Imported Upstream version 0.9.10upstream/0.9.10

14 files changed, 1215 insertions, 0 deletions

diff --git a/help/C/adf.page b/help/C/adf.page
new file mode 100644
index 0000000..8d8a3dc
--- /dev/null
+++ b/help/C/adf.page
@@ -0,0 +1,18 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="adf">
+
+    <info>
+        <link type="guide" xref="index#acquire"/>
+    </info>
+
+	<title>Using an Automatic Document Feeder</title>
+
+    <p>
+    If your scanner has an Automatic Document Feeder (ADF) you can scan all the pages by selecting the <guiseq><gui>Document</gui><gui>Scan</gui><gui>All Pages From Feeder</gui></guiseq> menu.
+    </p>
+    <p>
+    By default both sides of the paper will be scanned if your scanned supports this.
+    Single side scanning can be configured from the <guiseq><gui>Document</gui><gui>Preferences</gui></guiseq> menu.
+    </p>
+</page>
diff --git a/help/C/crop.page b/help/C/crop.page
new file mode 100644
index 0000000..4102c9d
--- /dev/null
+++ b/help/C/crop.page
@@ -0,0 +1,24 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="crop">
+
+    <info>
+        <link type="guide" xref="index#modify"/>
+    </info>
+  
+	<title>Cropping</title>
+
+    <p>
+    To use only part of the scanned page enable crop by selecting the crop button in the toolbar.
+    A mask will be shown over the current page with the area not being used shown in gray.
+    </p>
+    <p>
+    The crop area can be adjusted by clicking on the inside of the crop area border and dragging the mouse.
+    </p>
+    <p>
+    Fixed crop sizes can be chosen from the <guiseq><gui>Page</gui><gui>Crop</gui></guiseq> menu that match commonly used paper sizes.
+    </p>
+    <p>
+    Each new page that is scanned will use the previous crop.
+    </p>
+</page>
diff --git a/help/C/dpi.page b/help/C/dpi.page
new file mode 100644
index 0000000..a274bca
--- /dev/null
+++ b/help/C/dpi.page
@@ -0,0 +1,15 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="dpi">
+
+    <info>
+        <link type="guide" xref="index#acquire"/>
+    </info>
+  
+	<title>Setting the Scan Resolution</title>
+
+    <p>
+    By default text documents will be scanned at 200 dots per inch (dpi) and photos at 400 dpi.
+    To change these settings open the preferences from the <guiseq><gui>Document</gui><gui>Preferences</gui></guiseq> menu.
+    </p>
+</page>
diff --git a/help/C/edit.page b/help/C/edit.page
new file mode 100644
index 0000000..32d501d
--- /dev/null
+++ b/help/C/edit.page
@@ -0,0 +1,15 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="edit">
+
+    <info>
+        <link type="guide" xref="index#modify"/>
+    </info>
+  
+	<title>Editing a Document</title>
+
+    <p>
+    <app>Simple Scan</app> does not provide any editing functions.
+    To edit a document <link xref="save">save the document</link> and open it in your favourite editing application.
+    </p>
+</page>
diff --git a/help/C/email.page b/help/C/email.page
new file mode 100644
index 0000000..42540c2
--- /dev/null
+++ b/help/C/email.page
@@ -0,0 +1,21 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="email">
+
+    <info>
+        <link type="guide" xref="index#use"/>
+    </info>
+  
+	<title>Sending via Email</title>
+
+    <p>
+    To email the current document use the <guiseq><gui>Document</gui><gui>Email</gui></guiseq> menu (<keyseq><key>Ctrl</key><key>E</key></keyseq>).
+    Your email program will be opened with a new message containing the scanned document as an attachment.
+    </p>
+    <p>
+    If the document type is set to text the email will have a PDF attachment otherwise the email will have a JPEG attachment for each page.    
+    </p>
+    <p>
+    See <link xref="save"/> for more information about file formats.
