diff options
Diffstat (limited to 'app/help/genhelp.in')
| -rw-r--r-- | app/help/genhelp.in | 705 |
1 files changed, 705 insertions, 0 deletions
diff --git a/app/help/genhelp.in b/app/help/genhelp.in new file mode 100644 index 0000000..b15a727 --- /dev/null +++ b/app/help/genhelp.in @@ -0,0 +1,705 @@ +Help Invokes on-line help for this dialog +cancel Cancels this command +Close Closes the dialog +# +cmdAbout About box dialog +cmdAbove Move Selected object to top +cmdAddElevations Raise or Lower all Selected tracks +cmdBelow Move Selected object to bottom +cmdBlockCreate Create Block +cmdBlockDelete Delete Block +cmdBlockEdit Edit Block +cmdBlockSetCmd Block +cmdCarDesc Create a new Car/Loco description +cmdCarInventory Manage your Car and Loco Inventory +cmdCircleCenter Create track circle from center cmdCircle +cmdCircleFixedRadius Create fixed radius track circle cmdCircle +#cmdCircleMode Default Circle creation mode cmdCircle +cmdCircleSetCmd Set Circle Track creation mode cmdCircle +cmdCircleTangent Create track circle from tangent cmdCircle +cmdClearElevations Removes elevation from Selected tracks +cmdCmdopt Command Options dialog +cmdColor Controls colors +cmdConnect Connect two tracks +cmdCopy Copy selected objects to clipboard +cmdCurveCenter Create curved track from center cmdCurve +cmdCurveChord Create curved track from chord cmdCurve +cmdCurveEndPt Create curved track from end-point cmdCurve +cmdCurveSetCmd Set Curve Track creation mode cmdCurve +cmdCurveTangent Create curved track from tangent cmdCurve +cmdCustmgm Manipulate Custom designer entries +cmdCut Moves selected objects to clipboard +cmdDelete Delete objects +cmdDemo Playback demos +cmdDescribe Describe objects +cmdDeselectAll Deselect all selected objects cmdSelect +cmdDisplay Change Display parameters +cmdDrawBench Create benchwork cmdDraw +cmdDrawBox Create a box cmdDraw +cmdDrawCircleSetCmd Set Circle drawing command cmdDraw +cmdDrawCircle Create a circle cmdDraw +cmdDrawCircleCenter Draw a circle line from center cmdDraw +cmdDrawCircleFixedRadius Draw a fixed radius circle line cmdDraw +cmdDrawCircleTangent Draw a circle line from tangent cmdDraw +cmdDrawCurveSetCmd Set Curve drawing command cmdDraw +cmdDrawCurve Create a curved line cmdDraw +cmdDrawCurveEndPt Create a curved line from End cmdDraw +cmdDrawCurveCenter Create a curved line from center cmdDraw +cmdDrawCurveChord Create a curved line from chord cmdDraw +cmdDrawCurveTangent Create a curved line from tangent cmdDraw +cmdDrawDimLine Create a dimension line cmdDraw +cmdDrawFilledBox Create a filled box cmdDraw +cmdDrawFilledCurve Create a filled circle cmdDraw +cmdDrawFilledCircleCenter Draw a filled circle from center cmdDraw +cmdDrawFilledCircleFixedRadius Draw a fixed radius filled circle cmdDraw +cmdDrawFilledCircleTangent Draw a filled circle from tangent cmdDraw +cmdDrawPolygon Create a filled polygon cmdDraw +cmdDrawPolyline Create a polyline cmdDraw +cmdDrawLine Create a straight line cmdDraw +cmdDrawLineSetCmd Set Line drawing command cmdDraw +cmdDrawShapeSetCmd Set Shape drawing command cmdDraw +cmdDrawTableEdge Draw table edge cmdDraw +cmdEasement Easement menu +cmdElevation Change Elevations +cmdEnumerate Generate a Parts List of selected objects +cmdExport Export a .xti file +cmdExportDXF Export a DXF file +cmdFileNote General note about the layout +cmdFlip Flip selected objects +cmdGrid Adjust snap grid +cmdGridEnable Enable snap grid cmdGrid +cmdGridShow Show snap grid cmdGrid +cmdGroup Create a structure from a Group of objects +cmdHandLaidTurnout Create a hand-laid turnout +cmdHelix Create a track helix +#cmdHotBar Place a turnout or structure +cmdImport Import a .xti file cmdExport +cmdJoin Join two tracks +cmdLayer Change Layers +cmdLayerSet Selects the current drawing layer cmdLayer +#cmdLayerShow0 Shows or hides layers cmdLayer +#cmdLayerShow1 