summaryrefslogtreecommitdiff
path: root/doc/sane-umax_pp.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
commit6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch)
tree2e301d871bbeeb44aa57ff9cc070fcf3be484487 /doc/sane-umax_pp.man
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'doc/sane-umax_pp.man')
-rw-r--r--doc/sane-umax_pp.man302
1 files changed, 302 insertions, 0 deletions
diff --git a/doc/sane-umax_pp.man b/doc/sane-umax_pp.man
new file mode 100644
index 0000000..2a8349d
--- /dev/null
+++ b/doc/sane-umax_pp.man
@@ -0,0 +1,302 @@
+.TH "sane\-umax_pp" "5" "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
+.IX sane\-umax_pp
+.SH "NAME"
+sane\-umax_pp \- SANE backend for Umax Astra parallel port flatbed scanners
+.SH "DESCRIPTION"
+The
+.B sane\-umax_pp
+library implements a SANE (Scanner Access Now Easy) backend that
+provides access to Umax parallel port flatbed scanners. The
+following scanners work with this backend:
+.PP
+.RS
+Model:
+.br
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+.br
+Astra 610P
+.br
+Astra 1220P
+.br
+HP3200C
+.br
+Astra 1600P
+.br
+Astra 2000P
+.br
+Genius ColorPage-Life Pro
+.br
+.RE
+.PP
+This backend handles 75x75, 150x150, 300x300, 600x600 and 600x1200 for 1220P/1600P/2000P
+dpi scan resolutions, and 75x75, 150x150, 300x300 and 300x600 for 610P. In color and gray
+levels, there is a software lineart mode.
+.PP
+The new generation models share a newer version of the 610P ASIC embedded in an EPAT chip.
+Only parts such as CCD and ADC change from
+one to another. They even all reports being UMAX Astra 1220P via IEEE1284.
+There isn't software way to recognize them properly. Under windows, model is
+set by the driver installed, regardless of the hardware.
+.PP
+.TP
+.B EPP/ECP MODES ONLY
+The current version of the backend uses only EPP or ECP mode to communicate
+with the scanner. PS/2 mode isn't implemented. The 610P only use SPP. It is
+recommended that you set your parallel port to EPP in BIOS with the current
+version of this
+backend. You can leave it to ECP or ECP+EPP, but in this case you may not use
+ppdev but only direct hardware access if you have to use ECP. ECPEPP will only
+work if you use a 2.4 or 2.6 kernel with ppdev character device support.
+.PP
+This backend does support parport sharing only
+.I
+if you have a kernel with ppdev support.
+.I
+.PP
+Note that if you don't use the ppdev character device, the backend
+needs to run as root. To allow user access to the scanner
+run the backend through the network interface (See saned(8) and sane\-net(5)).
+A more relaxed solution (security wise) is to add suid bit to the frontend
+(See chmod(1)).
+The backend drop root priviledges as soon as it can, right after gaining direct
+access to IO ports, which lessen risks when being root.
+
+.SH "DEVICE NAMES"
+This backend expects device names of the form:
+.PP
+.RS
+.I port value
+.RE
+.PP
+Where
+\fBvalue\fR is :
+
+.RS
+.TP
+auto
+autodetect all parallel ports and probe
+them for scanner
+.TP
+safe\-auto
+autodetect all parallel ports and probe
+them for scanner, but does not try direct
+hardware access
+.TP
+/dev/ppi0
+uses *BSD ppi device, depending on the
+number of available parallel port, you
+have to use /dev/ppi1, /dev/ppi2, ...
+.TP
+/dev/parport0
+uses linux ppdev device, depending on the
+number of available parallel port, you
+have to use /dev/parport1, /dev/parport2, ...
+.TP
+0x378
+does direct hardware access on the given
+address. Usual values are 0x378, 0x278, 0x3BC
+In this case, you have to run the scanner as
+root (*BSD and linux), or with 'IOPL=yes' on
+OS/2
+.PP
+.RE
+\fBNOTE:\fR in all cases, you must have sufficient priviledges
+to get access to the chosen device or address. Depending on the
+security settings, devices may not be available for all users.
+You have to change permissions on the dev/ppi* or /dev/parport* devices.
+.PP
+.RE
+You can rename any device using the
+.PP
+.RS
+.I name devname
+.br
+.I model model
+.br
+.I vendor vendor
+.RE
+.PP
+options. These options apply to the last port option.
+
+.SH "CONFIGURATION"
+Please make sure to edit umax_pp.conf
+.B before
+you use the backend.
+.PP
+The contents of the
+.B umax_pp.conf
+file is a list of options and device names that correspond to Umax
+scanners. Empty lines and lines starting with a hash mark (#) are
+ignored.