+    </p>
+</page>
diff --git a/help/C/index.page b/help/C/index.page
new file mode 100644
index 0000000..6f5bff1
--- /dev/null
+++ b/help/C/index.page
@@ -0,0 +1,26 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="index">
+
+	<info>
+		<credit type="author">
+			<name>Robert Ancell</name>
+			<email>robert.ancell@gmail.com</email>
+		</credit>
+		<include href="legal.xml" xmlns="http://www.w3.org/2001/XInclude" />
+	</info>
+
+	<title>Simple Scan Help</title>
+    
+    <section id="acquire" style="2column">
+        <title>Scanning Pages</title>
+    </section>
+
+    <section id="modify" style="2column">
+        <title>Modifying the Document</title>
+    </section>
+
+    <section id="use" style="2column">
+        <title>Using the Document</title>
+    </section>
+</page>
diff --git a/help/C/legal.xml b/help/C/legal.xml
new file mode 100644
index 0000000..86d6173
--- /dev/null
+++ b/help/C/legal.xml
@@ -0,0 +1,9 @@
+<license xmlns="http://projectmallard.org/1.0/"
+         href="http://creativecommons.org/licenses/by-sa/3.0/">
+<p>This work is licensed under a
+<link href="http://creativecommons.org/licenses/by-sa/3.0/">Creative Commons
+Attribution-Share Alike 3.0 Unported License</link>.</p>
+<p>As a special exception, the copyright holders give you permission to copy,
+modify, and distribute the example code contained in this document under the
+terms of your choosing, without restriction.</p>
+</license>
diff --git a/help/C/print.page b/help/C/print.page
new file mode 100644
index 0000000..8f182ca
--- /dev/null
+++ b/help/C/print.page
@@ -0,0 +1,14 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="print">
+
+    <info>
+        <link type="guide" xref="index#use"/>
+    </info>
+  
+	<title>Printing</title>
+
+    <p>
+    To print the current document use the <guiseq><gui>Document</gui><gui>Print</gui></guiseq> menu (<keyseq><key>Ctrl</key><key>P</key></keyseq>).
+    </p>
+</page>
diff --git a/help/C/rotate.page b/help/C/rotate.page
new file mode 100644
index 0000000..caa8532
--- /dev/null
+++ b/help/C/rotate.page
@@ -0,0 +1,15 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="rotate">
+
+    <info>
+        <link type="guide" xref="index#modify"/>
+    </info>
+  
+	<title>Rotating Pages</title>
+
+    <p>
+    To rotate a page use the rotation buttons in the toolbar or the <key>[</key> and <key>]</key> keys.
+    Each new page that is scanned will use the previous rotation.
+    </p>
+</page>
diff --git a/help/C/save.page b/help/C/save.page
new file mode 100644
index 0000000..8c1a7b1
--- /dev/null
+++ b/help/C/save.page
@@ -0,0 +1,32 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="save">
+
+    <info>
+        <link type="guide" xref="index#use"/>
+    </info>
+  
+	<title>Saving to a File</title>
+
+    <p>
+    To save the current document to a file use the <guiseq><gui>Document</gui><gui>Save</gui></guiseq> menu (<keyseq><key>Ctrl</key><key>S</key></keyseq>).
+    When you save, there is a choice of three file types.
+    </p>
+    <terms>
+      <item>
+        <title>Portable Document Format (PDF)</title>
+        <p>A PDF can contain multiple pages (like a book) and is easy to distribute to other people.  Most people do not have software to modify PDF documents so this format is best used for archiving.</p>
+        <p>Use this type if you have scanned multiple pages of text.</p>
+      </item>
+      <item>
+        <title>JPEG</title>
+        <p>JPEG file is the file format used by digital cameras and is very small and so easy to distribute.  Most people have software to modify JPEG photos and this format is suitable for uploading to social networking sites.  If you have scanned multiple pages then a JPEG file will be written for each page.</p>
+        <p>Use this type if you want to modify or upload the scanned images.</p>
+      </item>
+      <item>
+        <title>PNG</title>
+        <p>PNG files contain the raw data from the scanner. This makes them much larger than JPEG files and not suitable for distributing. If you have scanned multiple pages then a PNG file will be written for each page.</p>
+        <p>Use this type if you need high resolution files for editing</p>
+      </item>
+    </terms>
+</page>
diff --git a/help/C/scanner.page b/help/C/scanner.page
new file mode 100644
index 0000000..d7decd2
--- /dev/null
+++ b/help/C/scanner.page
@@ -0,0 +1,19 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="scanner">
+
+    <info>
+        <link type="guide" xref="index#acquire"/>
+    </info>
+  
+	<title>Selecting a Scanner</title>
+
+    <p>
+    If you have multiple scanners you can change which scanner is selected from the <guiseq><gui>Document</gui><gui>Preferences</gui></guiseq> menu.
