summaryrefslogtreecommitdiff
path: root/doc/sane-mustek_pp.man
diff options
context:
space:
mode:
authorJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
committerJörg Frings-Fürst <debian@jff-webhosting.net>2014-10-06 14:00:40 +0200
commit6e9c41a892ed0e0da326e0278b3221ce3f5713b8 (patch)
tree2e301d871bbeeb44aa57ff9cc070fcf3be484487 /doc/sane-mustek_pp.man
Initial import of sane-backends version 1.0.24-1.2
Diffstat (limited to 'doc/sane-mustek_pp.man')
-rw-r--r--doc/sane-mustek_pp.man490
1 files changed, 490 insertions, 0 deletions
diff --git a/doc/sane-mustek_pp.man b/doc/sane-mustek_pp.man
new file mode 100644
index 0000000..1316cf2
--- /dev/null
+++ b/doc/sane-mustek_pp.man
@@ -0,0 +1,490 @@
+.TH sane\-mustek_pp 5 "13 Jul 2008"
+.de EX
+.sp
+.nf
+.ft CW
+..
+.de EE
+.ft R
+.fi
+.sp
+..
+.IX sane\-mustek_pp
+.SH NAME
+sane\-mustek_pp \- SANE backend for Mustek parallel port flatbed scanners
+.SH DESCRIPTION
+The
+.B sane\-mustek_pp
+library implements a SANE (Scanner Access Now Easy) backend that
+provides access to Mustek parallel port flatbed scanners and OEM versions.
+
+There are 2 classes of Mustek parallel port scanners: regular
+.B CCD
+(cold cathode device) scanners and
+.B CIS
+(contact image sensor) scanners.
+.P
+The current version of this backend supports both CCD type scanners and
+CIS type scanners.
+.P
+The following scanners might work with this backend:
+
+.SS "CCD scanners"
+
+.EX
+Model: ASIC ID: CCD Type: works:
+--------------------------------------------------------------
+SE 6000 P 1013 00 yes
+SM 4800 P 1013/1015 04/01 yes
+SE 1200 ED Plus 1015 01 no
+SM 1200 ED Plus 1015 01 no
+SE 12000 P 1505 05 no
+600 III EP Plus 1013/1015 00/01 yes
+SE 600 SEP 1013 ?? yes
+600 II EP ???? ?? no
+MD9848 1015 00 yes
+Gallery 4800 ???? ?? yes
+Viviscan Compact II 1013 00 yes
+.EE
+.SS CIS scanners
+.EX
+Model: ASIC ID: works:
+-----------------------------------------------
+Mustek 600 CP & 96 CP 1015 yes (*)
+Mustek 1200 CP 1015 yes
+Mustek 1200 CP+ 1015 yes
+.EE
+
+.EX
+OEM versions Original works
+--------------------------------------------------
+Medion/LifeTec/Tevion
+ MD/LT 9350/9351 1200 CP yes
+ MD/LT 9850/9851 1200 CP maybe (**)
+ MD/LT 9858 1200 CP probably
+ MD/LT 9890/9891 1200 CP yes
+Targa
+ Funline TS12EP 1200 CP yes
+ Funline TS6EP 600 CP yes
+Trust
+ Easy Connect 9600+ 600 CP yes
+Cybercom
+ 9352 1200 CP yes (***)
+.EE
+.HP
+(*) Calibration problems existed with earlier version of
+this driver. They seem to be solved now.
+.HP
+(**) Problems have been reported in the past for the
+MD/LT9850 type (striped scans, head moving in wrong
+direction at some resolutions). It is not known whether
+the current version of the driver still has these problems.
+.PP
+.B IF YOU HEAR LOUD CLICKING NOISES, IMMEDIATELY UNPLUG THE SCANNER !
+(This holds for any type of scanner).
+.HP
+(***) Possibly, the engine_delay parameter has to be set to 1 ms
+for accurate engine movements.
+.PP
+Please note that this backend is still under construction. Certain models
+are currently not supported and some may never be because the communication
+protocol is still unknown (eg., SE 12000 P).
+.PP
+Some scanners work faster when
+.B EPP/ECP
+is enabled in the BIOS. EPP mode however may lead to hard-locks on some Linux
+systems. If that is the case for you, you can either disable ECP/EPP in your
+BIOS or disable it in the backend itself (see GLOBAL OPTIONS).
