMB interface with the \-I option:
 .PP
 > ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>
Index: trunk/doc/ipmievd.8.in
===================================================================
--- trunk.orig/doc/ipmievd.8.in
+++ trunk/doc/ipmievd.8.in
@@ -56,7 +56,7 @@ This is not available with all commands.
 The remote server authentication, integrity, and encryption algorithms
 to use for IPMIv2 \fIlanplus\fP connections.  See table 22\-19 in the
 IPMIv2 specification.  The default is 3 which specifies RAKP\-HMAC\-SHA1 
-authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorightms.
+authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorithms.
 .TP 
 \fB\-E\fR
 The remote server password is specified by the environment