+    </p>
+
+    <p>
+    Your local scanners are automatically detected each time you start <app>Simple Scan</app> and each time you plug in USB scanner.
+    If you have a network scanner you will need to restart <app>Simple Scan</app> for it to be detected.
+    </p>
+</page>
diff --git a/help/C/scanning.page b/help/C/scanning.page
new file mode 100644
index 0000000..5d0b470
--- /dev/null
+++ b/help/C/scanning.page
@@ -0,0 +1,50 @@
+<page xmlns="http://projectmallard.org/1.0/"
+      type="guide"
+      id="scanning">
+
+    <info>
+        <title type="sort">0</title>
+        <link type="guide" xref="index#acquire"/>
+    </info>
+  
+	<title>Scanning a Page</title>
+
+    <p>
+    To scan a document from your scanner:
+    </p>
+    <steps>
+    <item>
+      <p>
+        Connect the scanner to your computer.
+      </p>
+    </item>
+    <item>
+      <p>
+        Open <app>Simple Scan</app>.
+      </p>
+    </item>
+    <item>
+      <p>
+        Press the scan button in the toolbar (or <keyseq><key>Ctrl</key><key>1</key></keyseq>).
+      </p>
+    </item>
+    </steps>
+
+    <p>
+    The page will be shown as it is scanned.
+    </p>
+
+    <p>
+    Each page you scan is added to the end of your document.  To start a new document select <guiseq><gui>Document</gui><gui>New</gui></guiseq>.
+    Individual pages can be deleted by right clicking a page or pressing the <key>Delete</key> key.
+    </p>
+
+    <p>
+    The type of scan can be changed from the <guiseq><gui>Document</gui><gui>Scan</gui></guiseq> menu.
+    Choose <gui>Text</gui> if you want the document to be quickly scanned in black and white or <gui>Photo</gui> for a high resolution color scan.
+    </p>
+
+    <p>
+    To stop the scan at any time press <key>Escape</key>.
+    </p>
+</page>
diff --git a/help/Makefile.am b/help/Makefile.am
new file mode 100644
index 0000000..d12f00d
--- /dev/null
+++ b/help/Makefile.am
@@ -0,0 +1,23 @@
+include $(top_srcdir)/gnome-doc-utils.make
+
+dist-hook: doc-dist-hook
+
+DOC_ID = simple-scan
+DOC_INCLUDES = legal.xml
+DOC_FIGURES =
+DOC_PAGES = index.page \
+            adf.page \
+            crop.page \
+            dpi.page \
+            edit.page \
+            email.page \
+            print.page \
+            rotate.page \
+            save.page \
+            scanner.page \
+            scanning.page
+
+DOC_LINGUAS =
+
+DISTCLEANFILES = \
+	Makefile.in
diff --git a/help/Makefile.in b/help/Makefile.in
new file mode 100644
index 0000000..eee46d3
--- /dev/null
+++ b/help/Makefile.in
@@ -0,0 +1,934 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# gnome-doc-utils.make - make magic for building documentation
+# Copyright (C) 2004-2005 Shaun McCance <shaunm@gnome.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+################################################################################
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/gnome-doc-utils.make
+subdir = help
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DISABLE_DEPRECATED = @DISABLE_DEPRECATED@
+DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@
+DOC_USER_FORMATS = @DOC_USER_FORMATS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
+GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GREP = @GREP@
+HELP_DIR = @HELP_DIR@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+OMF_DIR = @OMF_DIR@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIMPLE_SCAN_CFLAGS = @SIMPLE_SCAN_CFLAGS@
+SIMPLE_SCAN_LIBS = @SIMPLE_SCAN_LIBS@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARN_CFLAGS = @WARN_CFLAGS@
+XGETTEXT = @XGETTEXT@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+_clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header)
+_DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS))
+_DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),		\
+	$(filter $(LINGUAS),$(DOC_LINGUAS)),					\
+	$(DOC_LINGUAS))
+
