diff options
Diffstat (limited to 'doc/sane-epjitsu.man')
| -rw-r--r-- | doc/sane-epjitsu.man | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/doc/sane-epjitsu.man b/doc/sane-epjitsu.man index 5d2a8ca..3552691 100644 --- a/doc/sane-epjitsu.man +++ b/doc/sane-epjitsu.man @@ -1,4 +1,4 @@ -.TH sane\-epjitsu 5 "12 Jun 2014" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" +.TH sane\-epjitsu 5 "11 Apr 2017" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy" .IX sane\-epjitsu .SH NAME @@ -7,7 +7,7 @@ sane\-epjitsu \- SANE backend for Epson-based Fujitsu USB scanners. .SH DESCRIPTION The .B sane\-epjitsu -library implements a SANE (Scanner Access Now Easy) backend which provides basic access the Fujitsu fi\-60F/fi\-65F and ScanSnap S300/S1300/S1100 scanners. +library implements a SANE (Scanner Access Now Easy) backend which provides basic access the Fujitsu fi\-60F/fi\-65F and ScanSnap S300/S1300(i)/S1100(i) scanners. .SH HARDWARE SUPPORT These scanners are fairly limited, only supporting a couple of modes and resolutions, and always scanning full width. The backend supports missing modes (binary, grayscale) and intermediate resolutions in software, but provides only minimal scan area controls. See @@ -87,7 +87,7 @@ The backend uses a single environment variable, SANE_DEBUG_EPJITSU, which enable Only limited scan area options are exposed. .br .br -fi\-60F and fi\-65F hardware grayscale mode is not used. +fi\-60F and fi\-65F hardware grayscale mode is not used, because the calibration code is not finished. .RE .SH CREDITS |