+.PP
+Note that the backend needs to run as root or has to have appropriate access
+rights to /dev/parport* if libieee1284 support is compiled in. To allow user
+access to the scanner run the backend through the network interface (See
+saned(8) and sane\-net(5)). Note also that the backend
+.I does not
+support
+.IR "parport sharing" ,
+i.e. if you try printing while scanning, your computer may crash. To enable
+parport sharing, you have to enable libieee1284 at compile time. This backend
+also conflicts with the
+.I sane\-musteka4s2
+backend. You can only enable one of them in your dll.conf. However, you have
+to enable the backend explicitly in your dll.conf, just remove the hash mark
+in the line "mustek_pp".
+
+.SH "DEVICE DEFINITION"
+This backend allows multiple devices being defined and configured via the
+.B mustek_pp.conf
+file (even simultaneously, provided that they are connected to different
+parallel ports). Please make sure to edit this file
+.B before
+you use the backend.
+.PP
+A device can be defined as follows:
+.PP
+.RS
+.I scanner <name> <port name> <driver>
+.RE
+.PP
+where
+.HP
+.B <name>
+is an arbitrary name for the device, optionally enclosed by double quotes,
+for instance "LifeTec 9350".
+.HP
+.B <port name>
+is the name of the parallel port to which the device is connected. In case
+libieee1284 is used for communication with the port
+.I (default
+.IR setup) ,
+valid port names are
+.BR parport0 ,
+.BR parport1 ,
+and
+.BR parport2 .
+.PP
+In case the backend is configured for raw IO
+.I (old
+.IR setup) ,
+port addresses have to be used instead of port names:
+.BR 0x378 ,
+.BR 0x278 ,
+or
+.BR 0x3BC .
+The mapping of parallel ports (lp0, lp1, and lp2) to these addresses
+can be different for different Linux kernel versions. For instance,
+if you are using a Kernel 2.2.x or better and you have only one
+parallel port, this port is named lp0 regardless of the base address. However,
+this backend requires the base address of your port. If you are not sure which
+port your scanner is connected to, have a look at your /etc/conf.modules,
+/etc/modules.conf and/or /proc/ioports.
+.PP
+If you are unsure which port to use, you can use the magic value
+.BR *
+to probe for your scanner.
+.PP
+.HP
+.B <driver>
+is the driver to use for this device. Currently available drivers are:
+.IP
+.BR cis600 " : for 600 CP, 96 CP & OEM versions"
+.br
+.BR cis1200 " : for 1200 CP & OEM versions"
+.br
+.BR cis1200+ " : for 1200 CP+ & OEM versions"
+.br
+.BR ccd300 " : for 600 IIIE P & OEM version"
+.IP
+.B Choosing the wrong driver can damage your scanner!
+.br
+Especially, using the 1200CP settings on a 600CP can be
+harmful. If the scanner starts making a loud noise, turn
+it off immediately !!!
+.PP
+Using the cis600 driver on a 1200CP or a 1200CP+ is probably not
+dangerous. The cis1200+ driver also works for the 1200CP, and using
+the cis1200 driver on a 1200CP+ will typically result in scans that
+cover only half of the width of the scan area (also not dangerous).
+.PP
+If unsure about the exact model of your OEM version, check the optical
+resolution in the manual or on the box: the 600CP has a maximum optical
+resolution of 300x600 DPI, whereas the 1200CP and 1200CP+ have a maximum
+optical resolution of 600x1200 DPI.
+.PP
+Examples:
+.PP
+.RS
+scanner "LifeTec 9350" 0x378 cis1200
+.PP
+scanner Mustek_600CP 0x378 cis600
+.PP
+scanner Mustek_600IIIEP * ccd300
+.RE
+
+If in doubt which port you have to use, or whether your scanner is
+detected at all, you can use
+.B sane\-find\-scanner \-p
+to probe all configured ports.
+
+.SH CONFIGURATION
+.PP
+The contents of the
+.B mustek_pp.conf
+file is a list of device definitions and device options that correspond to
+Mustek scanners. Empty lines and lines starting with a hash mark (#) are
+ignored. Options have the following format:
+.PP
+.RS
+.I option <name> [<value>]
+.RE
+.PP
+Depending on the nature of the option, a value may or may not be present.