+_DOC_ABS_SRCDIR = @abs_srcdir@
+_xml2po_mode = $(if $(DOC_ID),mallard,docbook)
+@ENABLE_SK_TRUE@_ENABLE_SK = true
+
+################################################################################
+db2omf_args = \
+	--stringparam db2omf.basename $(DOC_MODULE)				\
+	--stringparam db2omf.format $(3)					\
+	--stringparam db2omf.dtd						\
+	$(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 		\
+		| sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/')			\
+	--stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2)))	\
+	--stringparam db2omf.omf_dir "$(OMF_DIR)"				\
+	--stringparam db2omf.help_dir "$(HELP_DIR)"				\
+	--stringparam db2omf.omf_in "$(_DOC_OMF_IN)"				\
+	$(if $(_ENABLE_SK),							\
+	  --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)")		\
+	$(_db2omf) $(2)
+
+_DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in))
+_DOC_OMF_DB = $(if $(_DOC_OMF_IN),						\
+	$(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf))
+
+_DOC_OMF_HTML = $(if $(_DOC_OMF_IN),						\
+	$(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf))
+
+
+# FIXME
+_DOC_OMF_ALL = \
+	$(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB))		\
+	$(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML))
+
+
+################################################################################
+_DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml)
+_DOC_C_PAGES = $(foreach page,$(DOC_PAGES),C/$(page))
+_DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent))
+_DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc))
+_DOC_C_DOCS = \
+	$(_DOC_C_ENTITIES)	$(_DOC_C_INCLUDES)			\
+	$(_DOC_C_PAGES)		$(_DOC_C_MODULE)
+
+_DOC_C_DOCS_NOENT = \
+	$(_DOC_C_MODULE)	$(_DOC_C_INCLUDES)			\
+	$(_DOC_C_PAGES)
+
+_DOC_C_FIGURES = $(if $(DOC_FIGURES),					\
+	$(foreach fig,$(DOC_FIGURES),C/$(fig)),				\
+	$(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png)))
+
+
+# FIXME: probably have to shell escape to determine the file names
+_DOC_C_HTML = $(foreach f,						\
+	$(shell xsltproc --xinclude 					\
+	  --stringparam db.chunk.basename "$(DOC_MODULE)"		\
+	  $(_chunks) "C/$(DOC_MODULE).xml"),				\
+	C/$(f).xhtml)
+
+
+###############################################################################
+_DOC_POFILES = $(if $(DOC_MODULE)$(DOC_ID),					\
+	$(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po))
+
+_DOC_MOFILES = $(patsubst %.po,%.mo,$(_DOC_POFILES))
+_DOC_LC_MODULES = $(if $(DOC_MODULE),						\
+	$(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml))
+
+_DOC_LC_PAGES = \
+	$(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach page,$(_DOC_C_PAGES),	\
+		$(lc)/$(notdir $(page)) ))
+
+_DOC_LC_INCLUDES = \
+	$(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES),	\
+		$(lc)/$(notdir $(inc)) ))
+
+
+# FIXME: probably have to shell escape to determine the file names
+_DOC_LC_HTML = \
+	$(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML),		\
+		$(lc)/$(notdir $(doc)) ))
+
+_DOC_LC_DOCS = \
+	$(_DOC_LC_MODULES)	$(_DOC_LC_INCLUDES)	$(_DOC_LC_PAGES)	\
+	$(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML))
+
+_DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS),				\
+	$(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) )
+
+_DOC_SRC_FIGURES = \
+	$(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS),	\
+		$(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) ))
+
+_DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot)
+
+################################################################################
+_DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \
+	$(_DOC_C_HTML) $(_DOC_LC_HTML))
+
+_DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml)
+_clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf)
+_clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk)
+_clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc)
+_clean_dir = $(if $(DOC_MODULE)$(DOC_ID),clean-doc-dir)