Shows or hides layers cmdLayer +#cmdLayerShow10 Shows or hides layers cmdLayer +#cmdLayerShow11 Shows or hides layers cmdLayer +#cmdLayerShow12 Shows or hides layers cmdLayer +#cmdLayerShow13 Shows or hides layers cmdLayer +#cmdLayerShow14 Shows or hides layers cmdLayer +#cmdLayerShow15 Shows or hides layers cmdLayer +#cmdLayerShow16 Shows or hides layers cmdLayer +#cmdLayerShow17 Shows or hides layers cmdLayer +#cmdLayerShow18 Shows or hides layers cmdLayer +#cmdLayerShow19 Shows or hides layers cmdLayer +#cmdLayerShow2 Shows or hides layers cmdLayer +#cmdLayerShow3 Shows or hides layers cmdLayer +#cmdLayerShow4 Shows or hides layers cmdLayer +#cmdLayerShow5 Shows or hides layers cmdLayer +#cmdLayerShow6 Shows or hides layers cmdLayer +#cmdLayerShow7 Shows or hides layers cmdLayer +#cmdLayerShow8 Shows or hides layers cmdLayer +#cmdLayerShow9 Shows or hides layers cmdLayer +cmdLayout Layout parameters +#cmdLoosen Disconnect tracks at loose joints nohelp +cmdModify Modify or extend a track +cmdMove Move selected objects +cmdMoveLabel Move a label +cmdMoveToCurrentLayer Move selected objects to current layer +cmdNote Place a note on the layout +cmdOutputbitmap Print a BitMap +cmdParallel Create a parallel track +cmdParameter Register register +cmdPaste Copy objects from clipboard +cmdPref Perferences dialog +cmdPricelist Display prices of turnouts, sectional tracks and structures +cmdPrint Print the layout +cmdPrmfile Loads and unloads parameter files +cmdProfile Elevation Profile Command +cmdProfileDraw Profile cmdProfile +cmdRecord Command recorder +cmdRedo Redo last undo +cmdRefreshCompound Update selected Turnout and Structure definitions +cmdRescale Rescale selected objects +cmdRotate Rotate selected object(s) +cmdRuler Show a ruler +cmdSelect Select objects +cmdSelectAll Selects all objects on the layout cmdSelect +cmdSelectCurrentLayer Selects all objects in the current Layer layer +cmdSelectInvert Invert current selection +cmdSplitTrack Split a track +cmdSelectOrphaned Select stranded (unconnected) track pieces +cmdSticky Choose which commands are sticky +cmdStraight Create straight track +cmdStructure Place a structure on the layout +cmdSwitchMotorCreate Create Switch Motor +cmdSwitchMotorDelete Delete Switch Motor +cmdSwitchMotorEdit Edit Switch Motor +cmdSwitchMotorSetCmd Switch Motors +cmdText Enter text on the layout +cmdTextSize Controls the size of the entered text cmdText +#cmdTighten Remove slack from connected tracks +cmdTip Tip of the Day window +cmdTrain Run Trains +cmdTrainPause Pause/Resume Trains cmdTrain +cmdTrainNewCar Place a car on the layout cmdTrain +cmdTrainExit Exit Trains cmdTrain +cmdTunnel Hide/Unhide a track +cmdTurnout Place a turnout or sectional track +cmdTurnoutNew Create a new turnout definition +cmdTurntable Place a turntable +cmdUpdatetitle Updates old source files with 3 part titles +cmdUndo Undo last command +cmdUngroup Ungroup objects +cmdWidth0 Draw tracks with thin lines editM +cmdWidth2 Draw tracks with medium lines editM +cmdWidth3 Draw tracks with thick lines editM +cmdZoom Change drawing scale editZoom +cmdZoomIn Zoom in editZoomIn +cmdZoomOut Zoom out editZoomOut +# +# +menuFile File Menu +menuFile-save Save layout +menuFile-saveAs Save layout under a new name +menuFile-clear New layout +menuFile-enum Generate parts list +menuFile-load Load a layout +menuFile-quit Exit the program +menuFile-revert Revert to last saved state of layout plan +# +editM Edit menu +menuEdit-redraw Redraw layout +menuEdit-zoomIn Zoom in +menuEdit-zoomOut Zoom out +# +toolsM Tools menu +# +menuView View menu +menuToolbar Toolbar configuration +# +menuTools Tools menu +# +menuOption Options menu +# +menuMacro Playback/Record commands +# +menuWindow Window menu +# +menuHelp Help menu +menuHelpRecentMessages Recent error messages and explanations menuHelp +# +# +hotBarLeft Move