1 files changed, 0 insertions, 380 deletions
diff --git a/backend/genesys/tables_motor_profile.cpp b/backend/genesys/tables_motor_profile.cpp
deleted file mode 100644
index 18f7271..0000000
--- a/backend/genesys/tables_motor_profile.cpp
+++ /dev/null
@@ -1,380 +0,0 @@
-/*  sane - Scanner Access Now Easy.
-
-    Copyright (C) 2019 Povilas Kanapickas <povilas@radix.lt>
-
-    This file is part of the SANE package.
-
-    This program is free software; you can redistribute it and/or
-    modify it under the terms of the GNU General Public License as
-    published by the Free Software Foundation; either version 2 of the
-    License, or (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful, but
-    WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place - Suite 330, Boston,
-    MA 02111-1307, USA.
-
-    As a special exception, the authors of SANE give permission for
-    additional uses of the libraries contained in this release of SANE.
-
-    The exception is that, if you link a SANE library with other files
-    to produce an executable, this does not by itself cause the
-    resulting executable to be covered by the GNU General Public
-    License.  Your use of that executable is in no way restricted on
-    account of linking the SANE library code into it.
-
-    This exception does not, however, invalidate any other reasons why
-    the executable file might be covered by the GNU General Public
-    License.
-
-    If you submit changes to SANE to the maintainers to be included in
-    a subsequent release, you agree by submitting the changes that
-    those changes may be distributed with this exception intact.
-
-    If you write modifications of your own for SANE, it is your choice
-    whether to permit this exception to apply to your modifications.
-    If you do not wish that, delete this exception notice.
-*/
-
-#define DEBUG_DECLARE_ONLY
-
-#include "low.h"
-
-namespace genesys {
-
-StaticInit<std::vector<Motor_Profile>> gl843_motor_profiles;
-
-void genesys_init_motor_profile_tables_gl843()
-{
-    gl843_motor_profiles.init();
-
-    auto profile = Motor_Profile();
-    profile.motor_id = MotorId::KVSS080;
-    profile.exposure = 8000;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(44444, 500, 489);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::G4050;
-    profile.exposure = 8016;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(7842, 320, 602);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::G4050;
-    profile.exposure = 15624;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(9422, 254, 1004);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::G4050;
-    profile.exposure = 42752;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(42752, 1706, 610);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::G4050;
-    profile.exposure = 56064;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(28032, 2238, 604);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_4400F;
-    profile.exposure = 11640;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(49152, 484, 1014);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_8400F;
-    profile.exposure = 50000;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(8743, 300, 794);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_8600F;
-    profile.exposure = 0x59d8;
-    profile.step_type = StepType::QUARTER;
-    // FIXME: if the exposure is lower then we'll select another motor
-    profile.slope = MotorSlope::create_from_steps(54612, 1500, 219);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7200I;
-    profile.exposure = 0;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(39682, 1191, 15);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7300;
-    profile.exposure = 0x2f44;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(31250, 1512, 6);
-    gl843_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::PLUSTEK_OPTICFILM_7500I;
-    profile.exposure = 0;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(31250, 1375, 7);
-    gl843_motor_profiles->push_back(profile);
-}
-
-StaticInit<std::vector<Motor_Profile>> gl846_motor_profiles;
-
-void genesys_init_motor_profile_tables_gl846()
-{
-    gl846_motor_profiles.init();
-
-    auto profile = Motor_Profile();
-    profile.motor_id = MotorId::IMG101;
-    profile.exposure = 11000;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017);
-
-    gl846_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::PLUSTEK_OPTICBOOK_3800;
-    profile.exposure = 11000;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(22000, 1000, 1017);
-    gl846_motor_profiles->push_back(profile);
-}
-
-/**
- * database of motor profiles
- */
-
-StaticInit<std::vector<Motor_Profile>> gl847_motor_profiles;
-
-void genesys_init_motor_profile_tables_gl847()
-{
-    gl847_motor_profiles.init();
-
-    auto profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_100;
-    profile.exposure = 2848;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_100;
-    profile.exposure = 1424;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_100;
-    profile.exposure = 1432;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_100;
-    profile.exposure = 2712;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 279);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_100;
-    profile.exposure = 5280;
-    profile.step_type = StepType::EIGHTH;
-    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 2848;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 1424;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 1432;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 2712;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 279);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 5280;
-    profile.step_type = StepType::EIGHTH;
-    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_200;
-    profile.exposure = 10416;
-    profile.step_type = StepType::EIGHTH;
-    profile.slope = MotorSlope::create_from_steps(31680, 534, 247);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_700;
-    profile.exposure = 2848;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_700;
-    profile.exposure = 1424;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_700;
-    profile.exposure = 1504;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 534, 255);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_700;
-    profile.exposure = 2696;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(46876, 2022, 127);
-    gl847_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_700;
-    profile.exposure = 10576;
-    profile.step_type = StepType::EIGHTH;
-    profile.slope = MotorSlope::create_from_steps(46876, 15864, 2);
-    gl847_motor_profiles->push_back(profile);
-}
-
-StaticInit<std::vector<Motor_Profile>> gl124_motor_profiles;
-
-void genesys_init_motor_profile_tables_gl124()
-{
-    gl124_motor_profiles.init();
-
-    // NEXT LPERIOD=PREVIOUS*2-192
-    Motor_Profile profile;
-    profile.motor_id = MotorId::CANON_LIDE_110;
-    profile.exposure = 2768;
-    profile.step_type = StepType::FULL;
-    profile.slope = MotorSlope::create_from_steps(62496, 335, 255);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_110;
-    profile.exposure = 5360;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(62496, 335, 469);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_110;
-    profile.exposure = 10528;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(62496, 2632, 3);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_110;
-    profile.exposure = 20864;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(62496, 10432, 3);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_120;
-    profile.exposure = 4608;
-    profile.step_type = StepType::FULL;
-    profile.slope = MotorSlope::create_from_steps(62496, 864, 127);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_120;
-    profile.exposure = 5360;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(62496, 2010, 63);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_120;
-    profile.exposure = 10528;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(62464, 2632, 3);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_120;
-    profile.exposure = 20864;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(62592, 10432, 5);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_210;
-    profile.exposure = 2768;
-    profile.step_type = StepType::FULL;
-    profile.slope = MotorSlope::create_from_steps(62496, 335, 255);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_210;
-    profile.exposure = 5360;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(62496, 335, 469);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_210;
-    profile.exposure = 10528;
-    profile.step_type = StepType::HALF;
-    profile.slope = MotorSlope::create_from_steps(62496, 2632, 3);
-    gl124_motor_profiles->push_back(profile);
-
-    profile = Motor_Profile();
-    profile.motor_id = MotorId::CANON_LIDE_210;
-    profile.exposure = 20864;
-    profile.step_type = StepType::QUARTER;
-    profile.slope = MotorSlope::create_from_steps(62496, 10432, 4);
-    gl124_motor_profiles->push_back(profile);
-}
-
-void genesys_init_motor_profile_tables()
-{
-    genesys_init_motor_profile_tables_gl843();
-    genesys_init_motor_profile_tables_gl846();
-    genesys_init_motor_profile_tables_gl847();
-    genesys_init_motor_profile_tables_gl124();
-}
-
-} // namespace genesys