+_doc_install_dir = $(if $(DOC_ID),$(DOC_ID),$(DOC_MODULE))
+DOC_ID = simple-scan
+DOC_INCLUDES = legal.xml
+DOC_FIGURES = 
+DOC_PAGES = index.page \
+            adf.page \
+            crop.page \
+            dpi.page \
+            edit.page \
+            email.page \
+            print.page \
+            rotate.page \
+            save.page \
+            scanner.page \
+            scanning.page
+
+DOC_LINGUAS = 
+DISTCLEANFILES = \
+	Makefile.in
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gnome-doc-utils.make $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu help/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-local
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+	maintainer-clean-local
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-local
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-local \
+	dist-hook distclean distclean-generic distclean-local distdir \
+	dvi dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-local mostlyclean mostlyclean-generic \
+	mostlyclean-local pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-local
+
+
+DOC_H_FILE ?=
+
+DOC_H_DOCS ?=
+
+$(DOC_H_FILE): $(DOC_H_DOCS);
+	@rm -f $@.tmp; touch $@.tmp;
+	echo 'const gchar* documentation_credits[] = {' >> $@.tmp
+	list='$(DOC_H_DOCS)'; for doc in $$list; do \
+	  xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \
+	  if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \
+	  xsltproc --path "$$xmlpath" $(_credits) $$doc; \
+	done | sort | uniq \
+	  | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \
+	  | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> $@.tmp
+	echo '	NULL' >> $@.tmp
+	echo '};' >> $@.tmp
+	echo >> $@.tmp
+	list='$(DOC_H_DOCS)'; for doc in $$list; do \
+	  xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \
+	  if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \
+	  docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \
+	    | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \
+	  echo $$xmlpath; \
+	  ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \
+	  for id in $$ids; do \
+	    echo '#define HELP_'`echo $$docid`'_'`echo $$id \
+	      | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> $@.tmp; \
+	  done; \
+	  echo >> $@.tmp; \
+	done;
+	cp $@.tmp $@ && rm -f $@.tmp
+
+dist-check-gdu:
+@HAVE_GNOME_DOC_UTILS_FALSE@	@echo "*** GNOME Doc Utils must be installed in order to make dist"
+@HAVE_GNOME_DOC_UTILS_FALSE@	@false
+
+.PHONY: dist-doc-header
+dist-doc-header: $(DOC_H_FILE)
+	@if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \
+	echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \
+	$(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)";
+
+doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header)
+
+.PHONY: clean-doc-header
+clean-local: $(_clean_doc_header)
+distclean-local: $(_clean_doc_header)
+mostlyclean-local: $(_clean_doc_header)
+maintainer-clean-local: $(_clean_doc_header)
+clean-doc-header:
+	rm -f $(DOC_H_FILE)
+
+all: $(DOC_H_FILE)
+
+################################################################################
+
+DOC_MODULE ?=
+
+DOC_ID ?=
+
+DOC_PAGES ?=
+
+DOC_ENTITIES ?=
+
+DOC_INCLUDES ?=
+
+DOC_FIGURES ?=
+
+DOC_FORMATS ?= docbook
+
+DOC_LINGUAS ?=
+
+################################################################################
+
+_xml2po ?= `which xml2po`
+
+_db2html ?= `$(PKG_CONFIG) --variable db2html gnome-doc-utils`
+_db2omf  ?= `$(PKG_CONFIG) --variable db2omf gnome-doc-utils`
+_malrng  ?= `$(PKG_CONFIG) --variable malrng gnome-doc-utils`
+_chunks  ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/chunks.xsl
+_credits ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/credits.xsl
+_ids ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/ids.xsl
+@ENABLE_SK_TRUE@_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir`
+@ENABLE_SK_TRUE@_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir`