Hot Bar left cmdHotBar +hotBarRight Move Hot Bar right cmdHotBar +infoBarCount Total track count statusBar +infoBarPosX X Position of cursor statusBar +infoBarPosY Y Position of cursor statusBar +infoBarScale Drawing scale statusBar +infoBarStatus Message and status line statusBar +main-draw Main layout canvas +mainDraw Main layout canvas +main-canvas Main drawing canvas +main-commandbar Command buttons +main-menubar Menus +main-titlebar Tile, Filename and Window Manager buttons +main-hotbar Turnout and Structure Hot Bar +main-layers Active layer list and layer buttons +map-draw Map window +map-hilight This is the portion of the layout shown in the Main Window canvas +# +# +addElev-value Raise or Lower all Selected Track cmdAddElevations +# +carpart-ok Add or Update car object cmdCarInventory +carpart-manuf Manufacturer name cmdCarInventory +carpart-prototype Car Prototype cmdCarInventory +carpart-prototype-list Car Prototype cmdCarInventory +carpart-isLoco Is the Car a Locomotive? cmdCarInventory +carpart-partno-list Part Number and Description cmdCarInventory +carpart-partno Manufacturer Part Number cmdCarInventory +carpart-import Use the Selected figure as the car image cmdCarInventory +carpart-reset Use the default figure as the car image cmdCarInventory +carpart-desc Optional description of the Car Part cmdCarInventory +carpart-flip Flip car image cmdCarInventory +carpart-dispmode Display Car Item information or reporting marks and dimensions cmdCarInventory +carpart-road Full Roadname cmdCarInventory +carpart-type Car Type cmdCarInventory +carpart-protokind-list Car Type cmdCarInventory +carpart-repmark Reporting Marks (Roadname abbreviation) cmdCarInventory +carpart-number Car Number cmdCarInventory +carpart-bodyColor Car body Color cmdCarInventory +carpart-carLength Length of car body cmdCarInventory +carpart-carWidth Width of car body cmdCarInventory +carpart-trkCenter Distance between Trucks cmdCarInventory +carpart-cplrMount Coupler are mounted on body or truck cmdCarInventory +carpart-cpldLen Overall Coupled Length cmdCarInventory +carpart-cplrLen Coupler Length from end of car cmdCarInventory +carpart-canvas Diagram of Car cmdCarInventory +carpart-index Item Index Number cmdCarInventory +carpart-purchPrice Original Purchase Price cmdCarInventory +carpart-currPrice Current Price cmdCarInventory +carpart-condition Condition of car cmdCarInventory +carpart-purchDate Original Purchase Date cmdCarInventory +carpart-serviceDate Last Service Date cmdCarInventory +carpart-quantity Number of identical cars to be entered cmdCarInventory +carpart-multinum Do all the cars have the same Number? cmdCarInventory +carpart-notes Notes about the car cmdCarInventory +carpart-new Create a new car Part or Prototype definitions cmdCarInventory +carpart-new-menu Create a new car Part or Prototype definitions cmdCarInventory + +# +carinv-ok Finds the selected Car Item on the layout cmdCarInvertory +carinv-sort1 Sort the Item list cmdCarInvertory +carinv-sort2 Sort the Item list cmdCarInvertory +carinv-sort3 Sort the Item list cmdCarInvertory +carinv-sort4 Sort the Item list cmdCarInvertory +carinv-list cmdCarInvertory +carinv-edit Edit the selected Car Item cmdCarInvertory +carinv-add Add a new Car Item cmdCarInvertory +carinv-delete Delete the selected Car Items cmdCarInvertory +carinv-import Import a Car Item .csv file cmdCarInvertory +carinv-export Export a Car Item .csv file cmdCarInvertory +carinv-savetext Create a text list of the Car Items cmdCarInvertory +# +circle-radius Specifies the radius of the circle track cmdCircle +# +cmdopt-move-quick How to draw track being moved/rotated cmdCmdopt +cmdopt-preselect Default command is Describe or Select cmdCmdopt +cmdopt-rightclickmode Action to invoke on Right-Click cmdCmdopt +cmdopt-ok cmdCmdopt +# +contents-label Contents Label for new Parameter file cmdCustmgm +# +custmgm-inx List of custom designed turnouts and structures cmdCustmgm +custmgm-edit Invoke designer editor cmdCustmgm +custmgm-delete Remove selected entries cmdCustmgm +custmgm-export Copy selected entries to Parameter File cmdCustmgm +custmgm-new Create a New part or prototype cmdCustmgm +custmgm-ok Update custom file and close cmdCustmgm +# +demo-step Executes the next step of the demo cmdDemo +demo-next Skip to next demo cmdDemo +demo-quit Stops the demonstration and returns you to XTrackCAD cmdDemo +demo-speed Select speed of Playback cmdDemo +demo-text This is where comments about the demo are displayed cmdDemo +# +describe-F1 +describe-F2 +describe-F3 +describe-F4 +describe-F5 +describe-F6 +describe-F7 +describe-F8 +describe-F9 +describe-F10 +describe-F11 +describe-F12 +describe-F13 +describe-F14 +describe-F15 +describe-F16 +describe-F17 +describe-F18 +describe-F19 +describe-F20 +describe-I1 +describe-I2 +describe-I3 +describe-I4 +describe-I5 +describe-S1 +describe-S2 +describe-S3 +describe-Y1 +describe-C1 +describe-L1 +describe-L2 +describe-LE1 +describe-T1 +describe-P1 +# +display-autoPan Move the Main canvas if you drag near the edge cmdDisplay +display-color-layers Color tracks or other objects by layer +display-tunnels Controls the drawing of hidden tracks cmdDisplay +display-endpt Controls the drawing of End-Points cmdDisplay +display-tiedraw How to draw track ties cmdDisplay +display-centerdraw Show crosshair at center of curves cmdDisplay +display-tworailscale Drawing scale when to draw tracks with 2 rails cmdDisplay +display-mapscale Drawing scale of the map window cmdDisplay +display-livemap Whether the main layout is updated while dragging on the Map cmdDisplay +display-labelenable Enable labels for Turnouts, Flextrack Lengths and Elevations cmdDisplay +display-labelscale When to label Turnout, Flextrack Lengths and Elevations cmdDisplay +display-description-fontsize Font size for labels on layout cmdDisplay +display-hotbarlabels Label elements on the Hot Bar cmdDisplay +display-layoutlabels Label elements on layout cmdDisplay +display-listlabels Label elements for lists cmdDisplay +display-carhotbarlabels How to group cars on the Train Hot Bar cmdDisplay +display-trainpause Delay (in mS) between updating train movements cmdDisplay +display-hideTrainsInTunnels Don't show trains in tunnels when tunnels are hidden cmdDisplay +#display-ok Update the display cmdDisplay +display-ok cmdDisplay +# +draw-linewidth Width of the lines cmdDraw +draw-linecolor Color of the lines cmdDraw +draw-benchlist List of types of Lumber cmdDraw +draw-benchcolor Color of Benchwork cmdDraw +draw-benchorient Orientation of Benchwork cmdDraw +draw-arrowsize Size of Dimension Arrows cmdDraw +# +easement-val This controls the sharpness of the easement curve cmdEasement +easement-r Minumum radius cmdEasement +easement-x Maximum offset cmdEasement +easement-l Easement length cmdEasement +easement-radio These radio buttons are a short-cut for Values of 0.0, 0.5, 1.0 and 2.0. None turns Easements off cmdEasement +easement-ok Complete easement selection cmdEasement +# +elev-mode Type of elevation cmdElevation +elev-value Height of End Point cmdElevation +elev-computed Compute elevation based on neighbors cmdElevation +elev-grade Compute grade based on neighbors cmdElevation +elev-station Specify a name for an End-Point cmdElevation +elev-ok cmdElevation +# +enum-print Print parts list cmdEnumerate +enum-printsetup Invoke the Print Setup dialog printSetup +enum-save Save parts list to file cmdEnumerate +enum-text This is the list of parts for the layout cmdEnumerate +enum-list-prices Enable prices on the Parts List cmdEnumerate +# +grid-horzspacing Spacing between major grid lines cmdGrid +grid-horzdivision Allows the spacing to be subdivided cmdGrid +grid-horzenable Specifies if positions are snaped in this