+.PP
+The eight options supported are
+.BR red\-gain ,
+.BR green\-gain ,
+.BR blue\-gain ,
+.BR red\-offset ,
+.BR green\-offset ,
+.BR blue\-offset ,
+.BR astra ,
+and
+.BR buffer .
+
+Options
+.B red\-gain
+,
+.B green\-gain
+and
+.B blue\-gain
+allow you to adjust the sensitivity of your scanner for the given color. Values
+range from 0 (lowest gain) to 15 (highest). If the advanced option "Gain" isn't
+checked in the frontend, the backend does automatic gain calibration, and do not use
+user provided values.
+
+.PP
+
+Options
+.B red\-offset
+,
+.B green\-offset
+and
+.B blue\-offset
+allow you to adjust the offset of your scanner for the given color. Values
+range from 0 (lowest offset) to 15 (highest).
+.PP
+
+Option
+.B astra
+allows you to change the model of your scanner. Current auto detection is based
+on side effects on scanning when using 1220P command set on other models, so
+it may fail on unknown hardware combination. Valid values are 610, 1220, 1600
+and 2000. It is useful only when autodetection fails to detect properly
+your scanner model. If your scanner work properly but is reported wrongly,
+let it be that way.
+The only valid case to change the model is when your scanner produces "black" or
+"inverted" scans. In this case you can put the model. Be aware that it will
+prevent scanner model autodetection.
+.PP
+
+Option
+.B buffer
+allows you to change the size of the scan buffer. The size must be specified in
+bytes. The default value is 2 megabytes. Decreasing this value will improve the
+smoothness of progress bar in the frontend, but will stall the
+scan more often.
+
+.PP
+
+
+
+.SH "FILES"
+.TP
+.I @CONFIGDIR@/umax_pp.conf
+The backend configuration file (see also description of
+.B SANE_CONFIG_DIR
+below).
+.TP
+.I @LIBDIR@/libsane\-umax_pp.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-umax_pp.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+
+.SH "ENVIRONMENT"
+.TP
+.B SANE_CONFIG_DIR
+This environment variable specifies the list of directories that may
+contain the configuration file. Under UNIX, the directories are
+separated by a colon (`:'), under OS/2, they are separated by a
+semi-colon (`;'). If this variable is not set, the configuration file
+is searched in two default directories: first, the current working
+directory (".") and then in @CONFIGDIR@. If the value of the
+environment variable ends with the directory separator character, then
+the default directories are searched after the explicitly specified
+directories. For example, setting
+.B SANE_CONFIG_DIR
+to "/tmp/config:" would result in directories "tmp/config", ".", and
+"@CONFIGDIR@" being searched (in this order).
+.TP
+.B SANE_DEBUG_UMAX_PP
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend. E.g.,
+a value of 128 requests all debug output to be printed. Smaller
+levels reduce verbosity.
+
+.PP
+.RS
+.ft CR
+.nf
+level debug output
+\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+ 0 nothing
+ 1 errors
+ 2 warnings & minor errors
+ 3 additional information
+ 4 debug information
+ 5 code flow (not supported yet)
+ 6 special debug information
+.fi
+.ft R
+.RE
+.PP
+.TP
+.B SANE_DEBUG_UMAX_PP_LOW
+This variable sets the debug level for the SANE interface for the Umax
+ASIC. Note that enabling this will spam your terminal with some
+million lines of debug output.
+
+.PP
+.RS
+.ft CR
+.nf
+level debug output
+\-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+ 0 nothing
+ 1 errors
+ 8 command blocks
+ 16 detailed code flow
+ 32 dump datafiles
+ 255 everything
+.fi
+.ft R
+.RE
+.PP
+
+.PP
+.SH "SEE ALSO"
+sane(7), sane\-net(5), saned(8)
+
+.TP
+For latest bug fixes and information see
+.I http://umax1220p.sourceforge.net/
+
+.SH "AUTHOR"
+St\['e]phane Voltz <stef.dev@free.fr>
+
+.SH "CREDITS"
+Support for the 610P has been made possible thank to an hardware donation
+by William Stuart.
+
+.SH "BUG REPORTS"
+If something doesn't work, please contact me. But I need some information about
+your scanner to be able to help you...
+
+.TP
+.I SANE version
+run "scanimage \-V" to determine this
+.TP
+.I the backend version and your scanner hardware
+run "SANE_DEBUG_UMAX_PP=255 scanimage \-L 2>log" as root. If you don't get any output
+from the umax_pp backend, make sure a line "umax_pp" is included into
+your @CONFIGDIR@/dll.conf.
+If your scanner isn't detected, make sure you've defined the right port address, or the
+correct device
+in your umax_pp.conf.
+.TP
+.I the name of your scanner/vendor
+also a worthy information. Please also include the optical resolution and lamp type of your scanner, both can be found in the manual of your scanner.
+.TP
+.I any further comments
+if you have comments about the documentation (what could be done better), or you
+think I should know something, please include it.