+@ENABLE_SK_TRUE@_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml
+
+$(_DOC_OMF_DB) : $(_DOC_OMF_IN)
+$(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml
+	@test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || {	\
+	  echo "The file '$(_skcontentslist)' does not exist." >&2;		\
+	  echo "Please check your ScrollKeeper installation." >&2;		\
+	  exit 1; }
+	xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; }
+
+$(_DOC_OMF_HTML) : $(_DOC_OMF_IN)
+$(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml
+@ENABLE_SK_TRUE@	@test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || {	\
+@ENABLE_SK_TRUE@	  echo "The file '$(_skcontentslist)' does not exist" >&2;		\
+@ENABLE_SK_TRUE@	  echo "Please check your ScrollKeeper installation." >&2;		\
+@ENABLE_SK_TRUE@	  exit 1; }
+	xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; }
+
+.PHONY: omf
+omf: $(_DOC_OMF_ALL)
+
+.PHONY: po
+po: $(_DOC_POFILES)
+
+.PHONY: mo
+mo: $(_DOC_MOFILES)
+
+$(_DOC_POFILES):
+	@if ! test -d $(dir $@); then \
+	  echo "mkdir $(dir $@)"; \
+	  mkdir "$(dir $@)"; \
+	fi
+	@if test ! -f $@ -a -f $(srcdir)/$@; then \
+	  echo "cp $(srcdir)/$@ $@"; \
+	  cp "$(srcdir)/$@" "$@"; \
+	fi;
+	@docs=; \
+	list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \
+	  docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \
+	done; \
+	if ! test -f $@; then \
+	  echo "(cd $(dir $@) && \
+	    $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \
+	    cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \
+	  (cd $(dir $@) && \
+	    $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \
+	    cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \
+	else \
+	  echo "(cd $(dir $@) && \
+	    $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs)"; \
+	  (cd $(dir $@) && \
+	    $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs); \
+	fi
+
+$(_DOC_MOFILES): %.mo: %.po
+	@if ! test -d $(dir $@); then \
+	  echo "mkdir $(dir $@)"; \
+	  mkdir "$(dir $@)"; \
+	fi
+	msgfmt -o $@ $<
+
+# FIXME: fix the dependancy
+# FIXME: hook xml2po up
+$(_DOC_LC_DOCS) : $(_DOC_MOFILES)
+$(_DOC_LC_DOCS) : $(_DOC_C_DOCS)
+	if ! test -d $(dir $@); then mkdir $(dir $@); fi
+	if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \
+	mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \
+	if [ -f "$${mo}" ]; then mo="../$${mo}"; else mo="$(_DOC_ABS_SRCDIR)/$${mo}"; fi; \
+	(cd $(dir $@) && \
+	  $(_xml2po) -m $(_xml2po_mode) -e -t "$${mo}" \
+	    "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \
+	    cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)
+.PHONY: pot
+pot: $(_DOC_POT)
+$(_DOC_POT): $(_DOC_C_DOCS_NOENT)
+	$(_xml2po) -m $(_xml2po_mode) -e -o $@ $^
+
+$(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS)
+	xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@)
+
+################################################################################
+
+all:							\
+	$(_DOC_C_DOCS)		$(_DOC_LC_DOCS)		\
+	$(_DOC_OMF_ALL)		$(_DOC_DSK_ALL)		\
+	$(_DOC_HTML_ALL)	$(_DOC_POFILES)
+
+################################################################################
+
+.PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir
+
+clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML)
+clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML)
+clean-doc-lc:
+	rm -f $(_DOC_LC_DOCS)
+	rm -f $(_DOC_MOFILES)
+	@list='$(_DOC_POFILES)'; for po in $$list; do \
+	  if ! test "$$po" -ef "$(srcdir)/$$po"; then \
+	    echo "rm -f $$po"; \
+	    rm -f "$$po"; \
+	  fi; \
+	done
+#	.xml2.po.mo cleaning is obsolete as of 0.18.1 and could be removed in 0.20.x
+	@for lc in C $(_DOC_REAL_LINGUAS); do \
+	  if test -f "$$lc/.xml2po.mo"; then \
+	    echo "rm -f $$lc/.xml2po.mo"; \
+	    rm -f "$$lc/.xml2po.mo"; \
+	  fi; \
+	done
+clean-doc-dir: clean-doc-lc
+	@for lc in C $(_DOC_REAL_LINGUAS); do \
+	  for dir in `find $$lc -depth -type d`; do \