direction cmdGrid +grid-vertspacing Spacing between major grid lines cmdGrid +grid-vertdivision Allows the spacing to be subdivided cmdGrid +grid-vertenable Specifies if positions are snaped in this direction cmdGrid +grid-origx Shows the origin and angle of the grid cmdGrid +grid-origy Shows the origin and angle of the grid cmdGrid +grid-origa Shows the origin and angle of the grid cmdGrid +grid-show Specifies if the grid is shown cmdGrid +grid-ok Completes the grid specification cmdGrid +# +group-manuf Manufacturer cmdGroup +group-desc Description cmdGroup +group-partno Part Number cmdGroup +group-segcnt Number of segments in Group cmdGroup +group-replace Replace the Selected object with the new definition? cmdGroup +group-ok Creates a new Structure (or Turnout) cmdGroup +# +helix-elev Elevation difference of Helix End-Points cmdHelix +helix-radius Helix Radius cmdHelix +helix-turns Number of turns in the helix cmdHelix +helix-angSep Angle betweek helix entrance and exit cmdHelix +helix-grade Grade in helix cmdHelix +helix-vertSep Separation between helix layers cmdHelix +# +layer-layer Layer list cmdLayer +layer-name Layer Name cmdLayer +layer-color Color of layer cmdLayer +layer-visible Layer is drawn on Main window cmdLayer +layer-frozen Layer cannot be changed cmdLayer +layer-onmap Layer is drawn on Map window cmdLayer +layer-button-count Number of layer buttons to show cmdLayer +layer-object-count Number of objects in this layer cmdLayer +layer-ok cmdLayer +layer-reset Load layer configuration from default cmdLayer +layer-save Save current layer configuration as default cmdLayer +layer-clear Overwrite layer configuration with system default values cmdLayer +# +layout-roomsizeX Specifies the size of the room (in inches or centimeters) cmdLayout +layout-roomsizeY Specifies the size of the room (in inches or centimeters) cmdLayout +layout-title1 Specifies the layout Title that will appear on printouts cmdLayout +layout-title2 Specifies the layout Subtitle that will appear on printouts cmdLayout +layout-scale Specifies the Modelling Scale cmdLayout +layout-gauge Specifies the rail gauge, ie. the distance between the rails cmdLayout +layout-mintrackradius Specifies minimum track radius (in inches or centimeters). Tracks with a smaller radius are considered exceptional. cmdLayout +layout-maxtrackgrade Specifies maximum track elevation expressed as a percent (%). Tracks with a larger elevation are considered exceptional. cmdLayout +# +newcar-road Roadname cmdTrain +newcar-number Car Number cmdTrain +# +note-text This is the body of the Note. To change this select Modify from the File Menu cmdNote +note-ok cmdNote +# +outputbitmap-density Specifies number of pixels per inch (or centimeter) cmdOutputbitmap +outputbitmap-ok cmdOutputbitmap +outputbitmap-toggles Specifies whether Layout Titles, Borders or Track Centerlines are printed on the BitMap cmdOutputbitmap +# +parallel-separation Specifies the separation between parallel tracks cmdParallel +# +parameter-name Enter your name as specified in the XTrackCAD Registration Notice register +parameter-key Enter the key value as specified in the XTrackCAD Registration Notice register +parameter-ok Validates the name and key. Terminates the registration command register +# +pref-anglesystem 0° is up or to the right cmdPref +pref-units Choose english (inches) or metric (centimeters) cmdPref +pref-dstfmt How to display length measurements cmdPref +pref-minlength Do not create tracks to be shorter than this value cmdPref +pref-connectdistance Maximum distance between connected end points cmdPref +pref-connectangle Minimum angle between connected End-Points cmdPref +pref-turntable-angle Specifies the minimum angle between tracks connected to a turntable cmdPref +pref-coupling-speed-max Trains will crash above this speed cmdPref +pref-balloonhelp Enable/Disable balloon