summaryrefslogtreecommitdiff
path: root/backend/st400.conf.in
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
commit6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch)
tree2e301d871bbeeb44aa57ff9cc070fcf3be484487 /backend/st400.conf.in
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'backend/st400.conf.in')
-rw-r--r--backend/st400.conf.in53
1 files changed, 53 insertions, 0 deletions
diff --git a/backend/st400.conf.in b/backend/st400.conf.in
new file mode 100644
index 0000000..5e29226
--- /dev/null
+++ b/backend/st400.conf.in
@@ -0,0 +1,53 @@
+# the ST400 is fixed to ID 3
+scsi SIEMENS "ST 400" Scanner * * 3 *
+scsi SIEMENS "ST 800" Scanner * * 3 *
+
+# The following options are for testing and bug-hunting. If your scanner
+# needs one of these options to function reliably, please let me know.
+
+# Maximum amount of data to read in a single SCSI command. If not set
+# (or set to 0), the backend will read as much data as allowed by the
+# scanner model or the OS. WARNING: Using this option overrides the
+# hardcoded # maxread limits for all scanner models! With more than
+# 65536 bytes, my ST400 locks up (itself, the SCSI bus, the sg driver,
+# and the machine). Use with caution.
+#option maxread 65536
+
+# Use this to switch the scanner lights on with a separate MODE SELECT call
+# and wait for some time before starting to scan (to allow the lights to go
+# to full intensity). The time is in 1/10 seconds (i.e. 20 means 2 seconds).
+# If not set, scanning starts immediately (works with my ST400).
+#option delay 20
+
+# The following are hacks that affect all scanners of the same model as the
+# last attached device. Used like this (assume ST800's had 8bit depth and
+# 4MB internal buffer):
+# scsi SIEMENS "ST 400" Scanner * * 3 *
+# option scanner_bufsize 2097152
+# option scanner_bits 6
+# scsi SIEMENS "ST 800" Scanner * * 3 *
+# option scanner_bufsize 4194304
+# option scanner_bits 8
+# Currently, the backend has entries for ST400, ST800 and "everything else".
+# To add more scanners, you have to add a line in the st400_models array.
+# Please note that these options are only for testing unknown devices with
+# this backend.
+
+# Internal scanner buffer:
+#option scanner_bufsize 2097152
+
+# Bit depth:
+#option scanner_bits 6
+
+# Maximum bytes to read in a single SCSI command (see also maxread above).
+#option scanner_maxread 65536
+
+# Supported resolutions (upto 15 different values). If you specify an
+# illegal value here, most likely the scanner will not report an error,
+# but only scan a small sub-area of the requested area (at least my ST400
+# does this).
+#option scanner_resolutions 200 300 400
+
+# This option causes the SCSI inquiry response to be written to
+# "$HOME/st400.dump" (as binary data). For debugging purposes.
+#option dump_inquiry