+	    if ! test $$dir -ef $(srcdir)/$$dir; then \
+	      echo "rmdir $$dir"; \
+	      rmdir "$$dir"; \
+	   fi; \
+	  done; \
+	done
+
+clean-local:						\
+	$(_clean_omf)		$(_clean_dsk)		\
+	$(_clean_lc)		$(_clean_dir)
+distclean-local:					\
+	$(_clean_omf)		$(_clean_dsk)		\
+	$(_clean_lc)		$(_clean_dir)
+mostlyclean-local:					\
+	$(_clean_omf)		$(_clean_dsk)		\
+	$(_clean_lc)		$(_clean_dir)
+maintainer-clean-local:					\
+	$(_clean_omf)		$(_clean_dsk)		\
+	$(_clean_lc)		$(_clean_dir)
+
+################################################################################
+
+.PHONY: dist-doc-docs dist-doc-pages dist-doc-figs dist-doc-omf dist-doc-dsk
+doc-dist-hook: 						\
+	$(if $(DOC_MODULE)$(DOC_ID),dist-doc-docs)	\
+	$(if $(_DOC_C_FIGURES),dist-doc-figs)		\
+	$(if $(_DOC_OMF_IN),dist-doc-omf)
+#	$(if $(_DOC_DSK_IN),dist-doc-dsk)
+
+dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)
+	@for lc in C $(_DOC_REAL_LINGUAS); do \
+	  echo " $(mkinstalldirs) $(distdir)/$$lc"; \
+	  $(mkinstalldirs) "$(distdir)/$$lc"; \
+	done
+	@list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \
+	for doc in $$list; do \
+	  if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \
+	    docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+	    if ! test -d "$(distdir)/$$docdir"; then \
+	      echo "$(mkinstalldirs) $(distdir)/$$docdir"; \
+	      $(mkinstalldirs) "$(distdir)/$$docdir"; \
+	    fi; \
+	  echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \
+	  $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \
+	done
+
+dist-doc-figs: $(_DOC_SRC_FIGURES)
+	@list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \
+	for fig in $$list; do \
+	  if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$fig"; then \
+	    figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+	    if ! test -d "$(distdir)/$$figdir"; then \
+	      echo "$(mkinstalldirs) $(distdir)/$$figdir"; \
+	      $(mkinstalldirs) "$(distdir)/$$figdir"; \
+	    fi; \
+	    echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \
+	    $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \
+	  fi; \
+	done;
+
+dist-doc-omf:
+	@if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \
+	echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \
+	$(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))"
+
+dist-doc-dsk:
+	@if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \
+	echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \
+	$(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))"
+
+################################################################################
+
+.PHONY: check-doc-docs check-doc-omf
+check:							\
+	$(if $(DOC_MODULE),check-doc-docs)		\
+	$(if $(DOC_ID),check-doc-pages)			\
+	$(if $(_DOC_OMF_IN),check-doc-omf)
+
+check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS)
+	@for lc in C $(_DOC_REAL_LINGUAS); do \
+	  if test -f "$$lc"; \
+	    then d=; \
+	    xmlpath="$$lc"; \
+	  else \
+	    d="$(srcdir)/"; \
+	    xmlpath="$$lc:$(srcdir)/$$lc"; \
+	  fi; \
+	  echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \
+	  xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \
+	done
+
+check-doc-pages: $(_DOC_C_PAGES) $(_DOC_LC_PAGES)
+	for lc in C $(_DOC_REAL_LINGUAS); do \
+	  if test -f "$$lc"; \
+	    then d=; \
+	    xmlpath="$$lc"; \
+	  else \
+	    d="$(srcdir)/"; \
+	    xmlpath="$$lc:$(srcdir)/$$lc"; \
+	  fi; \
+	  for page in $(DOC_PAGES); do \
+	    echo "xmllint --noout --noent --path $$xmlpath --xinclude --relaxng $(_malrng) $$d$$lc/$$page"; \
+	    xmllint --noout --noent --path "$$xmlpath" --xinclude --relaxng "$(_malrng)" "$$d$$lc/$$page"; \
+	  done; \
+	done
+
+check-doc-omf: $(_DOC_OMF_ALL)
+	@list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+	  echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \
+	  xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \
+	done
+
+################################################################################