popup help windows cmdPref +pref-dragpixels How far you can move the mouse before its considered a drag cmdPref +pref-dragtimeout How long you can hold a mouse button down before its considered a drag cmdPref +pref-mingridspacing Minimum distance (in pixels) between grid lines/ticks cmdPref +pref-checkpoint Specifies the Check Point frequency; number of modifications made since the last save. cmdPref +pref-onstartup Resume work on last layout or start with new layout cmdPref +pref-ok cmdPref +# +pricelist-cost Updated cost of current selected item cmdPricelist +pricelist-entry Item cmdPricelist +pricelist-inx Selection list for prices cmdPricelist +pricelist-flexlen Price of specified length of flex-track cmdPricelist +pricelist-flexunit Price of specified length of flex-track cmdPricelist +pricelist-flexcost Price of specified length of flex-track cmdPricelist +pricelist-ok cmdPricelist +# +print-scale Controls the reduction (scale) of the printout cmdPrint +print-pagew Scaled page width (Scale times physical page width) cmdPrint +print-max Sets page size to the maximum (based on scale and physical page size) cmdPrint +print-pageh Scaled page height (Scale times physical page height) cmdPrint +print-snapshot Sets scale, origin and angle for a one page printout of the layout cmdPrint +print-format Print page in Portrait or Landscape format cmdPrint +print-order Order of printing pages cmdPrint +print-style Print Title, Date, Author and other information at bottom of page? cmdPrint +print-physsize Ignore unprintable page margins? cmdPrint +print-registrationMarks Print Registration Marks at 1:1? cmdPrint +print-grid Print Snap Grid? cmdPrint +print-ruler Print Rulers on all page edges? cmdPrint +print-roadbed Print Roadbed Outline? cmdPrint +print-roadbedWidth Print Roadbed Outline cmdPrint +print-origx Origin of the print grid. This is useful if you want to reprint a set of pages cmdPrint +print-origy Origin of the print grid. This is useful if you want to reprint a set of pages cmdPrint +print-reset Resets the origin and angle to 0 cmdPrint +print-origa Origin of the print grid. This is useful if you want to reprint a set of pages cmdPrint +print-clear Deselects all pages cmdPrint +print-setup Invoke the Print Setup dialog printSetup +print-ok Print selected pages and terminates the print command cmdPrint +# +prmfile-inx List of loaded and unloaded parameter files cmdPrmfile +prmfile-mode Show parameter files by names or descriptions cmdPrmfile +prmfile-action Toggle the loaded status of the selected parameter file cmdPrmfile +prmfile-browse Find a parameter file for loading cmdPrmfile +prmfile-ok Update parameter file list cmdPrmfile +# +profile-canvas Profile of specified path cmdProfile +profile-clear Clear the profile cmdProfile +profile-print Print the profile cmdProfile +profile-ok cmdProfile +# +record-stop Stop recording cmdRecord +record-message Insert a message cmdRecord +record-end End a message cmdRecord +record-text Message body cmdRecord +# +refreshSpecial-list Possible turnouts cmdRefreshSpecial +refreshSpecial-skip Skip this turnout cmdRefreshSpecial +refreshSpecial-ok cmdRefreshSpecial +# +rename-manuf Manufacturer of Object cmdCustmgm +rename-desc Description of Object cmdCustmgm +rename-partno Part Nuber of Object cmdCustmgm +rename-ok cmdCustmgm +# +rescale-toggle Rescale by Scale Conversion or by Ratio cmdRescale +rescale-fromS Original Scale of the selected objects cmdRescale +rescale-fromG Original Gauge of the selected objects cmdRescale +rescale-toS New Scale of the selected objects cmdRescale +rescale-toG New Gauge of the selected objects cmdRescale +rescale-change-dim Change track dimensions to new scale cmdRescale +rescale-ratio Change size by this amount cmdRescale +rescale-ok cmdRescale +# +rgbcolor-snapgrid Snap Grid Line and Division cmdRgbcolor +rgbcolor-marker X