summaryrefslogtreecommitdiff
path: root/doc/sane-umax.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 17:00:20 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2019-07-31 17:00:20 +0200
commit3759ce55ba79b8d3b9d8ed247a252273ee7dade3 (patch)
treed69692a274dd1c7d0672e6bb7155a0fc106f9d49 /doc/sane-umax.man
parentc8bd2513ecba169cff44c09c8058c36987357b18 (diff)
parent1687222e1b9e74c89cafbb5910e72d8ec7bfd40f (diff)
Update upstream source from tag 'upstream/1.0.28'
Update to upstream version '1.0.28' with Debian dir ec5bb298266630fc3801ff6dc0c258f6df7ba979
Diffstat (limited to 'doc/sane-umax.man')
-rw-r--r--doc/sane-umax.man24
1 files changed, 12 insertions, 12 deletions
diff --git a/doc/sane-umax.man b/doc/sane-umax.man
index 7dd9382..41b4beb 100644
--- a/doc/sane-umax.man
+++ b/doc/sane-umax.man
@@ -20,12 +20,12 @@ parallel- and USB-scanners are not (and probably will never be) supported!
.SH CONFIGURATION
-The configuration file for this backend resides in
+The configuration file for this backend resides in
.IR @CONFIGDIR@/umax.conf .
Its contents is a list of device names that correspond to UMAX and UMAX compatible scanners. Empty lines
and lines starting with a hash mark (#) are ignored. A sample configuration file is
-shown below:
+shown below:
.nf
# this is a comment
@@ -44,19 +44,19 @@ shown below:
option calibration\-width\-offset \-1
option calibration\-bytes\-pixel \-1
option exposure\-time\-rgb\-bind \-1
- option invert\-shading\-data \-1
+ option invert\-shading\-data \-1
option lamp\-control\-available 0
option gamma\-lsb\-padded 0
- /dev/sge
-\
- #scsi Vendor Model Type Bus Channel ID LUN
+ /dev/sge
+\
+ #scsi Vendor Model Type Bus Channel ID LUN
# The following scanner supports lamp control
option lamp\-control\-available 1
- scsi UMAX * Scanner * * * * *
-\
+ scsi UMAX * Scanner * * * * *
+\
# scanner on /dev/scanner does not support lamp control
option lamp\-control\-available 0
- /dev/scanner
+ /dev/scanner
.fi
.TP
@@ -194,7 +194,7 @@ command queueing you can try to set this value to 1.
.PP
The special device name must be a generic SCSI device or a symlink to such a device.
To find out to which device your scanner is assigned and how you have to set the
-permissions of that device, have a look at sane\-scsi.
+permissions of that device, have a look at sane\-scsi.
.SH SCSI ADAPTER TIPS
@@ -203,7 +203,7 @@ well by Linux (I suggest not to use it), the PCI-SCSI-adapters that come with so
Umax-scanners are not supported at all (as far as I know). On other platforms these
SCSI-adapters are not supported. So you typically need to purchase another SCSI-adapter
that is supported by your platform. See the relevant hardware FAQs and HOWTOs for your
-platform for more information.
+platform for more information.
The UMAX-scanners do block the scsi-bus for a few seconds while scanning. It is not
necessary to connect the scanner to its own SCSI-adapter. But if you need short
@@ -240,7 +240,7 @@ SANE_DEBUG_UMAX values
.ft CR
.nf
Number Remark
-\
+\
0 print important errors (printed each time)
1 print errors
2 print sense