diff options
Diffstat (limited to 'distro/rpm')
| -rw-r--r-- | distro/rpm/Makefile.am | 18 | ||||
| -rw-r--r-- | distro/rpm/Makefile.in | 530 | ||||
| -rwxr-xr-x | distro/rpm/openvpn.init.d.rhel | 244 | ||||
| -rw-r--r-- | distro/rpm/openvpn.init.d.suse | 264 | ||||
| -rw-r--r-- | distro/rpm/openvpn.spec | 248 | ||||
| -rw-r--r-- | distro/rpm/openvpn.spec.in | 248 |
6 files changed, 0 insertions, 1552 deletions
diff --git a/distro/rpm/Makefile.am b/distro/rpm/Makefile.am deleted file mode 100644 index d16a5ac..0000000 --- a/distro/rpm/Makefile.am +++ /dev/null @@ -1,18 +0,0 @@ -# -# OpenVPN -- An application to securely tunnel IP networks -# over a single UDP port, with support for SSL/TLS-based -# session authentication and key exchange, -# packet encryption, packet authentication, and -# packet compression. -# -# Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net> -# Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com> -# - -MAINTAINERCLEANFILES = \ - $(srcdir)/Makefile.in - -dist_noinst_DATA = \ - openvpn.spec \ - openvpn.init.d.rhel \ - openvpn.init.d.suse diff --git a/distro/rpm/Makefile.in b/distro/rpm/Makefile.in deleted file mode 100644 index 9a71d31..0000000 --- a/distro/rpm/Makefile.in +++ /dev/null @@ -1,530 +0,0 @@ -# Makefile.in generated by automake 1.16.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2018 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# OpenVPN -- An application to securely tunnel IP networks -# over a single UDP port, with support for SSL/TLS-based -# session authentication and key exchange, -# packet encryption, packet authentication, and -# packet compression. -# -# Copyright (C) 2002-2018 OpenVPN Inc <sales@openvpn.net> -# Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com> -# - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = distro/rpm -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ - $(top_srcdir)/m4/ax_socklen_t.m4 \ - $(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \ - $(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(dist_noinst_DATA) \ - $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/include/openvpn-plugin.h -CONFIG_CLEAN_FILES = openvpn.spec -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -DATA = $(dist_noinst_DATA) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/openvpn.spec.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CMAKE = @CMAKE@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DL_LIBS = @DL_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GIT = @GIT@ -GREP = @GREP@ -IFCONFIG = @IFCONFIG@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -IPROUTE = @IPROUTE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBPAM_CFLAGS = @LIBPAM_CFLAGS@ -LIBPAM_LIBS = @LIBPAM_LIBS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -LZ4_CFLAGS = @LZ4_CFLAGS@ -LZ4_LIBS = @LZ4_LIBS@ -LZO_CFLAGS = @LZO_CFLAGS@ -LZO_LIBS = @LZO_LIBS@ -MAKEINFO = @MAKEINFO@ -MAN2HTML = @MAN2HTML@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MBEDTLS_CFLAGS = @MBEDTLS_CFLAGS@ -MBEDTLS_LIBS = @MBEDTLS_LIBS@ -MKDIR_P = @MKDIR_P@ -NETSTAT = @NETSTAT@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ -OPENSSL_LIBS = @OPENSSL_LIBS@ -OPENVPN_VERSION_MAJOR = @OPENVPN_VERSION_MAJOR@ -OPENVPN_VERSION_MINOR = @OPENVPN_VERSION_MINOR@ -OPENVPN_VERSION_PATCH = @OPENVPN_VERSION_PATCH@ -OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@ -OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@ -OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@ -OPTIONAL_LZ4_CFLAGS = @OPTIONAL_LZ4_CFLAGS@ -OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@ -OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@ -OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@ -OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@ -OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@ -OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@ -OPTIONAL_SYSTEMD_LIBS = @OPTIONAL_SYSTEMD_LIBS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -P11KIT_CFLAGS = @P11KIT_CFLAGS@ -P11KIT_LIBS = @P11KIT_LIBS@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@ -PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -PLUGINDIR = @PLUGINDIR@ -PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@ -PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@ -RANLIB = @RANLIB@ -RC = @RC@ -ROUTE = @ROUTE@ -SED = @SED@ -SELINUX_LIBS = @SELINUX_LIBS@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SOCKETS_LIBS = @SOCKETS_LIBS@ -STRIP = @STRIP@ -SYSTEMD_ASK_PASSWORD = @SYSTEMD_ASK_PASSWORD@ -SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@ -TAP_CFLAGS = @TAP_CFLAGS@ -TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@ -TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@ -TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@ -TEST_CFLAGS = @TEST_CFLAGS@ -TEST_LDFLAGS = @TEST_LDFLAGS@ -TMPFILES_DIR = @TMPFILES_DIR@ -VENDOR_BUILD_ROOT = @VENDOR_BUILD_ROOT@ -VENDOR_DIST_ROOT = @VENDOR_DIST_ROOT@ -VENDOR_SRC_ROOT = @VENDOR_SRC_ROOT@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -libsystemd_CFLAGS = @libsystemd_CFLAGS@ -libsystemd_LIBS = @libsystemd_LIBS@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -plugindir = @plugindir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sampledir = @sampledir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -systemdunitdir = @systemdunitdir@ -target_alias = @target_alias@ -tmpfilesdir = @tmpfilesdir@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -MAINTAINERCLEANFILES = \ - $(srcdir)/Makefile.in - -dist_noinst_DATA = \ - openvpn.spec \ - openvpn.init.d.rhel \ - openvpn.init.d.suse - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign distro/rpm/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign distro/rpm/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -openvpn.spec: $(top_builddir)/config.status $(srcdir)/openvpn.spec.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) distdir-am - -distdir-am: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel deleted file mode 100755 index bfde221..0000000 --- a/distro/rpm/openvpn.init.d.rhel +++ /dev/null @@ -1,244 +0,0 @@ -#!/bin/sh -# -# openvpn This shell script takes care of starting and stopping -# openvpn on RedHat or other chkconfig-based system. -# -# chkconfig: 345 24 76 -# -# description: OpenVPN is a robust and highly flexible tunneling application \ -# that uses all of the encryption, authentication, and \ -# certification features of the OpenSSL library to securely \ -# tunnel IP networks over a single UDP port. -# - -# Contributed to the OpenVPN project by -# Douglas Keller <doug@voidstar.dyndns.org> -# 2002.05.15 - -# To install: -# copy this file to /etc/rc.d/init.d/openvpn -# shell> chkconfig --add openvpn -# shell> mkdir /etc/openvpn -# make .conf or .sh files in /etc/openvpn (see below) - -# To uninstall: -# run: chkconfig --del openvpn - -# Author's Notes: -# -# I have created an /etc/init.d init script and enhanced openvpn.spec to -# automatically register the init script. Once the RPM is installed you -# can start and stop OpenVPN with "service openvpn start" and "service -# openvpn stop". -# -# The init script does the following: -# -# - Starts an openvpn process for each .conf file it finds in -# /etc/openvpn. -# -# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes -# it before starting openvpn (useful for doing openvpn --mktun...). -# -# - In addition to start/stop you can do: -# -# service openvpn reload - SIGHUP -# service openvpn reopen - SIGUSR1 -# service openvpn status - SIGUSR2 -# -# Modifications: -# -# 2003.05.02 -# * Changed == to = for sh compliance (Bishop Clark). -# * If condrestart|reload|reopen|status, check that we were -# actually started (James Yonan). -# * Added lock, piddir, and work variables (James Yonan). -# * If start is attempted twice, without an intervening stop, or -# if start is attempted when previous start was not properly -# shut down, then kill any previously started processes, before -# commencing new start operation (James Yonan). -# * Do a better job of flagging errors on start, and properly -# returning success or failure status to caller (James Yonan). -# -# 2005.04.04 -# * Added openvpn-startup and openvpn-shutdown script calls -# (James Yonan). -# - -# Location of openvpn binary -openvpn="" -openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn" -for location in $openvpn_locations -do - if [ -f "$location" ] - then - openvpn=$location - fi -done - -# Lockfile -lock="/var/lock/subsys/openvpn" - -# PID directory -piddir="/var/run/openvpn" - -# Our working directory -work=/etc/openvpn - -# Source function library. -. /etc/rc.d/init.d/functions - -# Source networking configuration. -. /etc/sysconfig/network - -# Check that networking is up. -if [ "${NETWORKING}" = "no" ] -then - echo "Networking is down" - exit 0 -fi - -# Check that binary exists -if ! [ -f $openvpn ] -then - echo "openvpn binary not found" - exit 0 -fi - -# See how we were called. -case "$1" in - start) - echo -n $"Starting openvpn: " - - /sbin/modprobe tun >/dev/null 2>&1 - - # From a security perspective, I think it makes - # sense to remove this, and have users who need - # it explictly enable in their --up scripts or - # firewall setups. - - #echo 1 > /proc/sys/net/ipv4/ip_forward - - # Run startup script, if defined - if [ -f $work/openvpn-startup ]; then - $work/openvpn-startup - fi - - if [ ! -d $piddir ]; then - mkdir $piddir - fi - - if [ -f $lock ]; then - # we were not shut down correctly - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill `cat $pidf` >/dev/null 2>&1 - fi - rm -f $pidf - done - rm -f $lock - sleep 2 - fi - - rm -f $piddir/*.pid - cd $work - - # Start every .conf in $work and run .sh if exists - errors=0 - successes=0 - for c in `/bin/ls *.conf 2>/dev/null`; do - bn=${c%%.conf} - if [ -f "$bn.sh" ]; then - . ./$bn.sh - fi - rm -f $piddir/$bn.pid - $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work - if [ $? = 0 ]; then - successes=1 - else - errors=1 - fi - done - - if [ $errors = 1 ]; then - failure; echo - else - success; echo - fi - - if [ $successes = 1 ]; then - touch $lock - fi - ;; - stop) - echo -n $"Shutting down openvpn: " - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill `cat $pidf` >/dev/null 2>&1 - fi - rm -f $pidf - done - - # Run shutdown script, if defined - if [ -f $work/openvpn-shutdown ]; then - $work/openvpn-shutdown - fi - - success; echo - rm -f $lock - ;; - restart) - $0 stop - sleep 2 - $0 start - ;; - reload) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -HUP `cat $pidf` >/dev/null 2>&1 - fi - done - else - echo "openvpn: service not started" - exit 1 - fi - ;; - reopen) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -USR1 `cat $pidf` >/dev/null 2>&1 - fi - done - else - echo "openvpn: service not started" - exit 1 - fi - ;; - condrestart) - if [ -f $lock ]; then - $0 stop - # avoid race - sleep 2 - $0 start - fi - ;; - status) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -USR2 `cat $pidf` >/dev/null 2>&1 - fi - done - echo "Status written to /var/log/messages" - else - echo "openvpn: service not started" - exit 1 - fi - ;; - *) - echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}" - exit 1 - ;; -esac -exit 0 diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse deleted file mode 100644 index 270024e..0000000 --- a/distro/rpm/openvpn.init.d.suse +++ /dev/null @@ -1,264 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: openvpn -# Required-Start: $network -# Required-Stop: $network -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Short-Description: This shell script takes care of starting and stopping OpenVPN. -# Description: OpenVPN is a robust and highly flexible tunneling application that uses all of the encryption, authentication, and certification features of the OpenSSL library to securely tunnel IP networks over a single UDP port. -### END INIT INFO - -# Contributed to the OpenVPN project by -# Douglas Keller <doug@voidstar.dyndns.org> -# 2002.05.15 - -# Modified for SuSE by -# Frank Plohmann <openvpn@franks-planet.de> -# 2003.08.24 -# Please feel free to contact me if you have problems or suggestions -# using this script. - -# To install: -# copy this file to /etc/rc.d/init.d/openvpn -# use the runlevel editor in Yast to add it to runlevel 3 and/or 5 -# shell> mkdir /etc/openvpn -# make .conf or .sh files in /etc/openvpn (see below) - -# To uninstall: -# use also Yast and the runlevel editor to uninstall - -# Author's Notes: -# -# I have created an /etc/init.d init script and enhanced openvpn.spec to -# automatically register the init script. Once the RPM is installed you -# can start and stop OpenVPN with "service openvpn start" and "service -# openvpn stop". -# -# The init script does the following: -# -# - Starts an openvpn