+Options always apply to the scanner definition that precedes them. There
+are no global options. Options are also driver-specific: not all drivers
+support all possible options.
+
+.SS Common options
+.TP
+.B bw <value>
+Black/white discrimination value to be used during lineart scanning. Pixel
+values below this value are assumed to be black, values above are
+assumed to be white.
+.br
+Default value: 127
+.br
+Minimum: 0
+.br
+Maximum: 255
+.sp
+Example: option bw 150
+
+.SS CIS driver options
+.TP
+.B top_adjust <value>
+Vertical adjustment of the origin, expressed in millimeter (floating point).
+This option can be used to calibrate the position of the origin, within
+certain limits. Note that CIS scanners are probably temperature sensitive, and
+that a certain inaccuracy may be hard to avoid. Differences in offset between
+runs in the order of 1 to 2 mm are not unusual.
+.br
+Default value: 0.0
+.br
+Minimum: \-5.0
+.br
+Maximum: 5.0
+.br
+.sp
+Example: option top_adjust \-2.5
+.TP
+.B slow_skip
+Turns fast skipping to the start of the scan region off. When the region to
+scan does not start at the origin, the driver will try to move the scanhead
+to the start of the scan area at the fastest possible speed. On some models,
+this may not work, resulting in large inaccuracies (up to centimeters).
+By setting this option, the driver is forced to use normal speed during
+skipping, which can circumvent the accuracy problems. Currently, there are
+no models for which these inaccuracy problems are known to occur.
+.sp
+By default, fast skipping is used.
+.sp
+Example: option slow_skip
+.TP
+.B engine_delay <value>
+Under normal circumstances, it is sufficient for the driver to wait for the
+scanner signaling that the engine is stable, before a new engine command can
+be transmitted. In rare cases, certain scanners and/or parallel port chipsets
+appear to prevent reliable detection of the engine state. As a result, engine
+commands are transmitted too soon and the movement of the scanner head becomes
+unreliable. Inaccuracies ranging up to 10 cm over the whole vertical scan
+range have been reported. To work around this problem, the engine_delay option
+can be set. If it is set, the driver waits an additional amount of time after
+every engine command, equal to the engine_delay parameter, expressed in
+milliseconds. It practice an engine_delay of 1 ms is usually sufficient. The
+maximum delay is 100 ms.
+.sp
+Note that every additional ms of delay can add up to 14 seconds to the total
+scanning time (highest resolution), so an as small as possible value is
+preferred.
+.sp
+Default value: 0
+.br
+Minimum: 0
+.br
+Maximum: 100
+.sp
+Example: option engine_delay 1
+
+.SS CCD driver options
+.TP
+.B top <value>
+Number of scanlines to skip to the start of the scan area. The number can
+be any positive integer. Values known to me are 47 and 56.
+.sp
+Default value: 47
+.br
+Minimum: 0
+.br
+Maximum: none
+.br
+.sp
+Example: option top 56
+.TP
+.B waitbank <value>
+The number of usecs to wait for a bank change. You should not touch this
+value actually. May be any positive integer
+.sp
+Default value: 700
+.br
+Minimum: 0
+.br
+Maximum: none
+.sp
+Example: option waitbank 700
+.PP
+A sample configuration file is shown below:
+.PP
+.EX
+#
+# LifeTec/Medion 9350 on port 0x378
+#
+scanner "LifeTec 9350" 0x378 cis1200
+
+# Some calibration options (examples!).
+option bw 127
+option top_skip \-0.8
+
+#
+# A Mustek 600CP on port 0x3BC
+#
+scanner "Mustek 600CP" 0x3BC cis600
+
+# Some calibration options (examples!).
+option bw 120
+option top_skip 1.2
+
+#
+# A Mustek 1200CP+ on port 0x278
+#
+scanner "Mustek 1200CP plus" 0x278 cis1200+
+
+# Some calibration options (examples!).
+option bw 130
+option top_skip 0.2
+
+#
+# A Mustek 600 III EPP on port parport0
+#
+scanner "Mustek 600 III EPP" parport0 ccd300
+
+# Some calibration options (examples!).
+option bw 130
+option top 56
+.EE
+
+.SH GLOBAL OPTIONS
+.PP
+You can control the overall behaviour of the mustek_pp backend by global
+options which precede any scanner definition in the mustek_pp.conf file.