and Y position markers cmdRgbcolor +rgbcolor-border Border rulers, room boundaries and table edges cmdRgbcolor +rgbcolor-crossmajor Primary Axis of grid rotation cmdRgbcolor +rgbcolor-crossminor Secondary Axis of grid rotation cmdRgbcolor +rgbcolor-normal Unselected tracks cmdRgbcolor +rgbcolor-selected Selected tracks cmdRgbcolor +rgbcolor-profile Color of tracks on the Profile path cmdRgbcolor +rgbcolor-exception Color of Exceptional tracks cmdRgbcolor +rgbcolor-tie Color of track ties cmdRgbcolor +rgbcolor-ok Updates the colors cmdRgbcolor +# +rotate-rotate Angle in degrees cmdRotate +rotate-ok Rotate object(s) by specified amount cmdRotate +# +sticky-set Choose commands to be sticky cmdSticky +sticky-ok Make the commands sticky cmdSticky +# +structure-list List of available structure cmdStructure +structure-canvas Diagram of the selected structure cmdStructure +structure-hide Hide Selection window when placing Structure cmdStructure +structure-stats Drawing scale and size cmdStructure +structure-ok Complete structure placement cmdStructure +# +structure-pier-inx Choose a Pier number cmdStructure +# +text-fontsize Controls the size of the entered text cmdText +# +tip-text Useful information about the program cmdTip +tip-showatstart Show Tip of the Day every time the program starts cmdTip +tip-next Show the next Tip of the Day cmdTip +tip-prev Show the previous Tip of the Day cmdTip +tip-ok cmdTip +# +toolbarM Controls which Command Buttons are displayed +# +train-newcar-index List of Cars cmdTrain +train-list List of active trains cmdTrain +train-speed Speed cmdTrain +train-distance Train odometer cmdTrain +train-zeroDistance Reset odometer to 0 cmdTrain +train-goto Find train on layout cmdTrain +train-follow Follow train around layout cmdTrain +train-autoreverse Flip direction at End Of Track cmdTrain +train-direction Change direction of train cmdTrain +train-stop Stop the train cmdTrain +# +turnout-list List of available turnouts for the current scale cmdTurnout +turnout-canvas Diagram of the currently selected turnout. Click on a End-Point to select the Active End-Point cmdTurnout +turnout-new A menu list of various type of turnouts and sectional tracks you can define +turnout-hide Hide Selection window when placing Turnout cmdTurnout +turnout-activeEndPoint The selected Active End-Point cmdTurnout +turnout-current Current selected turnout, (displayed in the diagram window) cmdTurnout +turnout-endPoint One the End-Points that can be selected cmdTurnout +turnout-ok cmdTurnout +# +turnoutNew-angle1 Angle of the specified track to the center line of the turnout +turnoutNew-angle2 Angle of the specified track to the center line of the turnout +turnoutNew-angleMode Specifies if angles are entered as Frog Numbers or in degrees cmdTurnoutNew +turnoutNew-desc1 Desciption +turnoutNew-desc2 Desciption +turnoutNew-label Turnout description (Manuf., Size, Part Number, etc) cmdTurnoutNew +turnoutNew-len0 Length from the base to the end of the specified track +turnoutNew-len1 Length from the base to the end of the specified track +turnoutNew-len2 Length from the base to the end of the specified track +turnoutNew-manuf Manufacturer +turnoutNew-off1 Offset of the track End-Point from the center line of the turnout +turnoutNew-off2 Offset of the track End-Point from the center line of the turnout +turnoutNew-partno1 Part Number +turnoutNew-partno2 Part Number +turnoutNew-print Prints a full size diagram of the turnout for checking cmdTurnoutNew +turnoutNew-ok Prints a full size diagram of the turnout for checking cmdTurnoutNew +turnoutNew-color Color of Roadbed lines cmdTurnoutNew +turnoutNew-roadbedLineWidth Width of Roadbed lines cmdTurnoutNew +turnoutNew-roadbedWidth Width of Roadbed cmdTurnoutNew +turnoutNew-printsetup Invoke the Print Setup dialog printSetup +turnoutNew-done Closes the window and returns to