process for each .conf file it finds in -# /etc/openvpn. -# -# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes -# it before starting openvpn (useful for doing openvpn --mktun...). -# -# - In addition to start/stop you can do: -# -# /etc/init.d/openvpn reload - SIGHUP -# /etc/init.d/openvpn reopen - SIGUSR1 -# /etc/init.d/openvpn status - SIGUSR2 - -# Modifications 2003.05.02 -# * Changed == to = for sh compliance (Bishop Clark). -# * If condrestart|reload|reopen|status, check that we were -# actually started (James Yonan). -# * Added lock, piddir, and work variables (James Yonan). -# * If start is attempted twice, without an intervening stop, or -# if start is attempted when previous start was not properly -# shut down, then kill any previously started processes, before -# commencing new start operation (James Yonan). -# * Do a better job of flagging errors on start, and properly -# returning success or failure status to caller (James Yonan). -# -# Modifications 2003.08.24 -# * Converted the script for SuSE Linux distribution. -# Tested with version 8.2 (Frank Plohmann). -# - removed "chkconfig" header -# - added Yast header -# - changed installation notes -# - corrected path to openvpn binary -# - removes sourcing "functions" -# - removed sourcing "network" -# - removed network checking. it seemed not to work with SuSE. -# - added sourcing "rc.status", comments and "rc_reset" command -# - removed "succes; echo" and "failure; echo" lines -# - added "rc_status" lines at the end of each section -# - changed "service" to "/etc/init.d/" in "In addition to start/stop" -# section above. -# -# Modifications 2005.04.04 -# * Added openvpn-startup and openvpn-shutdown script calls (James Yonan). -# - -# Location of openvpn binary -openvpn="/usr/sbin/openvpn" - -# Lockfile -lock="/var/lock/subsys/openvpn" - -# PID directory -piddir="/var/run/openvpn" - -# Our working directory -work=/etc/openvpn - -# Source rc functions -. /etc/rc.status - -# Shell functions sourced from /etc/rc.status: -# rc_check check and set local and overall rc status -# rc_status check and set local and overall rc status -# rc_status -v ditto but be verbose in local rc status -# rc_status -v -r ditto and clear the local rc status -# rc_failed set local and overall rc status to failed -# rc_reset clear local rc status (overall remains) -# rc_exit exit appropriate to overall rc status - -# rc_status check and set local and overall rc status -# rc_status -v ditto but be verbose in local rc status -# rc_status -v -r ditto and clear the local rc status -# rc_failed set local and overall rc status to failed -# rc_reset clear local rc status (overall remains) -# rc_exit exit appropriate to overall rc status - -# First reset status of this service -rc_reset - -[ -f $openvpn ] || exit 0 - -# See how we were called. -case "$1" in - start) - echo -n $"Starting openvpn: " - - /sbin/modprobe tun >/dev/null 2>&1 - - # From a security perspective, I think it makes - # sense to remove this, and have users who need - # it explictly enable in their --up scripts or - # firewall setups. - - #echo 1 > /proc/sys/net/ipv4/ip_forward - - # Run startup script, if defined - if [ -f $work/openvpn-startup ]; then - $work/openvpn-startup - fi - - if [ ! -d $piddir ]; then - mkdir $piddir - fi - - if [ -f $lock ]; then - # we were not shut down correctly - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill `cat $pidf` >/dev/null 2>&1 - fi - rm -f $pidf - done - rm -f $lock - sleep 2 - fi - - rm -f $piddir/*.pid - cd $work - - # Start every .conf in $work and run .sh if exists - errors=0 - successes=0 - for c in `/bin/ls *.conf 2>/dev/null`; do - bn=${c%%.conf} - if [ -f "$bn.sh" ]; then - . ./$bn.sh - fi - rm -f $piddir/$bn.pid - $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work - if [ $? = 0 ]; then - successes=1 - else - errors=1 - fi - done - - if [ $successes = 1 ]; then - touch $lock - fi - - rc_status -v - ;; - stop) - echo -n $"Shutting down openvpn: " - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill `cat $pidf` >/dev/null 2>&1 - fi - rm -f $pidf - done - - # Run shutdown script, if defined - if [ -f $work/openvpn-shutdown ]; then - $work/openvpn-shutdown - fi - - rm -f $lock - - rc_status -v - ;; - restart) - $0 stop - sleep 2 - $0 start - - rc_status - ;; - reload) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -HUP `cat $pidf` >/dev/null 2>&1 - fi - done - else - echo "openvpn: service not started" - exit 1 - fi - - rc_status -v - ;; - reopen) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -USR1 `cat $pidf` >/dev/null 2>&1 - fi - done - else - echo "openvpn: service not started" - exit 1 - fi - - rc_status -v - ;; - condrestart) - if [ -f $lock ]; then - $0 stop - # avoid race - sleep 2 - $0 start - fi - - rc_status - ;; - status) - if [ -f $lock ]; then - for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do - if [ -s $pidf ]; then - kill -USR2 `cat $pidf` >/dev/null 2>&1 - fi - done - echo "Status written to /var/log/messages" - else - echo "openvpn: service not started" - exit 1 - fi - - rc_status -v - ;; - *) - echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}" - exit 1 -esac - -exit 0 diff --git a/distro/rpm/openvpn.spec b/distro/rpm/openvpn.spec deleted file mode 100644 index c0d4354..0000000 --- a/distro/rpm/openvpn.spec +++ /dev/null @@ -1,248 +0,0 @@ -# OpenVPN spec file, used to drive rpmbuild - -# OPTIONS -# -# Disable LZO -# rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1' -# -# Disable PAM plugin -# rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1' -# -# Allow passwords to be read from files -# rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1' - -Summary: OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -Name: openvpn -Version: 2.4.7 -Release: 1 -URL: http://openvpn.net/ -Source0: http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz - -License: GPL -Group: Applications/Internet -Vendor: James Yonan <jim@yonan.net> -Packager: James Yonan <jim@yonan.net> -BuildRoot: %{_tmppath}/%{name}-%(id -un) - -# -# Include dependencies manually -# - -AutoReq: 0 - -BuildRequires: openssl-devel >= 0.9.7 -Requires: openssl >= 0.9.7 - -%if "%{_vendor}" == "Mandrakesoft" -%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07} -%{!?without_lzo:Requires: liblzo1 >= 1.07} -%else -%if "%{_vendor}" == "MandrakeSoft" -%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07} -%{!?without_lzo:Requires: liblzo1 >= 1.07} -%else -%{!?without_lzo:BuildRequires: lzo-devel >= 1.07} -%{!?without_lzo:Requires: lzo >= 1.07} -%endif -%endif - -%{!?without_pam:BuildRequires: pam-devel} -%{!?without_pam:Requires: pam} - -%{?with_pkcs11:BuildRequires: pkcs11-helper-devel} -%{?with_pkcs11:Requires: pkcs11-helper} - -# -# Description -# - -%description -OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -OpenVPN supports SSL/TLS security, -ethernet bridging, -TCP or UDP tunnel transport through proxies or NAT, -support for dynamic IP addresses and DHCP, -scalability to hundreds or thousands of users, -and portability to most major OS platforms. - -%package devel -Summary: OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -Group: Applications/Internet -Requires: %{name} -%description devel -Development support for OpenVPN. - -# -# Define vendor type -# - -%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc" -%define VENDOR SuSE -%else -%define VENDOR %_vendor -%endif - -# -# Other definitions -# - -%define debug_package %{nil} - -# -# Build OpenVPN binary -# - -%prep -%setup -q - -%build -%configure \ - --disable-dependency-tracking \ - --docdir="%{_docdir}/%{name}-%{version}" \ - %{?with_password_save:--enable-password-save} \ - %{!?without_lzo:--enable-lzo} \ - %{?with_pkcs11:--enable-pkcs11} \ - %{?without_pam:--disable-plugin-auth-pam} -%__make - -# -# Installation section -# - -%install -[ %{buildroot} != "/" ] && rm -rf %{buildroot} -%__make install DESTDIR="%{buildroot}" - -# Install init script -%if "%{VENDOR}" == "SuSE" -%__install -c -d -m 755 "%{buildroot}/etc/init.d" -%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}" -%else -%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d" -%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}" -%endif - -# Install /etc/openvpn -%__install -c -d -m 755 "%{buildroot}/etc/%{name}" - -# Install extra %doc stuff -cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \ - "%{buildroot}/%{_docdir}/%{name}-%{version}" - -# -# Clean section -# - -%clean -[ %{buildroot} != "/" ] && rm -rf "%{buildroot}" - -# -# On Linux 2.4, make the device node -# - -%post -case "`uname -r`" in -2.4*) - /bin/mkdir /dev/net >/dev/null 2>&1 - /bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1 - ;; -esac - -# -# Handle the init script -# - -/sbin/chkconfig --add %{name} -%if "%{VENDOR}" == "SuSE" -/etc/init.d/openvpn restart -%else -/sbin/service %{name} condrestart -%endif -%preun -if [ "$1" = 0 ] -then - %if "%{VENDOR}" == "SuSE" - /etc/init.d/openvpn stop - %else - /sbin/service %{name} stop - %endif - /sbin/chkconfig --del %{name} -fi - -# -# Files section -# -# don't use %doc as old rpmbuild removes it[1]. -# [1] http://rpm.org/ticket/836 - -%files -%defattr(-,root,root) -%{_mandir} -%{_sbindir}/%{name} -%{_libdir}/%{name} -%{_docdir}/%{name}-%{version} -%dir /etc/%{name} -%if "%{VENDOR}" == "SuSE" -/etc/init.d/%{name} -%else -/etc/rc.d/init.d/%{name} -%endif - -%files devel -%defattr(-,root,root) -%{_includedir}/* - -%changelog -* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net> -- Removed management/ directory from %doc - -* Thu Dec 14 2006 Alon Bar-Lev -- Added with_pkcs11 - -* Mon Aug 2 2005 James Yonan -- Fixed build problem with --define 'without_pam 1' - -* Mon Apr 4 2005 James Yonan -- Moved some files from /usr/share/openvpn to %doc for compatibility - with Dag Wieers' RPM repository - -* Sat Mar 12 2005 Tom Walsh -- Added MandrakeSoft liblzo1 require - -* Fri Dec 10 2004 James Yonan -- Added AutoReq: 0 for manual dependencies - -* Fri Dec 10 2004 James Yonan -- Packaged the plugins - -* Sun Nov 7 2004 Umberto Nicoletti -- SuSE support - -* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca> -- restrict what we claim in /etc/ to avoid ownership conflicts - -* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1. -- Have the version number filled in by autoconf. - -* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1 -- Fixed %preun to only remove service on final uninstall - -* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1 -- Added condrestart to openvpn.spec & openvpn.init. - -* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1 -- Added mknod for Linux 2.4. - -* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2 -- Added init scripts -- Added conf file support - -* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1 -- Added new directories for config examples and such - -* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1 -- Updated buildroot directive and cleanup command -- added easy-rsa utilities - -* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1 -- Initial build. diff --git a/distro/rpm/openvpn.spec.in b/distro/rpm/openvpn.spec.in deleted file mode 100644 index 20a8c89..0000000 --- a/distro/rpm/openvpn.spec.in +++ /dev/null @@ -1,248 +0,0 @@ -# OpenVPN spec file, used to drive rpmbuild - -# OPTIONS -# -# Disable LZO -# rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1' -# -# Disable PAM plugin -# rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1' -# -# Allow passwords to be read from files -# rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1' - -Summary: OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -Name: @PACKAGE@ -Version: @VERSION@ -Release: 1 -URL: http://openvpn.net/ -Source0: http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz - -License: GPL -Group: Applications/Internet -Vendor: James Yonan <jim@yonan.net> -Packager: James Yonan <jim@yonan.net> -BuildRoot: %{_tmppath}/%{name}-%(id -un) - -# -# Include dependencies manually -# - -AutoReq: 0 - -BuildRequires: openssl-devel >= 0.9.7 -Requires: openssl >= 0.9.7 - -%if "%{_vendor}" == "Mandrakesoft" -%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07} -%{!?without_lzo:Requires: liblzo1 >= 1.07} -%else -%if "%{_vendor}" == "MandrakeSoft" -%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07} -%{!?without_lzo:Requires: liblzo1 >= 1.07} -%else -%{!?without_lzo:BuildRequires: lzo-devel >= 1.07} -%{!?without_lzo:Requires: lzo >= 1.07} -%endif -%endif - -%{!?without_pam:BuildRequires: pam-devel} -%{!?without_pam:Requires: pam} - -%{?with_pkcs11:BuildRequires: pkcs11-helper-devel} -%{?with_pkcs11:Requires: pkcs11-helper} - -# -# Description -# - -%description -OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -OpenVPN supports SSL/TLS security, -ethernet bridging, -TCP or UDP tunnel transport through proxies or NAT, -support for dynamic IP addresses and DHCP, -scalability to hundreds or thousands of users, -and portability to most major OS platforms. - -%package devel -Summary: OpenVPN is a robust and highly flexible VPN daemon by James Yonan. -Group: Applications/Internet -Requires: %{name} -%description devel -Development support for OpenVPN. - -# -# Define vendor type -# - -%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc" -%define VENDOR SuSE -%else -%define VENDOR %_vendor -%endif - -# -# Other definitions -# - -%define debug_package %{nil} - -# -# Build OpenVPN binary -# - -%prep -%setup -q - -%build -%configure \ - --disable-dependency-tracking \ - --docdir="%{_docdir}/%{name}-%{version}" \ - %{?with_password_save:--enable-password-save} \ - %{!?without_lzo:--enable-lzo} \ - %{?with_pkcs11:--enable-pkcs11} \ - %{?without_pam:--disable-plugin-auth-pam} -%__make - -# -# Installation section -# - -%install -[ %{buildroot} != "/" ] && rm -rf %{buildroot} -%__make install DESTDIR="%{buildroot}" - -# Install init script -%if "%{VENDOR}" == "SuSE" -%__install -c -d -m 755 "%{buildroot}/etc/init.d" -%__install -c -m 755 "distro/rpm/%{name}.init.d.suse" "%{buildroot}/etc/init.d/%{name}" -%else -%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d" -%__install -c -m 755 distro/rpm/%{name}.init.d.rhel "%{buildroot}/etc/rc.d/init.d/%{name}" -%endif - -# Install /etc/openvpn -%__install -c -d -m 755 "%{buildroot}/etc/%{name}" - -# Install extra %doc stuff -cp -r AUTHORS ChangeLog NEWS contrib/ sample/ \ - "%{buildroot}/%{_docdir}/%{name}-%{version}" - -# -# Clean section -# - -%clean -[ %{buildroot} != "/" ] && rm -rf "%{buildroot}" - -# -# On Linux 2.4, make the device node -# - -%post -case "`uname -r`" in -2.4*) - /bin/mkdir /dev/net >/dev/null 2>&1 - /bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1 - ;; -esac - -# -# Handle the init script -# - -/sbin/chkconfig --add %{name} -%if "%{VENDOR}" == "SuSE" -/etc/init.d/openvpn restart -%else -/sbin/service %{name} condrestart -%endif -%preun -if [ "$1" = 0 ] -then - %if "%{VENDOR}" == "SuSE" - /etc/init.d/openvpn stop - %else - /sbin/service %{name} stop - %endif - /sbin/chkconfig --del %{name} -fi - -# -# Files section -# -# don't use %doc as old rpmbuild removes it[1]. -# [1] http://rpm.org/ticket/836 - -%files -%defattr(-,root,root) -%{_mandir} -%{_sbindir}/%{name} -%{_libdir}/%{name} -%{_docdir}/%{name}-%{version} -%dir /etc/%{name} -%if "%{VENDOR}" == "SuSE" -/etc/init.d/%{name} -%else -/etc/rc.d/init.d/%{name} -%endif - -%files devel -%defattr(-,root,root) -%{_includedir}/* - -%changelog -* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net> -- Removed management/ directory from %doc - -* Thu Dec 14 2006 Alon Bar-Lev -- Added with_pkcs11 - -* Mon Aug 2 2005 James Yonan -- Fixed build problem with --define 'without_pam 1' - -* Mon Apr 4 2005 James Yonan -- Moved some files from /usr/share/openvpn to %doc for compatibility - with Dag Wieers' RPM repository - -* Sat Mar 12 2005 Tom Walsh -- Added MandrakeSoft liblzo1 require - -* Fri Dec 10 2004 James Yonan -- Added AutoReq: 0 for manual dependencies - -* Fri Dec 10 2004 James Yonan -- Packaged the plugins - -* Sun Nov 7 2004 Umberto Nicoletti -- SuSE support - -* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca> -- restrict what we claim in /etc/ to avoid ownership conflicts - -* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1. -- Have the version number filled in by autoconf. - -* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1 -- Fixed %preun to only remove service on final uninstall - -* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1 -- Added condrestart to openvpn.spec & openvpn.init. - -* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1 -- Added mknod for Linux 2.4. - -* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2 -- Added init scripts -- Added conf file support - -* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1 -- Added new directories for config examples and such - -* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1 -- Updated buildroot directive and cleanup command -- added easy-rsa utilities - -* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1 -- Initial build. |