+
+.PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk
+
+install-data-local:					\
+	$(if $(DOC_MODULE)$(DOC_ID),install-doc-docs)	\
+	$(if $(_DOC_HTML_ALL),install-doc-html)		\
+	$(if $(_DOC_C_FIGURES),install-doc-figs)	\
+	$(if $(_DOC_OMF_IN),install-doc-omf)
+#	$(if $(_DOC_DSK_IN),install-doc-dsk)
+
+install-doc-docs:
+	@for lc in C $(_DOC_REAL_LINGUAS); do \
+	  echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc"; \
+	  $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc; \
+	done
+	@list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \
+	  if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \
+	  docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+	  docdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$docdir"; \
+	  if ! test -d "$$docdir"; then \
+	    echo "$(mkinstalldirs) $$docdir"; \
+	    $(mkinstalldirs) "$$docdir"; \
+	  fi; \
+	  echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+	  $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc; \
+	done
+
+install-doc-figs:
+	@list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \
+	  for lc in C $(_DOC_REAL_LINGUAS); do \
+	    figsymlink=false; \
+	    if test -f "$$lc/$$fig"; then \
+	      figfile="$$lc/$$fig"; \
+	    elif test -f "$(srcdir)/$$lc/$$fig"; then \
+	      figfile="$(srcdir)/$$lc/$$fig"; \
+	    else \
+	      figsymlink=true; \
+	    fi; \
+	    figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+	    figdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$figdir"; \
+	    if ! test -d "$$figdir"; then \
+	      echo "$(mkinstalldirs) $$figdir"; \
+	      $(mkinstalldirs) "$$figdir"; \
+	    fi; \
+	    figbase=`echo $$fig | sed -e 's/^.*\///'`; \
+	    if $$figsymlink; then \
+	      echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \
+	      ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \
+	    else \
+	      echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \
+	      $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \
+	    fi; \
+	  done; \
+	done
+
+install-doc-html:
+	echo install-html
+
+install-doc-omf:
+	$(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)
+	@list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+	  echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+	  $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf; \
+	done
+	@if test "x$(_ENABLE_SK)" = "xtrue"; then \
+	  echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \
+	  scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \
+	fi;
+
+install-doc-dsk:
+	echo install-dsk
+
+################################################################################
+
+.PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk
+uninstall-local:					\
+	$(if $(DOC_MODULE)$(DOC_ID),uninstall-doc-docs)	\
+	$(if $(_DOC_HTML_ALL),uninstall-doc-html)	\
+	$(if $(_DOC_C_FIGURES),uninstall-doc-figs)	\
+	$(if $(_DOC_OMF_IN),uninstall-doc-omf)
+#	$(if $(_DOC_DSK_IN),uninstall-doc-dsk)
+
+uninstall-doc-docs:
+	@list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \
+	  echo " rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+	  rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+	done
+
+uninstall-doc-figs:
+	@list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \
+	  echo "rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \
+	  rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \
+	done;
+
+uninstall-doc-omf:
+	@list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+	  if test "x$(_ENABLE_SK)" = "xtrue"; then \
+	    echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+	    scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+	  fi; \
+	  echo "rm -f $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+	  rm -f "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+	done
+
+dist-hook: doc-dist-hook
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: