summaryrefslogtreecommitdiff
path: root/doc/gt68xx
diff options
context:
space:
mode:
Diffstat (limited to 'doc/gt68xx')
-rw-r--r--doc/gt68xx/gt68xx.CHANGES18
-rw-r--r--doc/gt68xx/gt68xx.TODO6
2 files changed, 12 insertions, 12 deletions
diff --git a/doc/gt68xx/gt68xx.CHANGES b/doc/gt68xx/gt68xx.CHANGES
index aa87504..074c1c9 100644
--- a/doc/gt68xx/gt68xx.CHANGES
+++ b/doc/gt68xx/gt68xx.CHANGES
@@ -80,7 +80,7 @@ V 1.0.73 (2005-08-19)
V 1.0.72 (2005-08-18)
* Finally fixed the problem concerning scanning on *BSD. Scanning only worked
- once. After that, the scanner wasn't even detected anymore beacuse the config
+ once. After that, the scanner wasn't even detected anymore because the config
descriptor returned by the device was corrupted. This is a hardware bug. When
filling the internal memory of the scanner completely, the config descriptor
is overwritten. The work-around is to ask the scanner for the device
@@ -205,7 +205,7 @@ V 1.0-61 (2004-06-18)
* Check for status of read_scanned_data every 10 ms. Avoids short stops before
scan data comes in.
* Added resolution limit for using backtracking.
- * Reduced deafult CCD backtracking to 0x10 lines.
+ * Reduced default CCD backtracking to 0x10 lines.
* CCD coarse calibration:
* Check if calib has succeeded per color now (fewer loops).
* Added loop detection now.
@@ -399,7 +399,7 @@ V 1.0-40 (2003-02-22)
- Added indormation about Medion 4394.
- Mention ma1509 backend.
- Fix segfault when calling sane_open with an empty device name.
-- Explicitely initialize global variables to avoid segfaults when calling
+- Explicitly initialize global variables to avoid segfaults when calling
sane_init/sane_exit more than once.
V 1.0-39 (2003-02-16)
@@ -416,7 +416,7 @@ V 1.0-38 (2003-02-05)
- Increase the lowest black for CCD coarse calibration to avoid too much black.
- Adjusted internal gamma correction to avoid getting 0 for high gamma values.
- CCD scanners use color mode for coarse+quality cal now. This fixes the
- problem with extremly high gains and terrible quality cal in gray mode at
+ problem with extremely high gains and terrible quality cal in gray mode at
least for the BearPaw 1200 TA.
--> Thanks to Alexei V. Mezin for reporting these bugs.
- Preview isn't always in 8 bit mode now (can be selected by option).
@@ -533,8 +533,8 @@ V 1.0-26 (2002-10-22)
- Several fixes for Medion MD-9385 and Artec Ultima 2000 based scanners. The
Cytron MD 9385 works now.
-- Diabled Plustek-like firmware check again, didn't work for MD 9385.
-- Splitted flags for mirror_x and sset_home.
+- Disabled Plustek-like firmware check again, didn't work for MD 9385.
+- Split flags for mirror_x and sset_home.
V 1.0-25 (2002-10-20)
@@ -575,7 +575,7 @@ V 1.0-22 (2002-10-07),
- Line calibration uses the bit depth of the main scan now.
- Vendor, product ids and other information is printed when debugging is active
- Fixed segfault in attach ().
-- Fixed endianess issues (untested).
+- Fixed endianness issues (untested).
- Code cleanup.
V 1.0-21 (2002-10-07),
@@ -612,7 +612,7 @@ V 1.0-18 (2002-10-01)
- Added detection of Artec Ultima 2000.
- Updated Lexmark X70 settings.
-- Fixed segfault that occured when no device was detected.
+- Fixed segfault that occurred when no device was detected.
- Changed test for loaded firmware for GT-6801 scanners.
V 1.0-17 (2002-10-01)
@@ -699,7 +699,7 @@ V 1.0-9 (2002-09-17)
- Added option to disable automatic gain (->less ugly colors for GT-6801
based models)
-- Fixed segfault that occured when a scan was cancelled
+- Fixed segfault that occurred when a scan was cancelled
- Preview uses slow but safe (?) 300 dpi 8 bit modes now
- Fixed bug concerning X0/Y0 coordinates
- Started implementing dpeth option (doesn't work yet)
diff --git a/doc/gt68xx/gt68xx.TODO b/doc/gt68xx/gt68xx.TODO
index 74aeb17..4909b08 100644
--- a/doc/gt68xx/gt68xx.TODO
+++ b/doc/gt68xx/gt68xx.TODO
@@ -33,7 +33,7 @@ Mustek BearPaw 2448 TA Plus:
- Sometimes there is a USB protocol error when cancelling the scan?
- top borders move with resolution (happened in the early days with 2400 TA!)
- gray scans have different brightness
-- scan motor is bumpy and freezes sometimes, looks like accelaration is too big
+- scan motor is bumpy and freezes sometimes, looks like acceleration is too big
(firmware problem?)
- vertical stripes
- TA settings are wrong
@@ -93,7 +93,7 @@ Mustek ScanExpress 1248 UB
ok
Plustek OpticSlim 2400
-- only upto 1200 dpi vertical works
+- only up to 1200 dpi vertical works
- only 8 and 12 bit work, 16 doesn't (check Windows)
- exposure is extremely high and seems to have similar problems as with other
CIS scanners (reaches limit also)
@@ -102,4 +102,4 @@ Mustek ScanExpress 2400 USB
- make it work (nobody seems to have this device)
Visioneer OneTouch 7300
-- 16 bit doesn't seem to work despite beeing advertized
+- 16 bit doesn't seem to work despite being advertized