+.sp
+Currently, there is only one global option:
+
+.SS Global options
+.TP
+.B no_epp
+Disable parallel port mode EPP: works around a known bug in the Linux parport
+code. Enable this option, if the backend hangs when trying to access the
+parallel port in EPP mode.
+.sp
+Default value: use EPP
+.sp
+Example: option no_epp
+
+.SH FILES
+.TP
+.I @CONFIGDIR@/mustek_pp.conf
+The backend configuration file (see also description of
+.B SANE_CONFIG_DIR
+below).
+.TP
+.I @LIBDIR@/libsane\-mustek_pp.a
+The static library implementing this backend.
+.TP
+.I @LIBDIR@/libsane\-mustek_pp.so
+The shared library implementing this backend (present on systems that
+support dynamic loading).
+
+.SH ENVIRONMENT
+.TP
+.B SANE_CONFIG_DIR
+This environment variable specifies the list of directories that may
+contain the configuration file. Under UNIX, the directories are
+separated by a colon (`:'), under OS/2, they are separated by a
+semi-colon (`;'). If this variable is not set, the configuration file
+is searched in two default directories: first, the current working
+directory (".") and then in @CONFIGDIR@. If the value of the
+environment variable ends with the directory separator character, then
+the default directories are searched after the explicitly specified
+directories. For example, setting
+.B SANE_CONFIG_DIR
+to "/tmp/config:" would result in directories "tmp/config", ".", and
+"@CONFIGDIR@" being searched (in this order).
+.TP
+.B SANE_DEBUG_MUSTEK_PP
+If the library was compiled with debug support enabled, this
+environment variable controls the debug level for this backend. E.g.,
+a value of 128 requests all debug output to be printed. Smaller
+levels reduce verbosity.
+.EX
+level debug output
+--------------------------------------
+ 0 nothing
+ 1 errors
+ 2 warnings & minor errors
+ 3 additional information
+ 4 debug information
+ 5 code flow (not supported yet)
+ 6 special debug information
+.EE
+.TP
+.B SANE_DEBUG_SANEI_PA4S2
+This variable sets the debug level for the SANE interface for the Mustek
+chipset A4S2. Note that enabling this will spam your terminal with some
+million lines of debug output.
+.EX
+level debug output
+----------------------------
+ 0 nothing
+ 1 errors
+ 2 warnings
+ 3 things nice to know
+ 4 code flow
+ 5 detailed code flow
+ 6 everything
+.EE
+
+.SH "SEE ALSO"
+sane(7), sane\-mustek(5), sane\-net(5), saned(8), sane\-find\-scanner(1)
+
+.TP
+For latest bug fixes and information see
+.I http://www.penguin\-breeder.org/sane/mustek_pp/
+
+.TP
+For additional information on the CIS driver, see
+.I http://home.scarlet.be/eddy_de_greef/
+
+.SH AUTHORS
+.nf
+Jochen Eisinger <jochen at penguin\-breeder dot org>
+Eddy De Greef <eddy_de_greef at scarlet dot be>
+.fi
+
+.SH BUGS
+Too many... please send bug reports to
+.I sane\-devel@lists.alioth.debian.org
+(note that you have to subscribe first to the list before you can send
+emails... see http://www.sane\-project.org/mailing\-lists.html)
+
+.SH BUG REPORTS
+If something doesn't work, please contact us (Jochen for the CCD scanners,
+Eddy for the CIS scanners). But we need some information about
+your scanner to be able to help you...
+
+.TP
+.I SANE version
+run "scanimage \-V" to determine this
+.TP
+.I the backend version and your scanner hardware
+run "SANE_DEBUG_MUSTEK_PP=128 scanimage \-L" as root. If you don't get any output
+from the mustek_pp backend, make sure a line "mustek_pp" is included into
+your @CONFIGDIR@/dll.conf.
+If your scanner isn't detected, make sure you've defined the right port address
+in your mustek_pp.conf.
+.TP
+.I the name of your scanner/vendor
+also a worthy information. Please also include the optical resolution and lamp type of your scanner, both can be found in the manual of your scanner.
+.TP
+.I any further comments
+if you have comments about the documentation (what could be done better), or you
+think I should know something, please include it.
+.TP
+.I some nice greetings