the Turnout Selection window cmdTurnoutNew +# +turntable-diameter Specifies the diameter of the turntable cmdTurntable +# +updatetitle-old Old Turnout title cmdUpdatetitle +updatetitle-sel List of available titles cmdUpdatetitle +updatetitle-ignore Leave the Turnouts' title unchanged cmdUpdatetitle +updatetitle-load Invoke the Parameter Files dialog cmdUpdatetitle +updatetitle-list List of available turnouts cmdUpdatetitle +updatetitle-ok Update the Turnouts' title cmdUpdatetitle +# +# +fontSelCancel Cancel fontSelW +fontSelList List fontSelW +fontSelOk Ok fontSelW +fontSelSample Sample fontSelW +fontSelSize Size fontSelW +fontSelSlant Slant fontSelW +fontSelW Font selection dialog +fontSelWeight Weight fontSelW +# +printAbortW Printer Abort Window +printFileName Print to filename +printFontAlias Specify Postscript font alias mapping +printSetup Displays the Print Setup window to change printers, orientation, paper size, etc. +printSetupCancel Closes this dialog printSetup +printSetupFormat Page orientation printSetup +printSetupMargin Unprintable margins printSetup +printSetupOk Updates and closes this dialog printSetup +printSetupPaper Choose paper size printSetup +printSetupPrinter Choose printer printSetup +printSetupTest Print test page printSetup +# +# +about No Help nohelp +about-about No Help nohelp +about-ok nohelp +cmdDebug No Help nohelp +loosen No Help nohelp +misc-cur-turnout-ep +misc-toolbarset No Help nohelp +misc-showlayout No Help nohelp +misc-showdisplay No Help nohelp +misc-showcmdopt No Help nohelp +misc-showeasement No Help nohelp +misc-showfontSel No Help nohelp +misc-showgrid No Help nohelp +misc-showdebug No Help nohelp +misc-sticky No Help nohelp +misc-showpref No Help nohelp +misc-showcolor No Help nohelp +misc-showfileClear No Help nohelp +misc-showparamFile No Help nohelp +misc-showpriceList No Help nohelp +misc-showprint No Help nohelp +misc-showprintSetup No Help nohelp +misc-showprintBitmap No Help nohelp +misc-showpartsList No Help nohelp +misc-shownotes No Help nohelp +misc-showundo No Help nohelp +misc-showredo No Help nohelp +misc-showcut No Help nohelp +misc-showcopy No Help nohelp +misc-showpaste No Help nohelp +misc-showdelete No Help nohelp +misc-showtunnel No Help nohelp +misc-showabove No Help nohelp +misc-showbelow No Help nohelp +misc-showwidth0 No Help nohelp +misc-showwidth2 No Help nohelp +misc-showwidth3 No Help nohelp +misc-showrecompelev No Help nohelp +misc-showcardesc No Help nohelp +misc-showcaradd No Help nohelp +misc-showselectAll No Help nohelp +misc-showimport No Help nohelp +misc-showexport No Help nohelp +misc-showexportDXF No Help nohelp +misc-showloosen No Help nohelp +misc-group-objects No Help nohelp +misc-ungroup-objects No Help nohelp +misc-showcustomMgm No Help nohelp +misc-showlayers No Help nohelp +misc-showmoveToCurrentLayer No Help nohelp +misc-showselectCurrentLayer No Help nohelp +misc-showclearElevations No Help nohelp +misc-showaddElevations No Help nohelp +debug-Track No Help nohelp +debug-EndPt No Help nohelp +debug-ReadTracks No Help nohelp +debug-Curve No Help nohelp +debug-Join No Help nohelp +debug-Turnout No Help nohelp +debug-Structure No Help nohelp +debug-Print No Help nohelp +debug-ok nohelp +map-canvas No Help nohelp +# +cmdLayerShow0 Layer cmdLayer +cmdLayerShow1 Layer cmdLayer +cmdLayerShow2 Layer cmdLayer +cmdLayerShow3 Layer cmdLayer +cmdLayerShow4 Layer cmdLayer +cmdLayerShow5 Layer cmdLayer +cmdLayerShow6 Layer cmdLayer +cmdLayerShow7 Layer cmdLayer +cmdLayerShow8 Layer cmdLayer +cmdLayerShow9 Layer cmdLayer +cmdLayerShow10 Layer cmdLayer +cmdLayerShow11 Layer cmdLayer +cmdLayerShow12 Layer cmdLayer +cmdLayerShow13 Layer cmdLayer +cmdLayerShow14 Layer cmdLayer +cmdLayerShow15 Layer cmdLayer +cmdLayerShow16 Layer cmdLayer +cmdLayerShow17 Layer cmdLayer +cmdLayerShow18 Layer cmdLayer +cmdLayerShow19 Layer cmdLayer |